MP2364DF-LF-Z

Les images sont à titre de référence seulement

MP2364DF-LF-Z

IC REG BUCK ADJ 1.5A DL 20TSSOPF

  • Fabricant
  • Mfr. Partie #MP2364DF-LF-Z
  • Paquet TSSOP-EP-20
  • Fiche de données
  • En stock7071

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR)
ProductStatus Active
Function Step-Down
OutputConfiguration Positive
Topology Buck
OutputType Adjustable
NumberofOutputs 2
Voltage-Input(Min) 4.75V
Voltage-Input(Max) 23V
Voltage-Output(Min/Fixed) 0.92V
Voltage-Output(Max) 16V
Current-Output 1.5A
Frequency-Switching 1.4MHz
SynchronousRectifier No
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 20-TSSOP (0.173, 4.40mm Width) Exposed Pad

Vue d'ensemble

Description

MP2364DF-LF-Z is Monolithic Power Systems’ synchronous buck DC-DC regulator. It combines the high-side and low-side MOSFETs and provides a low-voltage, adjustable output from a higher input voltage.
Key points:
- Wide input range and high efficiency: suitable for automotive and telecom power rails.
- Synchronous buck with current-mode PWM; no external Schottky diode required.
- Adjustable output via external resistor divider; programmable enable, soft-start, and protection features (OC/UVLO/thermal shutdown).
- Package: LF-Z indicates lead-free, RoHS-compliant, tape-and-reel/DFN-type packaging (industrial-ready).
- Applications: converting 9–36V (or similar) to 5V/3.3V/other rails for processors, FPGA, memory, and other DC-DC needs.
Design notes:
- External components: input/output capacitors, inductor, feedback divider, possible compensation network.
- Follow datasheet layout recommendations to ensure stability and performance.
For exact electrical specs, pinout, and application guidelines, consult the MP2364DF-LF-Z datasheet.

Features

Here are the main features of MP2364DF-LF-Z (concise):
- 4A step-down (buck) converter with integrated high-side switch
- Wide input range suitable for 4.5V to ~42V applications
- Adjustable output via external feedback network (ref ~0.8V)
- Fixed-frequency PWM control with good line/load regulation and soft-start
- Protection: overcurrent/short-circuit, over-temperature, undervoltage lockout, and output over-voltage protection
- Enable/shutdown control for power sequencing
- High efficiency and low quiescent current
- Compact RoHS-compliant 8-pin package (lead-free DFN/SOP variant)
Note: For exact electrical specifications (voltage ranges, efficiency, timing, and pinout), please refer to the official datasheet.

Package

The MP2364DF-LF-Z is supplied in a 10-pin DFN package (3.0 mm × 3.0 mm), lead‑free (LF), tape‑and‑reel (Z).

Pinout

The MP2364DF-LF-Z is supplied in an 8-pin DFN package with an exposed thermal/ground pad. It is a synchronous step‑down (buck) switching regulator. Typical pin functions (see datasheet for exact pin numbering) are:
- VIN: input supply
- SW: switch/node (connection to inductor)
- BST: bootstrap for high-side MOSFET gate drive
- EN (or ON/OFF): enable/shutdown control
- FB: feedback for output-voltage regulation
- GND/PGND and exposed pad: ground/thermal return
- One or more control/compensation pins (mode/soft‑start/COMP) for loop compensation and configuration
Refer to the MP2364 datasheet for the precise pin map and recommended PCB land pattern.

Manufacturer

The MP2364DF-LF-Z is manufactured by Monolithic Power Systems (MPS). MPS is a fabless semiconductor company headquartered in San Jose, California, that designs and supplies power-management integrated circuits and analog/mixed-signal solutions (switching regulators, PMICs, LED drivers, power modules) for consumer, computing, industrial, telecom and automotive markets.

Application

MP2364DF-LF-Z is a high-efficiency synchronous buck regulator. Typical applications:
- Automotive and industrial DC–DC power modules
- Consumer electronics and embedded systems (core rails for processors/SoCs and memory)
- Telecom and networking equipment
- Battery-powered handheld devices and portable accessories
- Power supplies for monitors/TVs and set-top boxes
- General on-board step-down regulators in wide-range input environments

Equivalent

Direct equivalents are other MP2364 family variants: MP2364 (base), MP2364DF, MP2364DF-LF, MP2364DN and MP2364DN-LF-Z (package/suffix variants). For third‑party “equivalents,” choose a 2A synchronous buck regulator with the same VIN range, switching frequency and pinout — verify pin‑to‑pin compatibility on datasheets before substituting.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire