LTM8032MPV#PBF

Les images sont à titre de référence seulement

LTM8032MPV#PBF

DC DC CONVERTER 0.8-10V

  • Fabricant
  • Mfr. Partie #LTM8032MPV#PBF
  • Paquet
  • Fiche de données
  • En stock18444

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series µModule®
Part Status Active
Base Product Number LTM8032
Type Non-Isolated PoL Module
Number of Outputs 1
Voltage - Input (Min) 3.6V
Voltage - Input (Max) 36V
Voltage - Output 1 0.8 ~ 10V
Current - Output (Max) 2A
Applications ITE (Commercial)
Operating Temperature -55°C ~ 125°C
Mounting Type Surface Mount
Package 71-BLGA Module
Size / Dimension 0.59" L x 0.35" W x 0.11" H (15.0mm x 9.0mm x 2.8mm)
Supplier Device Package 71-LGA (15x9)
Packaging Tray

Vue d'ensemble

Description

The LTM8032MPV#PBF is a Linear Technology/Analog Devices µModule buck regulator. It combines a switching regulator, power MOSFETs, inductor, and required passives in a single compact module for easy power conversion.
Key points:
- Highly integrated, wide input range, and adjustable output via a feedback network.
- High efficiency with fast transient response; includes protections such as enable/soft-start, overcurrent/short-circuit, and thermal protection.
- MPV is the package type; #PBF denotes Pb-free, RoHS-compliant packaging.
- Typical uses: industrial, telecom, automotive, and portable electronics needing a compact, efficient DC-DC converter.
How to use:
- Connect Vin and GND, enable as required, and set Vout with external resistor divider per the datasheet.
- Follow the datasheet for recommended input/output capacitors and layout.
For precise electrical specs, pinout, and application circuits, consult the LTM8032MPV#PBF datasheet and product page.

Features

Key features of LTM8032MPV#PBF:
- Fully integrated µModule buck regulator (inductor, MOSFETs, controller) for compact power rails
- Wide input range: 4V to 60V (transient-tolerant, suitable for automotive environments)
- Output: adjustable 0.8V to 5V via external feedback resistors (options may include fixed versions)
- Output current: up to about 2A continuous (dependent on thermals)
- High efficiency across loads (typical > 85–90%)
- Fixed-frequency, current-mode PWM with recommended soft-start
- Protection: overcurrent/short-circuit, overtemperature shutdown, undervoltage lockout
- Enable input with proper logic control and optional output discharge on disable
- Optional remote sense and accurate regulation at the load
- Package: MPV Pb-free (PBF); compact LGA/multi-pin module suitable for space-constrained designs
- RoHS compliant; suitable for industrial and automotive applications
Note: exact output voltages, current rating, and switching frequency are specified in the datasheet for the specific LTM8032MPV variant.

Package

The LTM8032MPV#PBF is supplied in Analog Devices' MPV µModule surface-mount package (multi‑pin µModule, RoHS Pb‑free).

Pinout

- Pin count: 20 pins (MPV package).
- Function: A fully integrated µModule switching regulator (step-down) with an internal inductor. It accepts Vin and delivers a regulated Vout, controlled by EN/SHDN and FB, with soft-start and protection/status pins (power good, fault/overcurrent, etc.). PBF just indicates RoHS lead-free packaging.

Manufacturer

Manufacturer: Analog Devices, Inc. (the LTM8032 was originally a Linear Technology product — LTM prefix).
Company type: A multinational semiconductor company that designs and supplies analog and mixed-signal integrated circuits and power-management modules (including μModule regulators), sensors, and related components.

Application

Applications of LTM8032MPV#PBF (isolated DC-DC µModule regulator):
- Isolated power supplies and auxiliary rails in compact systems
- Telecom and datacom equipment
- Industrial automation and motor drives
- Automotive and avionics instrumentation with isolation
- Medical devices requiring patient isolation
- Sensors, data acquisition, and distributed power architectures
- Battery-powered portable systems needing high efficiency and low EMI

Equivalent

Equivalents depend on the LTM8032’s function (it's a µModule buck regulator). Please share the device’s specs: VIN range, VOUT, IOUT, switching frequency, and package. With that, I’ll provide precise cross‑references from TI, ADI, MPS, etc.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire