STGW40H120F2

Les images sont à titre de référence seulement

STGW40H120F2

IGBT 1200V 40A HS TO-247

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier STMicroelectronics
Package Tube
ProductStatus Active
IGBTType Trench Field Stop
Voltage-CollectorEmitterBreakdown(Max) 1200 V
Current-Collector(Ic)(Max) 80 A
Current-CollectorPulsed(Icm) 160 A
Vce(on)(Max)@VgeIc 2.6V @ 15V, 40A
Power-Max 468 W
SwitchingEnergy 1mJ (on), 1.32mJ (off)
InputType Standard
GateCharge 158 nC
Td(on/off)@25°C 18ns/152ns
TestCondition 600V, 40A, 10Ohm, 15V
OperatingTemperature -55°C ~ 175°C (TJ)
MountingType Through Hole
Package/Case TO-247-3

Vue d'ensemble

Description

STGW40H120F2 is STMicroelectronics’ dual IGBT power module. It houses two high-voltage, high-current IGBTs with anti-parallel diodes in one package, rated about 1.2 kV and 40 A per device. The F2 suffix indicates the two-channel version used in compact inverters and motor drives. Applications include motor drives, inverters, UPS, and power supplies. It is typically mounted on an isolated baseplate and cooled by forced air or liquid cooling, designed for common heatsink configurations. Key features include rugged safe-operating-area, fast switching, and easy paralleling of devices within the module. For exact electricals (Vces, Ic, Vge, switching times), thermal data, and packaging, consult the official datasheet. This module is useful when space and wiring need to be minimized without sacrificing performance or reliability.

Features

STGW40H120F2 is a dual IGBT module with two IGBTs and two fast-recovery diodes. Key features:
- 1,200 V blocking voltage
- 40 A continuous current per switch
- Two IGBTs + two anti-parallel fast-recovery diodes in one half-bridge package
- Optimized for motor drives, inverters, solar, and UPS applications
- High dV/dt and low conduction losses for improved efficiency
- Fully isolated baseplate for easy heatsinking
- Wide operating temperature range (typical −40°C to +125°C)
- Pb-free/halogen-free packaging; suitable for standard gate-drive schemes
Note: For exact electrical specs (Vcesat, switching times, short-circuit withstand, etc.), refer to the datasheet.

Package

IPAK – an isolated power-module package (IGBT module).

Pinout

Pin count: 8 terminals (two power terminals plus six signal pins).
Function: STGW40H120F2 is a dual high-power IGBT module (two N-channel IGBTs with anti-parallel diodes), rated around 1200 V and 40 A, intended for use as a half-bridge/inverter switching leg in motor drive and power conversion applications.

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- Company type: A multinational semiconductor and electronics company (global designer and manufacturer of ICs, discrete devices, power modules, MEMS/sensors, etc.), headquartered in Geneva, Switzerland.

Application

STGW40H120F2 is a 1200 V, 40 A IGBT module (two IGBTs/diodes in one package). Typical applications:
- Solar and other renewable-energy inverters
- AC motor drives (industrial and consumer)
- Uninterruptible power supplies (UPS) and DC–AC converters
- Inverter-based welding equipment
- Servo/stepper motor drive systems
- DC–DC converters and battery charging systems

Equivalent

STGW40H120F2 is a 1200 V, 40 A dual IGBT module. Common equivalents from other vendors include Infineon EconoDUAL 2 1200 V/40 A modules, Wolfspeed (Cree) 1200 V dual IGBT modules, and ON Semiconductor (Renesas) 1200 V dual IGBT modules with similar packaging. For exact cross-references, check ST’s cross-reference tool or distributor catalogs, as part numbers vary by package revision.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire