STM32F103C6T6ATR

Les images sont à titre de référence seulement

STM32F103C6T6ATR

IC MCU 32BIT 32KB FLASH 48LQFP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier STMicroelectronics
Package Tape & Reel (TR),Cut Tape (CT)
Series STM32F1
ProductStatus Active
CoreProcessor ARM® Cortex®-M3
CoreSize 32-Bit Single-Core
Speed 72MHz
Connectivity CANbus, I²C, IrDA, LINbus, SPI, UART/USART, USB
Peripherals DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT
NumberofI/O 37
ProgramMemorySize 32KB (32K x 8)
ProgramMemoryType FLASH
RAMSize 10K x 8
Voltage-Supply(Vcc/Vdd) 2V ~ 3.6V
DataConverters A/D 10x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 48-LQFP

Vue d'ensemble

Description

STM32F103C6T6 is a low‑cost member of ST’s STM32F1 family. It uses a 32‑bit ARM Cortex‑M3 core up to 72 MHz and sits in a 48‑pin package (T6). The C6 variant typically has about 32 KB of flash and around 10 KB of RAM, with a 2.0–3.6 V supply. It offers a versatile mix of peripherals: GPIO, multiple timers, 12‑bit ADC (and usually a DAC on some parts), USART/UART, SPI, I2C, DMA, RTC, and USB Full‑Speed on select devices. Easy to prototype with development tools such as STM32CubeIDE, HAL/LL libraries, and ST‑LINK or other SWD debuggers. Suitable for hobby and professional projects requiring moderate performance, simple motor control, sensing, and embedded control. In brief, it’s a cost‑effective 32‑bit MCU good for learning and small embedded applications; always check the exact memory and peripheral set from the datasheet for your specific package/version.

Features

Here are the key features of the STM32F103C6T6 (LQFP48, “C6” variant):
- Core: 32-bit ARM Cortex-M3, up to 72 MHz
- Memory: 32 KB flash, around 8 KB SRAM
- GPIO: up to ~37 general-purpose I/O pins
- ADC: 12-bit ADC, up to ~1 MSPS (multi-channel)
- Timers: TIM1 (16-bit advanced), TIM2–TIM4 (16-bit general-purpose)
- Communications: USART1–3, SPI1–2, I2C1–2
- USB: Full-speed USB 2.0 device
- DMA: multi-channel DMA controller (7 channels)
- Peripherals: CRC accelerator, watchdogs, and standard timer features
- Power/Voltage: 2.0–3.6 V supply
- Operating temp: -40 to 85°C
- Low-power modes: Sleep, Stop, Standby
- Clocking: HSE/HSI with PLL options
- Package: 48-pin LQFP (T6)
- Debug: SWD/JTAG interface
- Boot: boot from Flash
Note: exact RAM size and some peripheral counts can vary slightly by package/revision; the above reflects the C6T6 variant.

Package

Package: LQFP-32 (Low-Profile Quad Flat Package, 32 pins), typically 7×7 mm, 0.8 mm pitch. The ATR suffix indicates the supplier’s packaging option (packaging method).

Pinout

- Pin count: 48 pins (LQFP-48 / UFQFPN-48).
- Function: 32‑bit ARM Cortex‑M3 microcontroller (STM32F103 family) for general embedded control; includes on-chip flash (32 KB for the C6 variant) and peripherals such as GPIO, ADC, timers, USART/UART, SPI, and I2C (no USB on this variant).

Manufacturer

Manufacturer: STMicroelectronics (ST).
What kind of company: A multinational semiconductor and electronics components company that designs and manufactures microcontrollers (including STM32), sensors, analog and power devices, headquartered in Geneva, Switzerland.

Application

Common application areas for STM32F103C6T6ATR:
- Industrial automation and process control
- Motor control (BLDC/stepper) and drive systems
- Data acquisition and instrumentation
- IoT/edge devices and smart sensors
- Consumer electronics and home automation
- Automotive body electronics (CAN networking)
- Medical/portable medical devices (non-safety-critical)
- Prototyping, education, and hobby projects
Notes: 72 MHz Cortex-M3, USB FS, CAN, multiple ADCs/DACs, timers, serial interfaces enable these uses.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire