SN65HVD75DR

Les images sont à titre de référence seulement

SN65HVD75DR

IC TRANSCEIVER HALF 1/1 8SOIC

  • Fabricant
  • Mfr. Partie #SN65HVD75DR
  • Paquet SOIC (D)-8
  • Fiche de données
  • En stock4015

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Type Transceiver
Protocol RS422, RS485
NumberofDrivers/Receivers 1/1
Duplex Half
ReceiverHysteresis 80 mV
DataRate 20Mbps
Voltage-Supply 3V ~ 3.6V
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Vue d'ensemble

Description

The SN65HVD75DR is a high-speed CAN (Controller Area Network) transceiver designed for automotive and industrial applications. It facilitates robust communication in noisy environments, making it ideal for real-time control systems. This device operates on a voltage range of 4.5V to 5.5V and supports data rates up to 1 Mbps.
Key features include:
1. Differential Signaling: Enhances noise immunity and enables long-distance communication.
2. Low Power Consumption: Designed for energy-efficient applications, it features a low-power standby mode.
3. Wide Temperature Range: Suitable for harsh environments, it operates between -40°C to +125°C.
4. Integrated Protection: Built-in thermal shutdown and fault protection enhance reliability.
The SN65HVD75DR is commonly used in automotive diagnostics, industrial automation, and other applications requiring reliable network communication. Its compatibility with the CAN protocol ensures seamless integration into existing systems.

Features

The SN65HVD75DR is a high-speed CAN transceiver designed for Controller Area Network (CAN) applications. Key features include:
1. Data Rate: Supports data rates up to 1 Mbps.
2. Bus Fault Protection: Integrated protection against short circuits to battery and ground, enhancing reliability.
3. Low Power Consumption: Features a low-power standby mode, making it suitable for power-sensitive applications.
4. Wide Supply Voltage Range: Operates from 4.5V to 5.5V, accommodating various power supply environments.
5. Temperature Range: Designed to operate in industrial temperature ranges (-40°C to +125°C).
6. Dominant and Recessive State: Capable of detecting dominant and recessive states for robust communication.
7. Fail-Safe Features: Includes built-in fail-safe mechanisms to ensure proper operation in fault conditions.
This transceiver is ideal for automotive, industrial, and other applications requiring robust data communication over a CAN network.

Package

The SN65HVD75DR is housed in a 14-pin SOIC (Small Outline Integrated Circuit) package, designed for surface mounting.

Pinout

The SN65HVD75DR is a CAN transceiver with a total of 8 pins. It is designed for high-speed CAN (Controller Area Network) communication. The pin configuration and their functions are as follows:
1. VCC (Pin 1): Supply voltage.
2. GND (Pin 2): Ground reference.
3. TXD (Pin 3): Transmit data input.
4. RXD (Pin 4): Receive data output.
5. CANH (Pin 5): CAN bus high.
6. CANL (Pin 6): CAN bus low.
7. R_CAN (Pin 7): This pin is used for the CAN bus termination resistor.
8. TXD/RTS (Pin 8): Transmit request status output.
The device supports both standard and extended CAN frames and features low power consumption and high noise immunity, making it suitable for industrial applications.

Manufacturer

The SN65HVD75DR is manufactured by Texas Instruments (TI), a well-established American technology company. Texas Instruments specializes in the design and production of semiconductors and various integrated circuits, including analog, embedded processing, and digital signal processing technologies. Founded in 1930, the company is known for its innovation in the electronics industry, serving a wide range of markets, including automotive, industrial, consumer electronics, and communications. The SN65HVD75DR is a CAN (Controller Area Network) transceiver, designed for reliable data communication in various applications, making it an essential component in automotive and industrial networks.

Application

The SN65HVD75DR is a CAN transceiver used in automotive and industrial applications for reliable communication in noisy environments. Key areas include vehicle networks, industrial automation, building automation, medical devices, and robotics. It facilitates communication in Controller Area Network (CAN) systems, enabling robust data exchange among electronic control units (ECUs) and other devices.

Equivalent

The SN65HVD75DR is a CAN transceiver. Equivalent products include the MCP2551 from Microchip, the TJA1050 from NXP, and the ISO1042 from Texas Instruments. These alternatives provide similar functionality for controller area network (CAN) communications, ensuring compatibility in various applications. Always verify the specific requirements of your application to ensure a suitable replacement.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire