STM32L073RZT6TR

Les images sont à titre de référence seulement

STM32L073RZT6TR

IC MCU 32BIT 192KB FLASH 64LQFP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier STMicroelectronics
Package Tape & Reel (TR),Cut Tape (CT)
Series STM32L0
ProductStatus Active
CoreProcessor ARM® Cortex®-M0+
CoreSize 32-Bit Single-Core
Speed 32MHz
Connectivity I²C, IrDA, LINbus, SPI, UART/USART, USB
Peripherals Brown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
NumberofI/O 51
ProgramMemorySize 192KB (192K x 8)
ProgramMemoryType FLASH
EEPROMSize 6K x 8
RAMSize 20K x 8
Voltage-Supply(Vcc/Vdd) 1.8V ~ 3.6V
DataConverters A/D 15x12b; D/A 2x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 64-LQFP

Vue d'ensemble

Description

STM32L073RZT6TR is a low-power MCU from STMicroelectronics’ STM32L0 family. It uses a 32-bit ARM Cortex‑M0+ core, running up to about 32 MHz, designed for battery-powered and energy-efficient apps.
Key features:
- Memory: up to 128 KB Flash, ~20 KB RAM
- Peripherals: USB 2.0 Full‑Speed device, USART/UART, SPI, I2C/I2S, 12‑bit ADC, timers, DMA, and an LCD controller for small displays
- Analog/digital: multiple GPIOs with flexible alternate functions
- Power: operate 1.65–3.6 V with low‑power modes (Sleep, Stop, Standby) and RTC
- Package: suffixes indicate a 64‑pin package (RZT6) and Tape & Reel (TR) packaging
- Applications: wearable devices, battery-powered sensors, compact IoT nodes
- Development: supported by STM32CubeMX, HAL/LL drivers, and common IDEs (Keil, IAR, SW4STM32)
This makes it a good fit for cost- and power-sensitive embedded projects requiring USB and LCD capability.

Features

Key features of STM32L073RZT6TR:
- Core: 32-bit ARM Cortex-M0+ up to 32 MHz
- Ultra-low power: multiple sleep modes (Run, Sleep, Stop, Standby) with very low current
- Memory: up to 128 KB Flash and up to about 20 KB RAM (package dependent)
- USB: USB 2.0 Full-Speed device interface
- LCD: integrated LCD controller for multiplexed segment displays
- Clocks: HSE/HSI, LSE; PLL to generate 48 MHz for USB
- Peripherals: I2C, SPI, USART/UART (multiple instances); 12-bit ADC; multiple timers; RTC with calendar
- DMA and CRC: DMA controller and hardware CRC
- Watchdogs and security: IWDG/WWDG; BOR and option bytes with readout protection
- Power/voltage: operating 1.65–3.6 V; wide temperature range (-40 to 85°C)
- Packaging: available in compact packages (RZT variants) for dense designs
Note: exact memory sizes and package options vary by specific variant and package. Refer to the datasheet for definitive figures.

Package

LQFP-64 package (64-pin, package code RZ). The TR suffix indicates Tape-and-Reel packaging.

Pinout

- Pin count: 64 pins (LQFP64 package, ST part code STM32L073RZT6TR)
- Function: 32‑bit ARM Cortex‑M0+ microcontroller from the STM32L0 family (low‑power MCU for general embedded control with integrated peripherals).

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- What kind of company: A multinational semiconductor company that designs and manufactures integrated circuits, microcontrollers (including STM32), sensors, and related devices. Headquarters in Geneva, Switzerland; one of the world’s largest semiconductor producers.

Application

Applications of STM32L073RZT6TR include:
- Battery-powered and wearable devices
- USB peripherals and interfaces
- LCD-based human–machine interfaces (built-in LCD controller)
- Portable medical devices and patient monitors
- IoT/sensor nodes and smart home devices
- Industrial sensing, metering, and data loggers
- Compact consumer electronics requiring low power, USB, and LCD support

Equivalent

There isn’t an exact cross‑vendor drop‑in for STM32L073RZT6TR. Within ST, the closest pin‑compatible 48‑pin L0 MCU is STM32L072RZT6 (similar core, memory and peripherals). For non‑ST options, compare 32‑bit ARM MCUs with similar flash/RAM and peripherals (e.g., TI MSP432, NXP LPC55S6x). They won’t be pin‑ or software‑compatible. Use ST’s product selector to find exact equivalents.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire