M27C2001-10F1

Les images sont à titre de référence seulement

M27C2001-10F1

IC EPROM 2MBIT PARALLEL 32CDIP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Obsolete
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format EPROM
Technology EPROM - UV
Memory Size 2Mbit
Memory Organization 256K x 8
Memory Interface Parallel
Voltage - Supply 4.5V ~ 5.5V
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Through Hole
Package / Case 32-CDIP (0.600", 15.24mm) Window
Supplier Device Package 32-CDIP Frit Seal with Window
Base Product Number M27C2001
Access Time 100 ns

Vue d'ensemble

Description

The M27C2001-10F1 is a high-performance CMOS EPROM (Erasable Programmable Read-Only Memory) chip with a storage capacity of 2 megabits (256 kilobytes). It operates on a single +5V power supply and features a fast access time of 10 microseconds, making it suitable for various applications in embedded systems, data storage, and firmware programming.
This device allows for both byte-wise and word-wise programming, with the ability to erase the entire chip through exposure to UV light. The M27C2001-10F1 is commonly used in applications requiring non-volatile memory, such as microcontrollers and digital signal processors.
Additionally, the chip has a dual-in-line package (DIP) form factor, making it easy to integrate into circuit boards. Its low power consumption and reliability contribute to its popularity in consumer electronics and industrial applications. Overall, the M27C2001-10F1 is a versatile choice for designers needing efficient and reprogrammable memory solutions.

Features

The M27C2001-10F1 is a 2 Megabit (256K x 8) UVEPROM (Ultraviolet Erasable Programmable Read-Only Memory) manufactured by STMicroelectronics. Key features include:
1. Memory Organization: 256K x 8 bits, allowing for storage of 2 megabits of data.
2. Access Time: 10 ns, enabling fast read operations.
3. Programming Method: UVEPROM technology allows erasure using UV light and reprogramming.
4. Data Retention: Retains data for over 20 years when properly stored.
5. Operating Voltage: Typically operates at +5V, with a programming voltage of around +12.75V.
6. Package Type: Available in 32-pin DIP (Dual In-line Package) form factor.
7. Multiple Programming Options: Supports various programming modes for flexibility.
8. High Reliability: Suitable for automotive, industrial, and consumer applications due to robust design.
This chip is commonly used in applications requiring non-volatile memory storage, such as firmware, configuration settings, and embedded systems.

Package

The M27C2001-10F1 is typically packaged in a 32-pin dual in-line package (DIP). This type of package is designed for easy insertion into a PCB and features a standard pin configuration.

Pinout

The M27C2001-10F1 is a 2 Megabit (256K x 8-bit) UV EPROMS (Erasable Programmable Read-Only Memory) device. It features a 32-pin Dual In-Line Package (DIP) configuration.
The pinout and functions are as follows:
1. A0 - A17: Address lines (A0 to A17) for accessing memory locations.
2. Q0 - Q7: Data output lines (Q0 to Q7) for reading data.
3. Vpp: Programming voltage supply pin.
4. Vcc: Power supply pin (typically +5V).
5. GND: Ground pin.
6. OE: Output Enable pin; activates the output buffers.
7. CE: Chip Enable pin; activates the memory device for read/write operations.
8. WE: Write Enable pin; used for programming the device.
The M27C2001-10F1 is used in applications requiring non-volatile memory storage, allowing data retention even when power is removed.

Manufacturer

The M27C2001-10F1 is manufactured by STMicroelectronics, a leading global semiconductor company. STMicroelectronics specializes in the design, development, and manufacturing of a wide range of semiconductor products, including microcontrollers, sensors, and memory devices. The company serves various industries such as automotive, industrial, telecommunications, and consumer electronics. STMicroelectronics is known for its innovation in microelectronics and its commitment to advancing technologies like IoT, automotive solutions, and power management.

Application

The M27C2001-10F1 is a 2 Megabit (256K x 8) UV EPROM primarily used in applications such as microcontrollers, programmable logic devices, embedded systems, and firmware storage. It is suitable for data retention, code storage, and configurations in consumer electronics, automotive electronics, and telecommunications equipment, where reprogramming and non-volatile storage are essential.

Equivalent

The M27C2001-10F1 is a 2Mb (256K x 8) UV EPROM. Equivalent products include the AM27C2001, AT27C2001, and 27C2001. These alternatives may vary in programming voltage or technology, so ensure compatibility with your specific application.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire