N25Q128A13ESF40E

Les images sont à titre de référence seulement

N25Q128A13ESF40E

IC FLASH 128MBIT SPI 16SOP2

  • Fabricant
  • Mfr. Partie #N25Q128A13ESF40E
  • Paquet
  • Fiche de données
  • En stock9388

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Obsolete
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 128Mbit
Memory Organization 32M x 4
Memory Interface SPI
Write Cycle Time - Word, Page 8ms, 5ms
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295", 7.50mm Width)
Supplier Device Package 16-SOP2
Base Product Number N25Q128A13
Clock Frequency 108 MHz

Vue d'ensemble

Description

The N25Q128A13ESF40E is a 128 Mb (16 MB) serial NOR Flash memory device produced by Micron Technology. It is part of the N25Q series and is designed for use in a variety of electronic applications requiring non-volatile memory storage. This memory chip utilizes the industry-standard Serial Peripheral Interface (SPI), which allows for efficient communication and data transfer between the memory and other components in embedded systems.
Key features include:
- Density: 128 megabits (16 megabytes) of storage capacity.
- Interface: SPI protocol, supporting single, dual, and quad I/O operations for flexible data transfer rates.
- Performance: Fast read speeds and erase times, suitable for high-performance applications.
- Voltage Range: Operates at 2.7V to 3.6V, making it energy efficient.
- Endurance: Endures up to 100,000 program/erase cycles per sector, with data retention of up to 20 years.
- Package: Available in various packages, including WSON, SOIC, and USON, providing adaptability for different design needs.
This memory is ideal for applications such as boot code storage, firmware updates, and data logging in consumer electronics, industrial systems, and automotive applications.

Features

The N25Q128A13ESF40E is a 128 Mb (16 MB) Serial NOR Flash memory device from Micron Technology. Key features include:
1. Memory Organization: It is organized as 16,777,216 bytes, with uniform 4 KB sectors and 64 KB uniform blocks.
2. Interface: It supports a Serial Peripheral Interface (SPI) with single, dual, and quad I/O options, enhancing data transfer rates.
3. Clock Frequency: The device operates at a maximum clock frequency of 50 MHz in standard SPI mode, which can be increased in dual and quad modes.
4. Voltage Supply: It operates with a single 2.7V to 3.6V power supply.
5. Security Features: Includes a 256-bit unique device identifier, write protection, and a password protection scheme for security.
6. Performance: Offers fast program and erase times with page program time of 0.7 ms typical, and sector erase time of 60 ms typical.
7. Endurance and Data Retention: It provides 100,000 program/erase cycles per sector and data retention of 20 years.
8. Operating Temperature: Supports a wide temperature range from -40°C to +85°C, making it suitable for various applications.
These features make it suitable for applications in consumer electronics, industrial systems, and embedded systems.

Package

The N25Q128A13ESF40E is a Serial NOR Flash Memory chip by Micron Technology. It is typically available in an 8-lead SOIC (Small Outline Integrated Circuit) package, which is compact and suitable for surface-mount applications.

Pinout

The N25Q128A13ESF40E is a 128 Mb (16 MB) serial NOR Flash memory device from Micron Technology, part of the N25Q series. It typically comes in an 8-pin SOIC (Small Outline Integrated Circuit) package, which is a standard layout for such devices. The key pins and their functions are as follows:
1. CS# (Chip Select): Enables the device when low.
2. SO/SIO1 (Serial Output/Serial I/O): Outputs data during read operations; also used for data I/O in quad operations.
3. WP# (Write Protect): Protects certain memory areas from being written if low.
4. VSS (Ground): Ground reference for the power supply.
5. SI/SIO0 (Serial Input/Serial I/O): Inputs commands, addresses, and data; also used for data I/O in quad operations.
6. SCK (Serial Clock): Provides the clock signal for data transfer.
7. HOLD# (Hold): Pauses serial communication if low.
8. VCC (Power Supply): Power supply input.
This device supports various protocols, including single, dual, and quad I/O SPI, allowing for flexible use in different applications needing reliable memory storage.

Manufacturer

The N25Q128A13ESF40E is manufactured by Micron Technology, Inc. Micron is an American company that specializes in semiconductor devices, primarily DRAM, flash memory, and solid-state drives. It is one of the leading companies in the memory and storage solutions industry, serving a variety of sectors including computing, mobile, automotive, and industrial markets.

Application

The N25Q128A13ESF40E is a serial NOR Flash memory chip used in various applications. Its primary application areas include embedded systems, consumer electronics, industrial automation, and communication devices. It is commonly used for firmware storage due to its reliability and speed. Additionally, it is suitable for applications requiring code shadowing, data logging, and boot code storage.

Equivalent

The N25Q128A13ESF40E is a 128Mb NOR Flash memory chip by Micron. Equivalent products include:
1. Winbond W25Q128FV - 128Mb Serial NOR Flash.
2. Spansion/Cypress S25FL128S - 128Mb Serial NOR Flash.
3. Macronix MX25L12835F - 128Mb Serial NOR Flash.
These alternatives offer similar storage capacities and interfaces, ensuring compatibility for most applications that use the N25Q128A13ESF40E. Always confirm specific requirements and pin compatibility in your application.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire