MC33926AES

Les images sont à titre de référence seulement

MC33926AES

H-BRIDGE, BRUSHED DC MOTOR DRIVE

  • Fabricant
  • Mfr. Partie #MC33926AES
  • Paquet WFDFN-10
  • Fiche de données
  • En stock2691

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tray
ProductStatus Active
MotorType-Stepper Bipolar
MotorType-ACDC Brushed DC
Function Driver - Fully Integrated, Control and Power Stage
OutputConfiguration Half Bridge (2)
Interface Parallel
Technology CMOS
Applications Automotive, DC Motors
Current-Output 5A
Voltage-Supply 5V ~ 28V
Voltage-Load 5V ~ 28V
OperatingTemperature -40°C ~ 125°C (TA)
MountingType Surface Mount, Wettable Flank
Package/Case 10-WFDFN Exposed Pad

Vue d'ensemble

Description

MC33926AES is a dual high-current motor-driver IC from NXP (Freescale). It provides two independent H-bridges to drive DC motors from a 5–28 V supply. Each bridge is controlled by logic inputs (IN1/IN2 and IN3/IN4) or PWM for speed and direction, and it includes current-sense outputs for feedback. Protections include undervoltage lockout, overcurrent/short-circuit protection, and overtemperature shutdown, plus deadtime to prevent shoot-through. It’s suited for robotics, hobbyist motor controllers, and small automotive/industrial motors. The AES suffix indicates a specific package/variant; check the datasheet for exact pinout, per-channel current ratings, power dissipation, and thermal data.

Features

Here are the key features of the MC33926AES:
- Dual high-current half-bridge motor driver (two H-bridges) for DC motors.
- Wide operation: 5–28 V nominal motor supply (handles automotive transients).
- Integrated low Rds(on) MOSFETs for high efficiency.
- PWM-compatible inputs to control direction, braking, and speed for each bridge.
- Current monitoring and protection: overcurrent/short-circuit protection with current-limiting; IS pin for motor current feedback.
- Fault protection and diagnostics: UVLO, overtemperature, overcurrent, short-to-GND/short-to-Vcc protections; DIAG/diagnostic output (open-drain) for fault reporting.
- Brake and enable features: dedicated brake function and enable control per bridge.
- Automotive-grade/ AES variant with extended temperature range and robust protection suitable for automotive environments.
- Compact single-package solution reduces BOM and board space.

Package

MC33926AES comes in a 28-pin HTSSOP (Power-SSOP) package with an exposed pad; this is the automotive-grade variant.

Pinout

- Pin count: 28 pins (packages include 28‑pin SOIC/LQFP/DIP).
- Function: Dual high‑current H‑bridge motor driver with current sensing and protection.
- Provides two full bridges (four motor outputs): OUT1/OUT2 (Bridge A) and OUT3/OUT4 (Bridge B).
- Power: VBAT (motor supply) and GND.
- Control: IN1/IN2 for Bridge A, IN3/IN4 for Bridge B (plus enable/drive control as applicable).
- Sensing/limit: IS1/IS2 current-sense outputs with VREF to set current limit.
- Diagnostic: FAULT/DIAG status output.
- Protection: undervoltage, overcurrent, thermal shutdown.

In short: MC33926AES is a 28‑pin dual motor H‑bridge driver with built‑in protection, current sensing, and diagnostic feedback suitable for driving two DC motors from a single device.

Manufacturer

Manufacturer: NXP Semiconductors (the MC33926AES is the automotive version of the MC33926; originally from Freescale Semiconductor, now part of NXP).
What kind of company: NXP is a Dutch multinational semiconductor company that designs and manufactures integrated circuits and electronics for automotive, industrial, and consumer applications.

Application

- Voltage range: 5–28 V
- Automotive DC motor drives (power windows/seats/door locks/HVAC actuators)
- Robotics (DC motor driving for hobby/education robots)
- Industrial automation (actuators, conveyors, pumps, fans)
- General embedded/prototyping projects needing rugged high-current motor drive

Equivalent

Equivalent products (dual high-side/low-side brushed DC motor drivers) include:
- TI DRV8412
- TI DRV8833
- ST L6201/L6202/L6205
- ST L298N
- Allegro A4950/A4954
- Onsemi MC33887/MC33886
Note: choose by voltage/current rating, package, and protection features to match MC33926AES.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire