MAX3233EEWP

Les images sont à titre de référence seulement

MAX3233EEWP

IC TRANSCEIVER FULL 2/2 20SOIC

  • Fabricant
  • Mfr. Partie #MAX3233EEWP
  • Paquet
  • Fiche de données
  • En stock3522

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Obsolete
Type Transceiver
Protocol RS232
Number of Drivers/Receivers 2/2
Duplex Full
Receiver Hysteresis 500 mV
Data Rate 250kbps
Voltage - Supply 3V ~ 3.6V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295", 7.50mm Width)
Supplier Device Package 20-SOIC
Base Product Number MAX3233

Vue d'ensemble

Description

MAX3233EEWP is Maxim’s RS-232 transceiver kit (an evaluation board) built around the MAX3233 family. It provides two RS-232 drivers and two RS-232 receivers, so you can connect a microcontroller or UART to a PC/modem-style RS-232 port and vice versa. The device converts TTL/CMOS logic levels to RS-232 voltage levels and back, enabling serial communication over RS-232.
Operates from a single supply (roughly 3.0–5.5 V) and uses an on-chip charge pump to generate the required RS-232 voltages from that supply. External charge-pump capacitors are required per the datasheet. The EEWP suffix indicates an Evaluation Kit, so the board includes connectors and cables to test the transceivers and prototype RS-232 links easily.
Typical use cases: interface a microcontroller’s UART to a PC RS-232 port, developers’ debugging tools, or RS-232 links in embedded systems. It’s a compact, low‑power solution for converting TTL serial to RS-232 in a single-supply package.

Features

Here are the key features of the MAX3233EEWP (RS-232 transceiver) and its evaluation board:
- Dual RS-232 transceiver: 2 drivers and 2 receivers (TX/RX channels)
- Single-supply operation: 3.0 V to 5.5 V (typical 3.3 V)
- On-chip charge pump: generates RS-232 voltages from a single supply
- RS-232 level outputs: typically ±6 V swing
- TTL/CMOS inputs: logic-compatible with Vcc
- Data rate: up to about 250 kbps (RS-232 signaling)
- External pump capacitors: requires four 0.1 µF capacitors (C1–C4)
- ESD/robustness on RS-232 lines
- Small package (typical for MAX3233 family) and RoHS Pb-free
- Evaluation board features: DB9 RS-232 connector, voltage/power options, header pins for easy interfacing, plug-and-play for quick testing
Note: Exact temperature range and some electrical specs may vary by revision; check the datasheet for the precise variant you have.

Package

8-pin Small Outline package (SO-8), RoHS lead‑free.

Pinout

- Pin count: 20 pins (EEWP package)
- Function: Triple RS-232 transceiver. Provides three independent transmitter channels and three independent receiver channels (TTL/CMOS side: T1in, T2in, T3in and R1out, R2out, R3out; RS-232 side: T1out, T2out, T3out and R1in, R2in, R3in). Uses an onboard charge-pump with external capacitors (C1+, C1−, C2+, C2−) to generate ±RS-232 voltages from a single supply (Vcc, GND).

Manufacturer

Manufacturer: Maxim Integrated.
What kind of company: An American multinational semiconductor company that designs and manufactures analog and mixed-signal integrated circuits; Maxim was acquired by Analog Devices in 2021 and now operates as part of Analog Devices.

Application

RS-232 serial interface for 3.3V embedded systems. Applications include microcontrollers/SBCs, modems, printers, POS terminals, data-acquisition and measurement equipment, industrial control/automation gear, network/telecom equipment, and portable/battery-powered devices requiring a compact, low-power RS-232 transceiver.

Equivalent

Equivalent RS-232 transceivers (2 Tx/2 Rx with charge pump, 3–5.5 V) to MAX3233EEWP include:
- TI SP3232E/SP3232
- STMicroelectronics ST3232/ST3232E
- Analog Devices ADM232/ADM232A
These provide similar functionality; verify pinout/package and voltage range in datasheets. Also, MAX3232/ MAX3233 variants from Maxim are direct relatives.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire