S29AL016J70TFI010

Les images sont à titre de référence seulement

S29AL016J70TFI010

FLASH - NOR 16MBIT 1M X 16, 2M X

  • Fabricant
  • Mfr. Partie #S29AL016J70TFI010
  • Paquet
  • Fiche de données
  • En stock3492

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series AL-J
Part Status Active
DigiKey Programmable Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 16Mbit
Memory Organization 1M x 16, 2M x 8
Memory Interface CFI
Write Cycle Time - Word, Page 70ns, 150µs
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 48-TFSOP (0.724", 18.40mm Width)
Supplier Device Package 48-TSOP
Packaging Tray
Access Time 70 ns

Vue d'ensemble

Description

The S29AL016J70TFI010 is a 16-megabit (2 megabytes) NOR Flash memory device produced by Spansion (now part of Infineon Technologies). It is designed for embedded applications requiring non-volatile storage. The device features a 70-nanosecond access time, allowing for fast read operations, and operates on a supply voltage of 2.7V to 3.6V.
This Flash memory uses a uniform block architecture, typically divided into multiple blocks that allow for sector-based erasure and programming, enhancing flexibility and efficiency in memory management. It supports various interfaces, including asynchronous and synchronous modes, making it suitable for a wide range of applications in consumer electronics, automotive, and industrial systems.
With a typical endurance of around 100,000 write/erase cycles per block and a data retention period of up to 20 years, the S29AL016J70TFI010 is ideal for applications requiring reliable long-term data storage.

Features

The S29AL016J70TFI010 is a 16Mb (2MB) flash memory device from Spansion, featuring a 70ns access time. Key features include:
1. Organization: It has a 16-bit bus width with a memory configuration of 512KB x 16.
2. Architecture: Utilizes a single-level cell (SLC) architecture, allowing for reliable data retention and performance.
3. Interface: Supports asynchronous and synchronous read operations with an SPI (Serial Peripheral Interface) for easy integration.
4. Data Retention: Offers reliable data retention of up to 20 years.
5. Erase/Program Cycles: Capable of enduring up to 100,000 erase/program cycles, ensuring longevity.
6. Low Power Consumption: Designed for low power operation, making it suitable for battery-powered applications.
7. Operating Voltages: Typically operates in the range of 2.7V to 3.6V.
This device is commonly used in consumer electronics, automotive applications, and industrial systems, providing robust performance for various embedded applications.

Package

The S29AL016J70TFI010 is a 16 Megabit (2MB) Flash memory device packaged in a TSOP (Thin Small Outline Package) with a 48-pin configuration. It is designed for high-density applications and features a compact footprint suitable for various electronic devices.

Pinout

The S29AL016J70TFI010 is a 16 Megabit (2 Megabyte) NOR Flash memory device manufactured by Cypress Semiconductor. It has a total of 48 pins.
The primary functions of the pins include:
- Address Inputs (A0-A18): Used to select the memory locations.
- Data Inputs/Outputs (DQ0-DQ15): Used for data input and output.
- Chip Enable (CE): Activates the chip for read/write operations.
- Output Enable (OE): Controls the output buffer for reading data.
- Write Enable (WE): Initiates write operations.
- Reset (RESET): Used to reset the device.
- Vcc and Vss: Power supply and ground connections.
- Byte/Word (B/W): Selects between byte or word mode.
This device operates with a single 3.0V to 3.6V power supply and supports various modes, including asynchronous and synchronous operations.

Manufacturer

The S29AL016J70TFI010 is manufactured by Spansion, which is a subsidiary of Cypress Semiconductor Corporation. Spansion specializes in flash memory solutions, particularly NOR flash memory, which is commonly used in a variety of electronic devices, including automotive, industrial, and consumer electronics. Cypress Semiconductor, known for its advanced embedded system solutions, acquired Spansion in 2017, enhancing its portfolio in memory products. The company focuses on providing high-performance, reliable memory solutions that enable innovation in numerous applications.

Application

The S29AL016J70TFI010 is a 16Mb NOR Flash memory device commonly used in embedded systems. Its application areas include firmware storage for consumer electronics, automotive systems, industrial control, telecommunications equipment, and medical devices. It offers features like fast read speeds, low power consumption, and durability, making it suitable for storing code, configuration data, and other critical information in various electronic applications.

Equivalent

The S29AL016J70TFI010 is a 16Mb NOR Flash memory chip from Spansion. Equivalent products include:
1. Micron MT28EW016ABA
2. Winbond W25Q16JV
3. STMicroelectronics M29W016
4. Intel E28F160B
These alternatives may vary in specifications like voltage, timing, and package, so it's important to check compatibility for your specific application.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire