NCP433FCT2G

Les images sont à titre de référence seulement

NCP433FCT2G

IC PWR SWITCH P-CHAN 1:1 4WLCSP

  • Fabricant
  • Mfr. Partie #NCP433FCT2G
  • Paquet WLCSP-4
  • Fiche de données
  • En stock5365

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SwitchType General Purpose
NumberofOutputs 1
Ratio-Input:Output 1:1
OutputConfiguration High Side
OutputType P-Channel
Interface On/Off
Voltage-Load 1V ~ 3.6V
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 1.5A
RdsOn(Typ) 35mOhm
InputType Non-Inverting
Features Load Discharge, Slew Rate Controlled
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
SupplierDevicePackage 4-WLCSP (0.76x0.76)

Vue d'ensemble

Description

NCP433FCT2G is ON Semiconductor’s fixed-threshold voltage supervisor (reset IC). It monitors Vcc and generates a deterministic reset signal to a microcontroller or digital logic when the supply is below its threshold or during power-up/power-down.
Key points:
- Fixed-threshold reset supervisor with predefined voltage trip point (variant-dependent) and built-in hysteresis.
- Provides a defined reset output to ensure reliable MCU startup; timing/pulse width specified in the datasheet.
- Very low quiescent current, suitable for battery-powered and energy-conscious designs.
- Package code FCT2G denotes a compact package variant; exact pinout and package details are in the datasheet.
Common uses:
- Microcontroller/FPGA/basically any digital logic reset at brown-out or power-on.
- Power-on reset and brown-out protection in embedded systems.
Note:
Exact threshold, reset polarity, timing, and package/pinout vary by variant. Check the datasheet for the precise numbers and the intended package.

Features

NCP433FCT2G is a microprocessor supervisor (voltage detector) with reset generation. Key features:
- Fixed-voltage threshold variants (POR/RESET when Vcc falls below threshold)
- Wide operating supply range (typical 1.65–5.5 V)
- Reset output: active-low, push-pull
- Manual reset input for external forcing of reset
- Fast, glitch-free power-on reset with defined minimum pulse width
- Very low quiescent current (microamp range)
- Robust against brown-out and fast transients
- Temperature range: -40°C to +125°C
- Small, RoHS-compliant package (FCT2G family) suitable for compact designs
Note: Specific threshold voltages and package options depend on the exact variant; refer to the datasheet for the precise values.

Package

SOT-23 (SC-70-3) surface-mount package.

Pinout

- Pin count: 5 pins (SOT-23-5/SC-70-5 package).
- Function: Microprocessor reset supervisor (voltage detector). It monitors VCC and generates an reset signal for a microcontroller when supply voltage falls below its threshold (reset output typically active low), providing brown-out protection.

Manufacturer

Manufacturer: ON Semiconductor (ON Semiconductor Corporation).
What kind of company: An American multinational semiconductor company that designs, manufactures, and sells energy-efficient power management, analog/logic ICs, sensors, and related semiconductor products for automotive, industrial, consumer, and communications markets.

Application

Applications of NCP433FCT2G include:
- Reset supervision for microcontrollers and digital ICs
- Power-on reset and brown-out protection
- Battery-powered/portable devices with low quiescent current
- Embedded systems, consumer electronics, automotive and industrial equipment
- Any system requiring a clean, glitch-free reset during power-up/down or supply fluctuations

Equivalent

Equivalent voltage supervisor/reset ICs (similar function/voltage range) include:
- TI: TLV803 family (including automotive TLV803-Q1), TPS3839, TPS3808/TPS3809
- Microchip: MCP130, MCP131, MCP134 series
- Maxim: MAX809/MAX810 (and MAX811)
- Analog Devices: ADM803/ADM804
- On Semiconductor: (cross-reference to NCP433 variants in a similar family)
Note: exact thresholds, reset delay, and pinouts vary—check datasheets for proper cross-reference and packaging.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire