TLV70025DDCR

Les images sont à titre de référence seulement

TLV70025DDCR

IC REG LINEAR 2.5V 200MA SOT23-5

  • Fabricant
  • Mfr. Partie #TLV70025DDCR
  • Paquet SOT23-5
  • Fiche de données
  • En stock7072

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT),Bulk
ProductStatus Active
OutputConfiguration Positive
OutputType Fixed
NumberofRegulators 1
Voltage-Input(Max) 5.5V
Voltage-Output(Min/Fixed) 2.5V
VoltageDropout(Max) 0.25V @ 200mA
Current-Output 200mA
Current-Quiescent(Iq) 55 µA
Current-Supply(Max) 270 µA
PSRR 68dB (1kHz)
ControlFeatures Enable
ProtectionFeatures Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case SOT-23-5 Thin, TSOT-23-5

Vue d'ensemble

Description

The TLV70025DDCR is a low-dropout (LDO) linear voltage regulator from Texas Instruments. It is part of the TLV700 series and is designed for efficient power management in various electronic devices. This specific model offers a fixed output voltage of 2.5V and can handle a maximum output current of 200mA.
Key features include a low quiescent current, making it suitable for battery-powered applications by conserving power when the device is idle. It also boasts a high power-supply rejection ratio (PSRR), which helps maintain stable output despite fluctuations in the input voltage. The device operates over a wide input voltage range and includes thermal shutdown and overcurrent protection to enhance reliability and safety.
The TLV70025DDCR comes in a small SOT-23 package, which is beneficial for applications with space constraints. It is commonly used in smartphones, tablets, and other portable electronics to ensure stable and efficient voltage regulation. Its design and features make it ideal for applications requiring a stable power supply with minimal power loss.

Features

The TLV70025DDCR is a low-dropout (LDO) linear voltage regulator from Texas Instruments. Key features include:
1. Output Voltage: Fixed at 2.5V.
2. Output Current: Supports up to 200 mA.
3. Low IQ: Quiescent current is typically around 31 µA, enhancing battery life.
4. Dropout Voltage: Very low, typically 130 mV at full load, allowing for efficient power utilization.
5. Input Voltage Range: 2 V to 5.5 V, providing flexibility for various power supply sources.
6. Package: Available in SOT-23-5 package, which is compact and suitable for space-constrained applications.
7. Stability with Ceramic Capacitors: Designed to be stable with ceramic capacitors as low as 1 µF.
8. Protections: Features include thermal shutdown and current limit protection, ensuring reliable performance under extreme conditions.
9. Operating Temperature Range: -40°C to 125°C, making it suitable for a wide range of environmental conditions.
This device is ideal for applications requiring low power consumption and efficient voltage regulation, such as portable electronics, battery-powered devices, and wireless communications equipment.

Package

The TLV70025DDCR is packaged in a SOT-23 format, specifically a 5-pin small-outline transistor (SOT-23-5) package. This compact package is commonly used for small, surface-mounted devices in electronics.

Pinout

The TLV70025DDCR is a low-dropout (LDO) linear voltage regulator by Texas Instruments. It comes in a 5-pin SOT-23 package. The key pin functions are:
1. VIN (Pin 1): This is the input voltage pin where the supply voltage is connected. It can typically operate from 2 V to 5.5 V.
2. GND (Pin 2): This pin is connected to the ground or 0 V reference.
3. EN (Pin 3): The enable pin controls the regulator's output. When high, the regulator is enabled, and when low, it is disabled.
4. NC (Pin 4): This is a no-connect pin and does not have any electrical connection inside the chip.
5. VOUT (Pin 5): This is the output voltage pin where the regulated voltage is available. For the TLV70025 version, it outputs a fixed 2.5 V.
The TLV70025DDCR is designed for portable devices with high efficiency and low quiescent current, suitable for battery-powered applications.

Manufacturer

The TLV70025DDCR is manufactured by Texas Instruments. Texas Instruments is a global semiconductor company that designs and manufactures a wide range of electronic components and integrated circuits. The company is known for its innovations in the field of electronics and technology, producing components used in various applications such as industrial, automotive, personal electronics, and communications equipment.

Application

The TLV70025DDCR is a low-dropout (LDO) linear voltage regulator. It is commonly used in applications requiring low power consumption and a stable voltage supply, such as battery-powered devices, portable electronics, and wireless communication systems. Its features, like low quiescent current and low dropout voltage, make it ideal for use in smartphones, wearables, IoT devices, and other applications where energy efficiency and compact size are critical.

Equivalent

The TLV70025DDCR is a low-dropout (LDO) voltage regulator. Equivalent products include:
1. MIC5504-2.5YMT (Microchip)
2. NCP4681DSQ25T1G (ON Semiconductor)
3. LP2985A-25DBVR (Texas Instruments)
4. AMS1117-2.5 (Advanced Monolithic Systems)
5. XC6206P252MR (Torex Semiconductor)
These alternatives offer similar voltage regulation, output current, and package options. Always verify the specifications and compatibility with your application.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire