TM4C123GH6PZI7

Les images sont à titre de référence seulement

TM4C123GH6PZI7

IC MCU 32BIT 256KB FLASH 100LQFP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Rochester Electronics, LLC,Texas Instruments
Package Bulk,Tube
Series Tiva™ C
ProductStatus Active
CoreProcessor ARM® Cortex®-M4F
CoreSize 32-Bit Single-Core
Speed 80MHz
Connectivity CANbus, I²C, IrDA, Microwire, QEI, SPI, SSI, UART/USART, USB OTG
Peripherals Brown-out Detect/Reset, DMA, Motion PWM, POR, WDT
NumberofI/O 69
ProgramMemorySize 256KB (256K x 8)
ProgramMemoryType FLASH
EEPROMSize 2K x 8
RAMSize 32K x 8
Voltage-Supply(Vcc/Vdd) 1.08V ~ 3.63V
DataConverters A/D 22x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 100-LQFP

Vue d'ensemble

Description

TM4C123GH6PZI7 is TI’s Tiva C Series 32‑bit microcontroller built around an ARM Cortex‑M4F core, running up to 80 MHz. It pairs 256 KB of flash with about 32 KB of SRAM. Peripherals typically include USB 2.0 Full‑Speed, multiple serial interfaces (UARTs, SPI/SSI, I2C), GPIO, timers, PWM, a 12‑bit ADC, CRC, and a DMA controller. It supports low‑power modes and a watchdog, plus a built‑in bootloader for firmware updates. Development is supported by Code Composer Studio or Keil, with the TivaWare driver library and TI LaunchPad boards for quick prototyping. Applications span embedded control, data acquisition, USB devices, motor control, and general hobbyist projects. Debugging is via JTAG/SWD. Packaging varies (e.g., LQFP, other forms); check the datasheet or product page for exact pinout, memory map, and peripheral counts.

Features

Key features of TM4C123GH6PZI7 (Texas Instruments Tiva C):
- 32-bit ARM Cortex-M4F core with hardware FPU
- Up to 80 MHz operation
- Memory: 256 KB flash, 32 KB SRAM
- USB 2.0 Full-Speed device interface
- 12-bit ADC up to 1 MSPS (several input channels)
- PWM outputs for motor control and signaling
- Serial peripherals: UARTs, I2C, and SPI (SSI)
- Timers: multiple 16/32-bit general-purpose timers plus watchdog
- DMA (uDMA) controller with multiple channels
- Extensive GPIO with many I/O pins
- Debug: JTAG/SWD and on-chip debug features
- Clocking: external 25 MHz oscillator input with PLL for system clock
- Low-power modes: Sleep and Deep-Sleep with peripheral retention
Ideal for embedded applications requiring a capable MCU with mixed digital/analog peripherals and USB connectivity.

Package

64-pin LQFP (Low-Profile Quad Flat Package), i.e., LQFP-64.

Pinout

- Pin count: 100 pins (LQFP-100 package)
- Function: TI TM4C123GH6PZI7 is a 32-bit ARM Cortex-M4F microcontroller (Tiva C Series) used for embedded control, with integrated flash/RAM and peripherals (GPIO, timers, ADC, UART/SPI/I2C, USB, etc.).

Manufacturer

- Manufacturer: Texas Instruments Incorporated (TI).
- What kind of company: American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits (e.g., microcontrollers, DSPs, analog ICs) for automotive, industrial, consumer electronics, and communications markets.

Application

Key application areas for TM4C123GH6PZI7:
- Education and rapid prototyping (TI LaunchPad, teaching embedded systems)
- Real-time embedded control (motor control, robotics, servo control)
- USB-based devices and peripherals (USB full-speed interface)
- Data acquisition and sensing (ADC, timers, PWM; I2C/SPI/UART)
- IoT/edge computing and small embedded nodes
- Industrial automation and instrumentation
These leverage its Cortex-M4F, 80 MHz performance, and rich peripherals.

Equivalent

Direct TI equivalent: TM4C123GH6PM (same family; 80 MHz Cortex-M4F; 256 KB Flash; 32 KB RAM; same peripherals; different package).
Close alternatives (Cortex‑M4F, similar capacity):
- ST STM32F4 family (e.g., STM32F407/417): 80–100+ MHz, 0.5–1 MB+ Flash, 128–192 KB RAM; USB/CAN.
- NXP LPC4088/LPC4370: 80–100 MHz, 0.5–1 MB Flash, 64–96 KB RAM; USB/Ethernet.
- Microchip SAM4S: 100–120 MHz, 256–512 KB Flash, 64–128 KB RAM; USB.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire