TCAN337GDCNR

Les images sont à titre de référence seulement

TCAN337GDCNR

IC TRANSCEIVER 1/1 SOT238

  • Fabricant
  • Mfr. Partie #TCAN337GDCNR
  • Paquet
  • Fiche de données
  • En stock3391

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Active
Type Transceiver
Protocol CANbus
Number of Drivers/Receivers 1/1
Receiver Hysteresis 120 mV
Data Rate 5Mbps
Voltage - Supply 3V ~ 3.6V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case SOT-23-8
Supplier Device Package SOT-23-8
Base Product Number TCAN337

Vue d'ensemble

Description

The TCAN337GDCNR is a high-speed CAN transceiver designed for automotive and industrial applications. It facilitates communication in Controller Area Network (CAN) systems, supporting both the CAN 2.0A and CAN 2.0B standards. The device operates with a supply voltage range of 4.5V to 5.5V and offers a data rate of up to 1 Mbps.
Key features include low power consumption, high noise immunity, and built-in fault protection mechanisms. The TCAN337GDCNR is packaged in a compact 8-pin SOIC format, making it suitable for space-constrained applications.
Its integrated features enhance reliability in high-vibration environments, while its low electromagnetic interference (EMI) makes it ideal for automotive systems. Overall, the TCAN337GDCNR is an efficient solution for reliable CAN communication in various applications.

Features

The TCAN337GDCNR is a high-speed CAN (Controller Area Network) transceiver designed for automotive and industrial applications. Key features include:
1. High Data Rate: Supports data rates up to 1 Mbps.
2. Low Power Consumption: Operates with minimal power, enhancing energy efficiency.
3. Wide Supply Voltage Range: Compatible with a voltage range of 4.5V to 5.5V.
4. High ESD Protection: Designed with robust electrostatic discharge protection (±8 kV contact, ±15 kV air).
5. Two-Wire Interface: Simplifies connection in CAN networks.
6. Temperature Range: Operational from -40°C to +125°C, suitable for harsh environments.
7. Dominant Time-Out: Prevents bus locking by automatically releasing the bus if a dominant state is detected for too long.
8. Low Electromagnetic Interference (EMI): Ensures compliance with stringent automotive standards.
These features make the TCAN337GDCNR ideal for reliable communication in advanced automotive networks and industrial control systems.

Package

The TCAN337GDCNR is offered in a VQFN (Very Thin Quad Flat No-lead) package type, specifically a 16-pin VQFN with a 3mm x 3mm footprint. This package design provides efficient thermal performance and compact size for integrated circuit applications.

Pinout

The TCAN337GDCNR is a CAN transceiver from Texas Instruments, designed for Controller Area Network (CAN) applications. It features a 16-pin VQFN (Very Thin Quad Flat No-lead) package.
Pin Count: 16 pins.
Pin Functions:
1. TXD - Transmit data input.
2. RXD - Receive data output.
3. CANH - High-level CAN bus connection.
4. CANL - Low-level CAN bus connection.
5. GND - Ground.
6. VCC - Supply voltage.
7. VIO - I/O voltage supply.
8. SLOPE - Slope control for signal rise/fall times.
9. STB - Standby mode control.
10. EN - Enable pin for the device.
11. RREF - Reference resistor connection.
12-16. Additional pins for protection and communication functions.
This device supports high-speed CAN communication, making it suitable for automotive and industrial applications.

Manufacturer

The TCAN337GDCNR is manufactured by Texas Instruments (TI), a leading global semiconductor company. Texas Instruments designs and produces a wide range of analog and embedded processing chips, which are utilized in various applications, including industrial, automotive, communications, and consumer electronics. Founded in 1930, TI is renowned for its innovation in analog technology and has a strong focus on research and development. The company is known for its extensive portfolio of integrated circuits (ICs) and is a key player in the semiconductor industry, providing solutions that enhance the performance and efficiency of electronic devices.

Application

The TCAN337GDCNR is a CAN transceiver primarily used in automotive and industrial applications. Its key areas include in-vehicle networking, industrial automation, building automation, and robotics. The device facilitates reliable communication in Controller Area Network (CAN) systems, enabling data exchange between microcontrollers and devices in harsh environments.

Equivalent

The TCAN337GDCNR is a CAN transceiver. Equivalent products include the MCP2551, SN65HVD230, TJA1050, and ISO1042. Ensure to check for compatibility in terms of voltage, speed, and features when selecting alternatives.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire