STM32F437VIT6TR

Les images sont à titre de référence seulement

STM32F437VIT6TR

IC MCU 32BIT 2MB FLASH 100LQFP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier STMicroelectronics
Package Tape & Reel (TR),Cut Tape (CT)
Series STM32F4
ProductStatus Active
CoreProcessor ARM® Cortex®-M4
CoreSize 32-Bit Single-Core
Speed 180MHz
Connectivity CANbus, EBI/EMI, Ethernet, I²C, IrDA, LINbus, SPI, UART/USART, USB OTG
Peripherals Brown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
NumberofI/O 82
ProgramMemorySize 2MB (2M x 8)
ProgramMemoryType FLASH
RAMSize 256K x 8
Voltage-Supply(Vcc/Vdd) 1.8V ~ 3.6V
DataConverters A/D 16x12b; D/A 2x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 100-LQFP

Vue d'ensemble

Description

STM32F437VIT6TR is a high‑performance MCU from ST’s STM32F4 family. Key points:
- Core: 32‑bit ARM Cortex‑M4 with floating‑point unit and DSP instructions, up to 168 MHz.
- Memory: up to about 2 MB Flash and up to 256 KB RAM (device variant dependent).
- Peripherals: USB OTG (FS/HS), CAN, multiple SPI/I2C/UART, SDIO, broad timer suite, multiple 12‑bit ADCs and a DAC, DMA, and LCD‑TFT controller (LTDC) for displays.
- Package: 100‑pin LQFP (VIT6) in tape‑and‑reel (TR).
- Power: typical 1.8–3.6 V operating range with multiple low‑power modes.
- Development: supported by STM32CubeMX/HAL/LL, CMSIS, and ST ecosystem.
- Applications: display‑rich devices, motor control, audio, industrial controls, and embedded systems requiring high performance with DSP capability.
Note: exact flash/RAM counts and peripherals vary by device variant—check the official datasheet for the precise specification of STM32F437VIT6TR.

Features

Key features of the STM32F437VIT6TR (F4 family, Cortex-M4F):
- CPU: 32-bit ARM Cortex-M4F core with single-precision FPU and DSP, up to 168 MHz.
- Memory: Up to 2 MB Flash memory and up to 256 KB SRAM.
- Peripherals: USB On-The-Go FS, CAN 2.0B, SDIO, SPI, I2C, I2S, and UART/USART.
- Timers: Multiple advanced and general-purpose timers (TIM1, TIM2–TIM5, TIM8, etc.) with PWM capability.
- Analog: Up to 24-channel 12-bit ADC (multi-channel, high-speed) and 2x 12-bit DACs.
- LCD/Display: LTDC (LCD-TFT) controller; DCMI camera interface; external memory interfaces (FSMC) for SRAM/PSRAM and LCD.
- Memory/Bus: Flexible memory access with FSMC; DMA controllers (DMA1 and DMA2) for high-throughput data transfers.
- Crypto: Hardware cryptographic accelerator (CRYP) with HASH/RNG support.
- Power/Temperature: 1.7–3.6 V supply; industrial temperature range (-40 to 85°C).
- Other: Rich interrupt/customizable peripherals, debugging via SWD/JTAG.

Package

LQFP100 package (100-pin) in a 14x14 mm LQFP, Tape & Reel (TR) variant.

Pinout

- Pin count: 100 pins (LQFP-100, packaging variant TR indicates Tape & Reel)
- Function: 32-bit ARM Cortex-M4 microcontroller (STM32F4 family), with FPU, up to 168 MHz, integrated memory and peripherals for general-purpose MCU tasks.

Manufacturer

- Manufacturer: STMicroelectronics (ST).
- What kind of company: A multinational electronics and semiconductor company headquartered in Geneva, Switzerland. It designs, develops, and manufactures semiconductor solutions, including microcontrollers (like STM32), sensors, power devices, and analog ICs for automotive, industrial, and consumer markets.

Application

- Industrial automation and process control
- Motor drives (BLDC/stepper) and motion control
- Power electronics and digital power supplies
- Human–machine interfaces and TFT/LCD displays
- Audio processing and DSP applications
- Data acquisition, instrumentation and measurement systems
- Embedded consumer electronics
- Automotive/IVI instruments and dashboards
- Robotics, drones and smart devices
- Smart home/building automation and metering

Equivalent

There isn’t an exact one‑to‑one external (non-ST) equivalent. The closest options are other STM32F4 devices in the same 100‑pin LQFP with similar flash/RAM and peripherals (e.g., F429/F439 variants). For exact cross‑references and pin/peripheral matches, use ST’s Cross‑Reference tool.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire