PIC16F15325-I/ST

Les images sont à titre de référence seulement

PIC16F15325-I/ST

IC MCU 8BIT 14KB FLASH 14TSSOP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Microchip Technology
Package Tube
Series PIC® XLP™ 16F
ProductStatus Active
CoreProcessor PIC
CoreSize 8-Bit
Speed 32MHz
Connectivity I²C, LINbus, SPI, UART/USART
Peripherals Brown-out Detect/Reset, POR, PWM, WDT
NumberofI/O 12
ProgramMemorySize 14KB (8K x 14)
ProgramMemoryType FLASH
RAMSize 1K x 8
Voltage-Supply(Vcc/Vdd) 2.3V ~ 5.5V
DataConverters A/D 11x10b; D/A 1x5b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 14-TSSOP (0.173, 4.40mm Width)

Vue d'ensemble

Description

PIC16F15325-I/ST is an 8‑bit Microchip PIC microcontroller in the PIC16F family, intended for low‑cost, small‑footprint embedded designs. It combines a compact PIC16 core with on‑chip memory and a versatile peripheral set for sensing, control, and basic communications.
Key features (typical):
- Core and memory: 8‑bit PIC16F core with on‑chip Flash program memory, RAM, and EEPROM for data storage.
- Power and temperature: operates from about 2.0 to 5.5 V; industrial temperature range (suffix I/ST).
- Peripherals: GPIO ports, multiple timers, 8/10‑bit ADC, analog comparators, PWM/CCP, and a set of serial interfaces (MSSP/I2C, SPI, and USART/UART).
- Other: watchdog timer, Brown‑out Reset, Power‑on Reset; in‑circuit serial programming (ICSP) support.
- Packaging: available in small packages suitable for space‑constrained designs.
Applications: general embedded control, sensing, and simple motor or interface tasks in consumer, automotive, or industrial equipment.
Note: exact Flash/RAM sizes, peripheral counts, and package options vary by variant. Check the specific datasheet for your device revision.

Features

PIC16F15325-I/ST features (concise):
- 8-bit PIC16F1 microcontroller (mid‑range PIC16 architecture)
- Industrial temp range: -40°C to +85°C (I/ST)
- On‑chip memory: Flash program memory (up to several KB), RAM (a few hundred bytes), EEPROM (tens to hundreds of bytes) (sizes depend on package)
- Analog: 10‑bit ADC with multiple input channels
- Timers/CCP: multiple timers (8/16‑bit), Capture/Compare/PWM outputs
- Serial peripherals: EUSART (UART) and MSSP (I2C/SPI)
- Analog comparators and/or DAC features (depends on package)
- Low‑power modes: Sleep/Idle with wake‑up
- Robust clock options: internal oscillator plus external clock option
- Interrupts: multiple interrupt sources with priority
- Reliability: brown‑out/reset, watchdog timer
- Programming/debug: ICSP for in‑system programming
- Packages/coverage: various pin counts with I/ST packaging
Note: exact memory sizes, peripheral counts, and pin options vary by specific package; consult the datasheet for the exact device variant.

Package

PIC16F15325-I/ST is in a 14-pin surface-mount SOIC (SOP) package.

Pinout

Pin count: 14 pins (DIP/SOIC variants).
Function: It is an 8‑bit PIC microcontroller (PIC16F1x1 family) with built‑in flash RAM, I/O ports, and peripherals (ADC, timers, PWM, and serial interfaces such as USART/I2C/SPI) for general embedded control. Industrial temperature variant (-I) in ST package.

Manufacturer

- Manufacturer: Microchip Technology Inc.
- About the company: A multinational semiconductor company that designs, develops, and manufactures microcontrollers, memory, and analog ICs for embedded systems (home of the PIC microcontroller family).

Application

PIC16F15325-I/ST is a compact 8‑bit MCU for cost‑sensitive control tasks. Common application areas:
- Small appliances and consumer electronics
- LED lighting and backlight control
- Industrial sensors, data acquisition, and simple automation
- Battery-powered handheld/portable devices
- Home automation and control panels
- PWM motor control and general-purpose embedded control

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire