LTM4623EY#PBF

Les images sont à titre de référence seulement

LTM4623EY#PBF

DC DC CONVERTER 0.6-5.5V

  • Fabricant
  • Mfr. Partie #LTM4623EY#PBF
  • Paquet
  • Fiche de données
  • En stock19600

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series µModule®
Part Status Active
Base Product Number LTM4623
Type Non-Isolated PoL Module
Number of Outputs 1
Voltage - Input (Min) 4V
Voltage - Input (Max) 20V
Voltage - Output 1 0.6 ~ 5.5V
Current - Output (Max) 3A
Applications ITE (Commercial)
Features OCP, OTP, OVP, UVLO
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package 25-PowerBBGA Module
Size / Dimension 0.25" L x 0.25" W x 0.07" H (6.3mm x 6.3mm x 1.8mm)
Supplier Device Package 25-BGA (6.25x6.25)
Packaging Tray

Vue d'ensemble

Description

LTM4623EY#PBF is a 3-phase, high-current, synchronous buck regulator in Analog Devices’ µModule family. It integrates the control logic, three power MOSFETs, gate drivers, and protection features to create a single high-current low-voltage rail from a higher input supply, using a three-phase interleaved topology for efficiency and fast transient response. It supports digital control/monitoring via a PMBus/I2C-compatible interface, enabling programmable output voltage, sequencing, current limit, and fault reporting. External components are minimal but typically include three output inductors (one per phase), input/output capacitors, and a few passives for PMBus lines. The EY suffix denotes a specific package variant, while #PBF indicates a RoHS-compliant, lead-free version. Common applications include CPU/GPU/FPGA power rails, data-center and telecom power supplies, and other high-performance embedded systems requiring compact, configurable, and efficient DC-DC power.

Features

LTM4623EY#PBF features (concise):
- Three independently programmable output rails in a single µModule regulator
- PMBus digital interface for voltage programming, margining, sequencing and telemetry
- Multiphase architecture for high current capability and fast transient response
- Adjustable output voltages per channel; remote sense and voltage tracking
- Output voltage margining, sequencing, and load-sharing/droop control
- Fault protection: overcurrent/short-circuit, overvoltage, and thermal shutdown with latches
- Soft-start, fault reporting, and telemetry (Vout, Iout, Temp)
- Wide input voltage range and high efficiency
- RoHS Pb-free (PBF) package in a compact footprint
- Operating temperature range suitable for demanding applications (e.g., -40°C to 125°C)
Note: For exact voltage ranges, current limits, efficiency, and package pinout, refer to the official datasheet.

Package

Package: μModule (LGA-style) package. It’s a sealed module with bottom contact pads (no external leads). The #PBF suffix means Pb-free.

Pinout

LTM4623EY#PBF is supplied in a 36‑ball BGA package (36 pins/balls). Major pin functions (grouped):
- VIN: main input power pins
- VOUT1, VOUT2: regulated output pins for the two channels
- GND: return/thermal pad(s)
- SW/SWx (power switch nodes): internal switch outputs/force pins for each channel
- RUN/EN (RUN1/RUN2): channel enable pins
- TRACK/SS: soft‑start/track input
- FB1/FB2: feedback pins for each output
- ISET/RT (or similar): current/loop/clock setting
- INTVCC: internal bias/regulator output (logic supply)
- PGOOD/PG: power‑good/status indicator
- MODE: mode selection (pulse‑skipping/forced PWM)
- Additional pins: sense/comp/ground/thermal interconnects for stability and current sensing
For a complete pin‑by‑pin map and exact names/locations, refer to the LTM4623 datasheet.

Manufacturer

Manufacturer: Analog Devices, Inc. (originally produced by Linear Technology — part number LTM4623EY#PBF).
What kind of company: Analog Devices is a multinational semiconductor company that designs and manufactures analog, mixed-signal and power-management integrated circuits and µModule power-regulator products (high-performance analog and power solutions).

Application

LTM4623EY#PBF is a 3-output µModule DC-DC regulator. Common application areas include:
- Point-of-load power for CPU/GPU/FPGA/ASIC cores and memory rails
- Multi-rail VRMs in servers, workstations, and data centers
- Motherboards and embedded SBCs
- Telecom, networking, and industrial equipment needing tight regulation and fast transient response

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire