STM32C011J4M6

Les images sont à titre de référence seulement

STM32C011J4M6

IC MCU 32BIT 16KB FLASH 8SO

  • Fabricant
  • Mfr. Partie #STM32C011J4M6
  • Paquet
  • Fiche de données
  • En stock10462

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series STM32C0
Part Status Active
Base Product Number STM32C011
DigiKey Programmable Not Verified
Core Processor ARM® Cortex®-M0+
Core Size 32-Bit
Speed 48MHz
Connectivity I2C, IrDA, LINbus, SPI, UART/USART
Peripherals Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
Number of I/O 6
Program Memory Size 16KB (16K x 8)
Program Memory Type FLASH
RAM Size 6K x 8
Voltage - Supply (Vcc/Vdd) 2V ~ 3.6V
Data Converters A/D 7x12b SAR
Oscillator Type External, Internal
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Supplier Device Package 8-SO
Package 8-SOIC (0.154", 3.90mm Width)
Packaging Tray

Vue d'ensemble

Description

STM32C011J4M6 is a small, low-cost MCU from ST’s STM32C0 family. It uses a 32‑bit ARM Cortex‑M0+ core and runs up to 48 MHz, designed for budget sensors, controls, and IoT-style apps with tight power and cost constraints.
Key points:
- Core and speed: Cortex‑M0+ up to 48 MHz.
- Memory: on‑chip Flash and RAM sized in the tens of KB and KB range (sufficient for compact firmware).
- Peripherals: GPIO, multiple timers, 12‑bit ADC, serial interfaces (USART/UART, I2C, SPI), RTC, and watchdog.
- Power: operates from ~2.0–3.6 V with low‑power modes for sleep/stop.
- Package: J4M6 variant (defines the exact package/memory configuration for this device).
- Tooling: supported by STM32CubeMX/STMicroCubeIDE, HAL/LL libraries, and GCC/Clang toolchains.
Use cases: small controllers, embedded sensors, consumer devices, and other cost-sensitive applications requiring a simple, energy‑efficient MCU.

Features

Key features of STM32C011J4M6 (STM32C0 family):
- Core: ARM Cortex-M0+ 32-bit
- Speed: up to 48 MHz
- Memory (device dependent): 16 KB Flash, 4 KB RAM
- Analog: 12-bit ADC (with internal sensor)
- Timers: general-purpose timers (e.g., 16-bit), SysTick
- Communications: USART/UART, I2C, SPI
- DMA: basic DMA support
- Debug/Debug: SWD/JTAG interface
- Power: multiple low-power modes (Sleep, Stop, Standby); operate from 1.65 to 3.6V
- Protection/Reset: POR, BOR, option bytes
- I/O: up to ~24 GPIOs (package dependent)
- Packages: various options (up to 32 pins)
Note: exact memory size, peripherals, and pin count depend on the specific package/revision. Always consult the datasheet for the precise variant.

Package

UQFN-20 package (20-pin, 4×4 mm body).

Pinout

- Pin count: 20 pins.
- Function: A 32‑bit ARM Cortex‑M0+ microcontroller from ST’s STM32C0 family (STM32C011). It is intended for ultra-low‑power embedded control and includes typical peripherals such as serial interfaces (USART/UART, I2C, SPI), timers, a 12-bit ADC, watchdog, and various low‑power modes.

Manufacturer

- Manufacturer: STMicroelectronics (ST).
- What kind of company: A multinational semiconductor and electronics manufacturer (French-Italian origins, headquartered in Geneva, Switzerland) that designs and produces microcontrollers, sensors, power management ICs, and other semiconductor devices, including the STM32 family.

Application

Applications of STM32C011J4M6 include:
- IoT nodes and battery-powered sensors
- Smart home devices (thermostats, switches, hubs)
- Portable instruments, data loggers, and wearables
- Consumer electronics and accessories (remote controls, keyboards, LED drivers)
- Small industrial automation and motor-control for compact equipment
- Prototyping, education, and hobby projects needing a compact, low-power 32‑bit MCU

Equivalent

There isn’t an exact drop‑in equivalent to STM32C011J4M6. For ST parts, look at other STM32C0 family devices with the same core, similar flash/RAM and the same package (e.g., other C011 variants in the same SKU family). For cross‑vendor equivalents, consider Cortex‑M0+ MCUs with comparable memory from NXP (LPC800) or Microchip (SAMD0/SAMD1) lines, but expect differences in peripherals and pinouts. Use ST’s product selector to filter by core, memory and package for exact matches.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire