SN74LVTH16374DLR

Les images sont à titre de référence seulement

SN74LVTH16374DLR

IC FF D-TYPE DOUBLE 8BIT 48SSOP

  • Fabricant
  • Mfr. Partie #SN74LVTH16374DLR
  • Paquet
  • Fiche de données
  • En stock5407

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series 74LVTH
Part Status Active
Base Product Number 74LVTH16374
Function Standard
Type D-Type
Output Type Tri-State, Non-Inverted
Number of Elements 2
Number of Bits per Element 8
Clock Frequency 160 MHz
Max Propagation Delay @ V, Max CL 4.5ns @ 3.3V, 50pF
Trigger Type Positive Edge
Current - Output High, Low 32mA, 64mA
Voltage - Supply 2.7V ~ 3.6V
Current - Quiescent (Iq) 190 µA
Input Capacitance 3 pF
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Supplier Device Package 48-SSOP
Package 48-BSSOP (0.295", 7.50mm Width)
Packaging Bulk, Tape & Reel (TR)

Vue d'ensemble

Description

The SN74LVTH16374DLR is a TI 16‑bit buffer/driver with tri‑state (3‑state) outputs from the LVTH family. It buffers a 16‑bit data bus and can isolate it from other devices by tri-stating its outputs via an output‑enable control, enabling bus sharing without contention.
Key points:
- 16-bit parallel buffer/driver with 3-state outputs
- Low-voltage operation (Vcc ~1.65–3.6 V); LVTTL/CMOS input compatibility
- Output enable control to place outputs in high impedance
- Used to interface microcontrollers/CPUs to memory, peripherals, or buses; ideal for bus isolation and buffering
- Available in TI RoHS-compliant surface-mount packages (DLR suffix)
For exact pinout, drive strength, propagation delay, and electrical characteristics, consult the SN74LVTH16374DLR datasheet.

Features

Here are the key features of SN74LVTH16374DLR (TI):
- 16-bit D-type register with tri-state outputs (two 8-bit sections)
- Edge-triggered, rising-edge clocking
- Active-low output enable (OE) for 3-state bus operation
- Low-voltage operation (LV series): VCC typically 1.65 V to 3.6 V
- CMOS technology: high-speed, low-power operation
- TTL/CMOS compatible input thresholds
- Suitable for buffering/bus interfacing on microprocessor/mmemory buses
- 100% tested for dynamic performance and ESD protection
- Packaging: standard small-outline (DLR) form factor
Notes: For exact pinout, timing specs (tPD, tCLK, setup/hold), and recommended operating conditions, refer to the TI datasheet.

Package

It comes in a 28‑pin RoHS‑compliant small‑outline package (SOP).

Pinout

- Pin count: 20 pins (DLR package, i.e., 20‑pin SOIC).
- Function: 8-bit D-type latch/register with tri-state outputs (bus buffer/driver). It has D[7:0], Q[7:0], a clock input, an output-enable (OE), plus VCC and GND. When OE is active, Q outputs drive the bus; when OE is disabled, outputs are high-impedance.

Manufacturer

Manufacturer: Texas Instruments (TI).
TI is an American multinational technology company that designs and manufactures semiconductors and integrated circuits, specializing in analog, mixed-signal, and embedded processing products; one of the world’s largest semiconductor companies.

Application

SN74LVTH16374DLR is a 16-bit, tri‑state buffer/latch device. Common applications:
- Microprocessor/microcontroller bus buffering and demultiplexing (address/data bus)
- Memory and I/O expansion with 3-state bus drivers
- Data buffering and timing alignment between fast CPUs and slower peripherals
- Level-shifting and interfacing between different logic families
- General-purpose buffering/pipelining in embedded/FPGA-ASIC interfaces
Note: suited for high-speed, low-voltage CMOS environments (LVTTL/TTL compatibility).

Equivalent

Equivalent products (same function: 16-bit D-type register with 3‑state outputs):
- Nexperia 74LVTH16374
- ON Semiconductor MC74LVTH16374 (and related packaging variants)
Note: Use TI’s Cross Reference Tool to find additional cross‑references and exact package options for your region.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire