PN7160A1HN/C100E

Les images sont à titre de référence seulement

PN7160A1HN/C100E

IC NFC CONTROLLER I2C HVQFN40

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier NXP USA Inc.
Package Tray
ProductStatus Active
Type RFID Reader
Frequency 13.56MHz
Standards FeliCa, ISO 14443, ISO 15693, MIFARE, NFC
Interface I²C
Voltage-Supply 1.65V ~ 1.95V, 3V ~ 3.6V
OperatingTemperature -25°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 40-VFQFN Exposed Pad

Vue d'ensemble

Description

PN7160A1HN/C100E is NXP’s PN7160 NFC controller IC. It provides an integrated RF front-end and protocol stack to enable NFC reader/writer, card emulation, and peer-to-peer modes for multiple standards.
Key points:
- Protocols: NFC Forum Type A/B, FeliCa, and ISO/IEC 15693 (supporting cards/tags and mobile devices).
- Modes: Reader/Writer, Card Emulation (HCE), and Peer-to-Peer.
- Host interface: I2C or SPI to a microcontroller; handles RF field, anti-collision, timing, etc.
- Security: hardware cryptography (AES/DES), RNG, and secure-data handling for secure elements and HCE.
- Packaging/variant: A1HN denotes the package variant; C100E specifies a temperature/revision grade.
Typical applications:
- Embedded NFC readers in POS terminals and access control
- NFC-enabled devices and tags
- Smart posters and tag/card emulation use cases
Quick integration:
- Connect power, I2C/SPI, IRQ, and RST to the host MCU
- Add RF matching network
- Load firmware and run an NFC stack on the host or via PN7160’s firmware
Note: verify exact electricals and packaging in the latest datasheet.

Features

Here are the typical features of PN7160A1HN/C100E (NXP NFC Front-End):
- 13.56 MHz NFC front-end transceiver
- Supports ISO/IEC 14443 Type A/B and ISO/IEC 15693
- NFC Forum-compliant Tag emulation, Read/Write, and Peer-to-Peer (NFCIP-1)
- Card/tag compatibility: MIFARE DESFire (EV1/EV2), DESFire, Classic, and FeliCa (where firmware supports)
- Host interface options: SPI and I²C (configurable, MCU integration)
- RF field generation, automatic impedance matching, field detection and communication control
- Low-power modes with wake-on-field capability
- Industrial-grade temperature range (typical for A1/HN variants)
- Small-footprint package (A1HN) suitable for compact designs
Note: exact supported card types and crypto features can depend on firmware and revision; verify against the specific datasheet for PN7160A1HN/C100E.

Package

The "/C100E" suffix denotes tape-and-reel shipping (carrier reel, typically 1,000 pcs). For the IC package type (exact LGA/WLCSP/QFN variant and dimensions), please refer to the PN7160 datasheet or NXP ordering information.

Pinout

Pin count: 48 pins (HVQFN package).
Function: PN7160A1HN/C100E is an NFC front-end/controller IC (RF transceiver plus protocol engine) for contactless smart cards (ISO/IEC 14443 Type A/B, ISO/IEC 15693, FeliCa). It interfaces to a host MCU via SPI (and typically I2C), providing the 13.56 MHz RF front end and protocol processing for NFC/RFID applications.

Manufacturer

Manufacturer: NXP Semiconductors N.V. (commonly “NXP”).
What kind of company: NXP is a global Dutch semiconductor manufacturer that designs and supplies mixed-signal and digital integrated circuits and secure connectivity solutions (including NFC/RFID controllers, microcontrollers, processors and automotive, industrial and IoT semiconductor products).

Application

PN7160A1HN/C100E is an NFC controller front-end for embedded systems. Applications include:
- Reading/writing contactless cards and tags (ISO 14443/15693)
- Payment, loyalty and access-control terminals
- Transit ticketing and e-ID systems
- Secure identity/authentication in embedded devices
- NFC data exchange in IoT, wearables and smart posters

Equivalent

Direct equivalents to the NXP PN7160A1HN/C100E include NXP PN7150 and PN5180 (NFC controller/reader families), STMicroelectronics ST25R3916 / ST25R3911B (high‑performance NFC readers), Sony RC‑S series modules, and Broadcom/CSR NFC controller families. Select by required interface (I2C/SPI), HCI/firmware and secure‑element support.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire