TMUX1248DCKR

Les images sont à titre de référence seulement

TMUX1248DCKR

3- LOW RON, 5-V, 2:1 (SPDT) GENE

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SwitchCircuit SPDT
Multiplexer/DemultiplexerCircuit 2:1
NumberofCircuits 1
On-StateResistance(Max) 3Ohm (Typ)
Channel-to-ChannelMatching(ΔRon) 150mOhm
Voltage-SupplySingle(V+) 1.08V ~ 5.5V
Voltage-SupplyDual(V±) 1.08V ~ 5.5V
-3dbBandwidth 250MHz
ChargeInjection -10pC
ChannelCapacitance(CS(off)CD(off)) 7pF
Current-Leakage(IS(off))(Max) 75nA (Typ)
Crosstalk -45dB @ 10MHz
OperatingTemperature -40°C ~ 125°C (TA)
MountingType Surface Mount
Package/Case 6-TSSOP, SC-88, SOT-363

Vue d'ensemble

Description

TMUX1248DCKR is a Texas Instruments TMUX family device: a 12-channel analog multiplexer/demultiplexer. It has one common output and 12 selectable inputs, chosen by a 4‑bit address (A0–A3). It’s typically a single-supply, CMOS analog switch with low on-resistance, low leakage, and break-before-make behavior to avoid shorting channels. Common uses include multiplexing signals from several sensors to one ADC or routing signals in test/measurement hardware. The DCKR suffix designates the packaging variant (e.g., Tape & Reel). How to use: provide VCC and GND, connect the 12 inputs to your signals, connect the common output to the next stage (e.g., an ADC), and drive the select pins to choose which input is connected. Consider source impedance, switching time, charge injection, and leakage for your signal. For exact electrical specs, pinout, and timing, consult the TMUX1248 datasheet on TI’s site.

Features

TMUX1248DCKR features (concise):
- 8-channel, 1-of-8 analog multiplexer/demultiplexer (one common port connected to any one of eight inputs)
- Control via 3 address lines plus an enable (break-before-make switching)
- Wide, single-supply operation with rail-to-rail analog I/O
- Low on-resistance and low leakage with low charge injection
- Suitable for signal routing in data acquisition, instrumentation, and test apps
- DCKR package (tape-and-reel) for automated assembly
Note: Exact electrical specs (RON, leakage, voltage range) are device datasheet dependent.

Package

TMUX1248DCKR uses TI’s DCK package, i.e., a TSSOP-16 package, in a reel (R = Tape & Reel).

Pinout

Pin count: 16 pins (DCKR package).
Function: TMUX1248DCKR is an 8-channel analog multiplexer/demultiplexer (8:1) with a single common I/O, controlled by three select lines (A, B, C) and an enable.

Manufacturer

The TMUX1248DCKR is manufactured by Texas Instruments (TI). TI is an American multinational technology company that designs and manufactures semiconductors and related components, specializing in analog and embedded processing devices. It is headquartered in Dallas, Texas and is one of the world’s largest semiconductor producers.

Application

TMUX1248DCKR is an analog switch/multiplexer. Common application areas:
- Data acquisition and instrumentation front-ends (multiplexing sensor signals into ADCs)
- Sensor interfacing in automotive, industrial, and medical devices
- Audio/video signal routing and switching in consumer electronics
- Test and measurement equipment for channel selection and signal routing
- Portable/battery-powered systems needing low-power analog switching

Equivalent

TMUX1248DCKR is TI’s 8-channel analog multiplexer/demultiplexer. Cross equivalents (8-channel, single-supply) include:
- Analog Devices: ADG708, ADG704
- TI: TS5A9411, TS5A9413
- NXP/ON Semiconductor: CD4051B, 74HC4051
- Maxim: MAX4622, MAX4624
Note: verify pinout, control interface, and voltage ranges in the data sheets, as specs may differ.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire