SC18IS600IPW/S8HP

Les images sont à titre de référence seulement

SC18IS600IPW/S8HP

IC I2C CONTROLLER SPI 16TSSOP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Last Time Buy
Protocol I²C
Function Controller
Interface SPI
Voltage-Supply 2.4V ~ 3.6V
Current-Supply 11mA
OperatingTemperature -40°C ~ 85°C
Package/Case 16-TSSOP (0.173, 4.40mm Width)

Vue d'ensemble

Description

The SC18IS600IPW/S8HP is a serial communication interface designed for microcontrollers and applications requiring I²C or SPI communication. It serves as a bridge between a microcontroller's serial communication ports and various peripheral devices, allowing for efficient data exchange.
Key features include support for I²C and SPI protocols, enabling flexibility in system design. The device operates at a wide voltage range (typically 2.3V to 5.5V), making it suitable for diverse applications. With a maximum clock frequency of 20 MHz, it ensures high-speed data transfer.
The SC18IS600IPW/S8HP is equipped with an integrated 8-bit I/O port, allowing for direct control of external components or interfacing with sensors and displays. Its compact package makes it suitable for space-constrained designs.
This chip is commonly used in automotive, industrial, and consumer electronics applications, providing improved communication capabilities in embedded systems. For detailed specifications, refer to the manufacturer's datasheet.

Features

The SC18IS600IPW/S8HP is an I2C-bus to SPI bridge from NXP Semiconductors. It allows microcontrollers that communicate via I2C to interface with SPI devices. Key features include:
1. Bus Interface: Supports I2C bus communication with a standard speed of up to 1 MHz.
2. SPI Interface: Compatible with SPI modes 0, 1, 2, and 3, allowing flexibility in interfacing with various SPI devices.
3. 8-bit Data Width: Transfers data in 8-bit chunks, which is typical for SPI communication.
4. Addressable Device: Supports multiple devices on the same I2C bus via unique addresses.
5. Multi-Slave Support: Can interface with multiple SPI slave devices.
6. Power Management: Includes low-power modes for energy-efficient operation.
7. Configurable Settings: Features programmable control registers for adjusting the SPI communication parameters.
This device is ideal for applications requiring communication between I2C and SPI devices, such as sensors, memory devices, and displays.

Package

The SC18IS600IPW/S8HP is packaged in a TQFP (Thin Quad Flat Package) with 32 pins. This package type is suitable for surface mounting and is designed for efficient heat dissipation and compactness in electronic applications.

Pinout

The SC18IS600IPW/S8HP is a serial I²C-bus to parallel interface bridge with a total of 28 pins.
Pin Count and Key Functions:
1. VDD: Power supply.
2. VSS: Ground.
3. SCL: Serial clock input.
4. SDA: Serial data input/output.
5. RESET: Active-low reset.
6. INT: Interrupt output.
7. A0, A1, A2: Address selection pins.
8. GPIO: General-purpose I/O pins.
9. Additional pins for configuration and control.
The device enables communication between an I²C master and a parallel peripheral, facilitating the connection of multiple devices to a single I²C bus. It supports multiple address configurations and provides interrupt functionality to signal events or data readiness.

Manufacturer

The SC18IS600IPW/S8HP is manufactured by NXP Semiconductors. NXP is a global semiconductor company that specializes in designing and manufacturing a wide range of products, including microcontrollers, processors, and interface solutions. Founded in 2006 as a spinoff from Philips, NXP focuses on automotive, industrial, and Internet of Things (IoT) applications. The company is recognized for its innovations in secure connectivity and processing technologies, catering to various markets such as automotive, consumer electronics, and smart infrastructure. NXP is headquartered in Eindhoven, Netherlands, and operates worldwide, providing comprehensive semiconductor solutions and services.

Application

The SC18IS600IPW/S8HP is a serial GPIO expander that allows microcontrollers to communicate with I2C or SPI interfaces. Its application areas include industrial automation, sensor management, LED control, and embedded systems where additional GPIO pins are needed. It's commonly used in consumer electronics, automotive systems, and robotics for interfacing with various peripherals like buttons, displays, and motors.

Equivalent

The SC18IS600IPW/S8HP chip is a Serial Controlled I/O Expander. Equivalent products include the PCA9536, PCA9535, and MCP23017, which also offer I/O expansion and I2C/SPI communication interfaces. Always verify specific features, pin configurations, and compatibility for your application.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire