M27C256B-10F1

Les images sont à titre de référence seulement

M27C256B-10F1

IC EPROM 256KBIT PARALLEL 28CDIP

  • Fabricant
  • Mfr. Partie #M27C256B-10F1
  • Paquet FDIP-28W
  • Fiche de données
  • En stock5150

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tube
ProductStatus Obsolete
MemoryType Non-Volatile
MemoryFormat EPROM
Technology EPROM - UV
MemorySize 256Kb (32K x 8)
MemoryInterface Parallel
AccessTime 100 ns
Voltage-Supply 4.5V ~ 5.5V
OperatingTemperature 0°C ~ 70°C (TA)
MountingType Through Hole
Package/Case 28-CDIP (0.600, 15.24mm) Window

Vue d'ensemble

Description

The M27C256B-10F1 is a 256 Kbit (32KB) EPROM (Erasable Programmable Read-Only Memory) chip manufactured by STMicroelectronics. It is designed for applications requiring non-volatile memory storage, such as firmware and microcontroller programming. The "10" in its designation indicates a maximum access time of 100 nanoseconds, making it suitable for high-speed applications.
This EPROM features an 8-bit data bus, allowing it to read and write data in bytes. It operates with a supply voltage of 5V, with an additional 12.5V for programming. The chip can be erased using UV light, exposing the window on the top of the package, and can be programmed about 1,000 times.
The M27C256B-10F1 is commonly used in embedded systems, consumer electronics, and various industrial applications, where the need for reliable and reusable memory is essential. Its durability and capacity make it a popular choice among designers looking for efficient memory solutions.

Features

The M27C256B-10F1 is a 256 Kbit (32 K x 8) UV erasable programmable read-only memory (EPROM) chip. Key features include:
1. Memory Organization: 32 K x 8 bits.
2. Access Time: 100 ns, allowing for fast data retrieval.
3. Supply Voltage: Operates at a 5V ±10% supply voltage.
4. Programming Method: UV light for erasure and electrical programming.
5. Endurance: Typically up to 100,000 write/erase cycles.
6. Retention: Data retention for up to 20 years.
7. Pin Configuration: Standard 28-pin DIP package.
8. Low Power Consumption: Consumes low power during operation, enhancing reliability.
9. Integrated Control Logic: Simplifies interfacing with microcontrollers.
This EPROM is suitable for applications requiring reprogrammable storage such as firmware, boot code, and data storage in embedded systems.

Package

The M27C256B-10F1 is a 32-pin Dual In-line Package (DIP).

Pinout

The M27C256B-10F1 is a 32K x 8-bit (256 Kbit) UVEPROM (Ultra Violet Erasable Programmable Read-Only Memory) device. It has a total of 28 pins.
Pin Functions:
1. A0 - A15: Address inputs (A0-A7 for low byte, A8-A15 for high byte).
2. D0 - D7: Data outputs (8-bit data bus).
3. Vpp: Programming voltage input (typically 12.5V).
4. Vcc: Supply voltage (typically 5V).
5. GND: Ground connection.
6. OE: Output Enable (active low, controls data output).
7. CE: Chip Enable (active low, enables the device).
8. WE: Write Enable (active low, controls write operations).
This device is commonly used in applications requiring non-volatile memory storage, such as firmware storage in embedded systems.

Manufacturer

The M27C256B-10F1 is manufactured by STMicroelectronics, a global semiconductor company. STMicroelectronics is known for designing and producing a wide range of semiconductor solutions, including microcontrollers, memory devices, analog ICs, and power management chips. The company serves various markets, such as automotive, industrial, consumer electronics, and communication, focusing on innovation and high-performance solutions. Formed through a merger between SGS Microelettronica and Thomson Semiconducteurs in 1987, STMicroelectronics has a strong presence in Europe, Asia, and the Americas, contributing significantly to the development of advanced technologies in the electronics sector.

Application

The M27C256B-10F1 is a 256Kb (32KB) EPROM used in various applications such as consumer electronics, automotive systems, industrial control, and telecommunications. It is commonly employed for firmware storage, boot code, and data retention in situations requiring non-volatility. Its features make it suitable for programmable logic devices, microcontrollers, and other embedded systems where data integrity and reprogrammability are essential.

Equivalent

The M27C256B-10F1 is a 256 Kbit EPROM chip. Equivalent products include:
1. 27C256 - Standard version.
2. 28C256 - Flash memory equivalent.
3. AM27C256 - AMD version.
4. W27C256 - Winbond version.
5. MBM27C256 - Mitsubishi version.
Ensure compatibility with pinout, voltage, and timing specifications when substituting.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire