MX25L1006EZUI-10G

Les images sont à titre de référence seulement

MX25L1006EZUI-10G

IC FLASH 1MBIT SPI 104MHZ 8USON

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series MX25xxx05/06/08
Part Status Not For New Designs
Base Product Number MX25L1006
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 1Mbit
Memory Organization 128K x 8
Memory Interface SPI
Clock Frequency 104 MHz
Write Cycle Time - Word, Page 50µs, 3ms
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 8-UFDFN Exposed Pad
Supplier Device Package 8-USON (2x3)
Packaging Cut Tape (CT), Tape & Reel (TR)

Vue d'ensemble

Description

MX25L1006EZUI-10G is Macronix’s 1-Mbit SPI NOR flash memory in an 8-pin package (MX25L family). It provides nonvolatile storage for embedded firmware and data, used for boot code or code/data storage in microcontroller-based systems.
Key features (high level):
- Interface: Serial SPI with standard read/write/erase commands; some variants support faster dual/quad I/O reads.
- Capacity and organization: 1 Mbit total, typically organized as 128 K × 8.
- Memory operations: page programming, sector/block erases, and chip erase; low-power standby modes.
- Packaging/grade: the -10G suffix identifies the exact package, temperature range, and performance option for this device; exact specs vary by variant.
Typical electricals (per datasheet): voltage commonly ranges around 2.7–3.6 V; timing and maximum clock frequency depend on the specific revision. For exact timings, voltage, package pinout, and feature details, consult the Macronix MX25L1006EZUI-10G datasheet and packaging matrix.

Features

Here are the typical features of the MX25L1006EZUI-10G (Macronix):
- Density: 1 Mbit (128 KB) serial NOR flash
- Interface: SPI serial interface (standard SPI; fast read)
- Voltage: 2.7–3.6 V (industrial-grade variant)
- Speed: Up to ~104 MHz SPI clock for fast read
- Organization: 256-byte page size
- Erase/Program: 4 KB sectors; page-program capability
- Endurance/Retention: ~100k erase/program cycles; data retention ~20 years
- Security: hardware write protection with BP bits and WP#; status register with WIP bit
- Power modes: deep power-down and low active current modes
- Temperature: industrial range typically -40°C to +85°C
- Package: 8-pin package (e.g., SOIC/US8) suitable for low-pin-count designs
Note: exact timing, sector layout, and advanced I/O modes can vary by specific lot/variant; check the datasheet for precise specifications.

Package

8-pin USON package (3×3 mm, leadless).

Pinout

- Pin count: 8 pins
- Function: Macronix MX25L1006EZUI-10G is a serial SPI NOR flash memory (1 Mbit) used for storage. Typical pinout (8-pin package):
- CS# — Chip Select (active low)
- SO — Serial Data Out
- WP# — Write Protect (active low)
- GND — Ground
- SI — Serial Data In
- SCK — Serial Clock
- HOLD# — Hold (active low)
- VCC — Power Supply
Notes: WP#, HOLD# are active-low; VCC and GND provide power. It uses standard SPI modes for read/write operations.

Manufacturer

- Manufacturer: Macronix International Co., Ltd. (MXIC).
- What kind of company: A Taiwan-based semiconductor company that designs and manufactures non-volatile memory ICs (serial NOR/NAND flash, ROM, etc.) and operates as an integrated device manufacturer (own fabrication facilities).

Application

MX25L1006EZUI-10G is a 1‑Mbit SPI flash. Typical applications:
- Boot ROM and firmware storage for MCUs/SoCs
- Nonvolatile storage for firmware updates, configuration and calibration data
- Code/data storage in small consumer electronics (printers, set‑top boxes, routers)
- Industrial/automotive sensors and controllers needing reliable flash
- IoT devices, wearables and embedded instruments requiring compact, low‑voltage nonvolatile memory

Equivalent

Possible drop-in equivalents (1 Mbyte, 3V SPI NOR, similar JEDEC family):
- Winbond W25Q10BV / W25Q10BVSIG
- GigaDevice GD25Q10C
- Puya P25Q10U
- EtronTech EN25Q10
Note: verify package, voltage (2.7–3.6 V) and max read speed to ensure full compatibility.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire