VND5E050MJTR-E

Les images sont à titre de référence seulement

VND5E050MJTR-E

IC PWR SWTCH N-CHAN 1:1 PWRSSO12

  • Fabricant
  • Mfr. Partie #VND5E050MJTR-E
  • Paquet HSOP12
  • Fiche de données
  • En stock3473

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT)
Series VIPower™
ProductStatus Obsolete
SwitchType General Purpose
NumberofOutputs 2
Ratio-Input:Output 1:1
OutputConfiguration High Side
OutputType N-Channel
Interface On/Off
Voltage-Load 4.5V ~ 28V
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 19A
RdsOn(Typ) 50mOhm (Max)
InputType Non-Inverting
Features Auto Restart
FaultProtection Current Limiting (Fixed), Over Temperature, Over Voltage
OperatingTemperature -40°C ~ 150°C (TJ)
MountingType Surface Mount
SupplierDevicePackage PowerSSO-12™

Vue d'ensemble

Description

VND5E050MJTR-E is an automotive high-side smart load switch from STMicroelectronics’ VIPower family. It integrates a high-side MOSFET with protection and diagnostic features to drive loads directly from a microcontroller.
Key points:
- Ratings: supports automotive voltages up to ~60 V and typical load currents around 5 A.
- Protections: current limit/overcurrent, short-to-ground, overvoltage, undervoltage, and thermal shutdown.
- Diagnostics: built-in fault/diagnostic output to report status to the controller.
- Control: EN/IN input to enable/disable the switch.
- Packaging: small HV package (TR-E = tape-and-reel), suitable for automotive PCB assemblies.
- Applications: LED lighting, relays/solenoids, pumps, and other motor/actuator loads in vehicles.
In short, it provides a compact, protected, and easy-to-control high-side switch to simplify automotive load driving and reduce external components.

Features

Concise features of VND5E050MJTR-E:
- 1-channel high-side smart switch with integrated MOSFET, rated for about 5 A.
- Current limit with short-circuit protection and auto-retry.
- Thermal shutdown protection to prevent damage.
- Undervoltage lockout and overvoltage protection.
- Diagnostic feedback via DIAG/open-load status for MCU monitoring.
- Slew-rate control / soft-start to limit inrush current.
- Reverse polarity protection and safe-off behavior in fault conditions.
- Automotive-grade device (AEC-Q100 qualified) suitable for 12 V systems and load-dump tolerant designs.
- Suitable applications: automotive actuators, solenoids, LEDs, and other load-switched circuits.

Package

PowerSSO-28 (28-pin) package with an exposed pad; Tape & Reel (TR) version.

Pinout

- Pin count: 28-pin package (HTSSOP-28 style)
- Function: VIPower 5-channel high-side switch array with current limitation and diagnostic. Provides five integrated load switches (high-side) with protection (short-circuit/overcurrent, thermal), suitable for automotive loads (lamps, solenoids, etc.), controlled by IN/EN and monitored via diagnostic outputs.

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- What kind of company: A global semiconductor and electronics company (multinational) that designs and manufactures integrated circuits, power devices, MEMS sensors, microcontrollers, and other semiconductor solutions.

Application

VND5E050MJTR-E is a 5-channel high-side switch designed for automotive body electronics. Applications: drive multiple loads (lamps, relays, solenoids, actuators, sensors, HVAC components) from a vehicle power line. Features include integrated protection and diagnostics: undervoltage, overcurrent/short-to-ground, short-to-battery, thermal shutdown, and current limiting, enabling safe, compact load switching and power distribution.

Equivalent

VND5E050MJTR-E is STMicroelectronics VIPower: a 60 V, ~5 A high-side smart switch with current limit and diagnostic.
Possible equivalents from other vendors:
- Infineon: TLE9250-1Q or TLE9255-1Q (60 V smart high-side switches)
- TI: TPS22960/TPS22962 (6 A load switches with diagnostic)
Note: exact cross-reference depends on package, current limit, and diagnostic features; verify electrical specs and pinout.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire