PCA6408AHKX

Les images sont à titre de référence seulement

PCA6408AHKX

IC XPNDR 400KHZ I2C SMBUS 16XQFN

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Active
DigiKey Programmable Not Verified
Number of I/O 8
Interface I2C, SMBus
Interrupt Output Yes
Features POR
Output Type Push-Pull
Current - Output Source/Sink 10mA, 25mA
Clock Frequency 400 kHz
Voltage - Supply 1.65V ~ 5.5V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 16-XFQFN
Supplier Device Package 16-XQFN (1.8x2.6)
Base Product Number PCA6408

Vue d'ensemble

Description

The PCA6408AHKX is a low-voltage I²C I/O port expander designed by NXP Semiconductors. It offers 8 bidirectional GPIO (General Purpose Input/Output) pins that can be configured individually as inputs or outputs, enabling flexible control of external devices. This chip operates at a voltage range of 1.8V to 5.5V, making it suitable for various applications in consumer electronics, industrial control, and automotive systems.
The PCA6408AHKX communicates with microcontrollers via the I²C bus, allowing multiple devices to be connected on the same bus. It features an interrupt-driven interface, which can signal the host controller when an input state changes, optimizing processor efficiency. The device also includes internal pull-up resistors for inputs and can handle low-power modes to extend battery life in portable applications.
Overall, the PCA6408AHKX is an efficient solution for expanding I/O capabilities while minimizing pin count on microcontrollers.

Features

The PCA6408AHKX is an 8-bit I/O expander with I2C interface, designed for use in various electronic applications. Key features include:
1. I2C Interface: Operates over a wide voltage range with standard I2C communication up to 1 MHz.
2. 8 GPIO Pins: Configurable as either input or output, allowing for versatile interfacing with other devices.
3. Interrupt Functionality: Supports interrupt generation for pin state changes, enabling efficient event handling.
4. Programmable Pull-Up Resistors: Integrated pull-up resistors for input pins to ensure reliable signal levels.
5. Low Power Consumption: Designed for low power operation, making it suitable for battery-powered devices.
6. Wide Operating Voltage: Supports operation from 1.8V to 5.5V, accommodating various system voltage levels.
7. Multiple Device Support: Multiple PCA6408 devices can be connected on the same I2C bus with configurable addresses.
These features make the PCA6408AHKX ideal for applications requiring additional GPIO capabilities in microcontroller-based systems.

Package

The PCA6408AHKX is available in a TSSOP (Thin Shrink Small Outline Package) package type, specifically with a 20-pin configuration.

Pinout

The PCA6408AHKX is an 8-bit I/O port expander with an I2C interface. It features a total of 16 pins. The pinout includes:
1. VCC (Power supply)
2. GND (Ground)
3. SDA (Serial Data Line, I2C)
4. SCL (Serial Clock Line, I2C)
5. RESET (Reset input)
6. A0, A1, A2 (Address pins for I2C address selection)
7. GPIO0 to GPIO7 (General Purpose Input/Output pins)
The device can be used to increase the number of I/O pins available on a microcontroller while using just two I2C lines. Each GPIO can be configured as either an input or an output, making it versatile for various applications.

Manufacturer

The PCA6408AHKX is manufactured by NXP Semiconductors. NXP is a global semiconductor company that specializes in developing and providing a wide range of products, including microcontrollers, processors, and various analog and digital integrated circuits. Founded in 2006, NXP was spun off from Philips and has since focused on automotive, industrial, IoT, and mobile applications. The company is known for its innovation in secure connectivity solutions and has a strong presence in the automotive market, providing technologies that enhance vehicle safety and efficiency.

Application

The PCA6408AHKX is an I/O expander featuring GPIO capabilities, commonly used in embedded systems, consumer electronics, and industrial applications. Its primary application areas include interfacing with sensors and actuators, enhancing microcontroller I/O capacity, and facilitating communication in devices like smartphones, tablets, and home automation systems. Additionally, it can be utilized in robotics and automotive systems for monitoring and control tasks.

Equivalent

The PCA6408AHKX is an I²C I/O expander. Equivalent products include the MCP23008 from Microchip, which also offers 8 GPIO pins with I²C interface, and the TCA9555 from Texas Instruments, featuring 16 GPIOs. Other alternatives may include the PCF8575 and the PCA9535, depending on specific requirements such as pin count and additional features. Always verify compatibility and specifications before substitution.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire