PCA9555DBR

Les images sont à titre de référence seulement

PCA9555DBR

IC I/O EXPANDER I2C 16B 24SSOP

  • Fabricant
  • Mfr. Partie #PCA9555DBR
  • Paquet SSOP-24
  • Fiche de données
  • En stock7690

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT),Bulk
ProductStatus Active
NumberofI/O 16
Interface I²C, SMBus
InterruptOutput Yes
Features POR
OutputType Push-Pull
Current-OutputSource/Sink 10mA, 25mA
ClockFrequency 400 kHz
Voltage-Supply 2.3V ~ 5.5V
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 24-SSOP (0.209, 5.30mm Width)

Vue d'ensemble

Description

The PCA9555DBR is an I2C-bus I/O port expander manufactured by NXP Semiconductors. It provides an efficient way to increase the number of GPIO (General Purpose Input/Output) pins available on microcontrollers, perfect for applications where additional digital inputs and outputs are needed.
Key features include:
1. 16 GPIO Pins: The PCA9555DBR offers 16 configurable I/O pins that can be set as either inputs or outputs.
2. I2C Interface: It communicates over the I2C bus, allowing it to connect to multiple devices using only two wires (SDA and SCL).
3. Interrupt Functionality: The device supports interrupt generation for inputs, enabling efficient handling of state changes without constant polling.
4. Multiple Addressing: The PCA9555DBR can be set to one of several I2C addresses, allowing multiple devices to be connected on the same bus.
Overall, the PCA9555DBR is ideal for expanding the I/O capabilities of embedded systems, making it suitable for various applications, including consumer electronics and industrial controls.

Features

The PCA9555DBR is an I2C-bus I/O port expander with the following key features:
1. 16-Bit I/O Ports: It provides 16 GPIO pins that can be configured as either inputs or outputs.
2. I2C Interface: It supports a two-wire I2C communication protocol, allowing for easy integration with microcontrollers and other I2C-compatible devices.
3. Interrupt Functionality: The device can generate interrupts on pin changes, enhancing responsiveness in applications.
4. Programmable Pull-Up Resistors: It includes internal pull-up resistors that can be enabled or disabled for each I/O pin.
5. Multiple Device Support: Multiple PCA9555 devices can be connected on the same I2C bus using different I2C addresses.
6. Low Power Consumption: The device operates with a supply voltage range of 2.3V to 5.5V, making it suitable for battery-operated devices.
7. Wide Temperature Range: It is rated for operation in a temperature range from -40°C to +125°C.
These features make the PCA9555DBR ideal for expanding I/O capabilities in various embedded applications.

Package

The PCA9555DBR is packaged in a TSSOP (Thin Shrink Small Outline Package) with 16 pins.

Pinout

The PCA9555DBR is a 16-pin I²C I/O port expander. It features the following pin functions:
1. VCC (Pin 1): Power supply voltage.
2. GND (Pin 2): Ground reference.
3. SCL (Pin 3): Serial clock input for I²C communication.
4. SDA (Pin 4): Serial data input/output for I²C communication.
5. A0, A1, A2 (Pins 5-7): Address selection pins for I²C address configuration.
6. RESET (Pin 8): Active-low reset pin.
7. P0.0 to P0.7 (Pins 9-16): I/O port pins for the first port. They can be configured as inputs or outputs.
The device allows for the expansion of GPIO capabilities in embedded systems, offering a simple way to interface additional I/O with a microcontroller using the I²C protocol.

Manufacturer

The PCA9555DBR is manufactured by NXP Semiconductors, a global semiconductor company that specializes in designing and providing various integrated circuits and solutions. NXP focuses on automotive, industrial, IoT, and mobile applications. The PCA9555 is a I2C-bus I/O port expander that offers additional GPIO pins for microcontrollers, allowing for expanded connectivity in embedded systems. NXP is known for its innovation in enabling secure connections and infrastructure in a wide range of electronic devices.

Application

The PCA9555DBR is a I2C-bus I/O port expander with interrupt capabilities. It is commonly used in applications requiring additional GPIOs, such as interfacing with sensors, controlling LEDs, or managing buttons in embedded systems. Typical areas include consumer electronics, industrial automation, and automotive systems, where increased I/O flexibility is needed without additional microcontroller pins.

Equivalent

The PCA9555DBR is an I2C I/O port expander. Equivalent products include:
1. MCP23017 - 16-bit I/O expander with I2C interface.
2. PCF8575 - 16-bit I/O expander with I2C.
3. TCA9555 - 16-bit I/O expander, also I2C-compatible.
4. MCP23008 - 8-bit I/O expander with I2C.
5. PCA9535 - 16-bit port expander with interrupt capability.
These alternatives can serve similar functions in digital interfacing applications.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire