LTM2881CV-3#PBF

Les images sont à titre de référence seulement

LTM2881CV-3#PBF

DG ISO 2.5KV 2CH RS422 32-BLGA

  • Fabricant
  • Mfr. Partie #LTM2881CV-3#PBF
  • Paquet
  • Fiche de données
  • En stock14824

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series µModule®
Part Status Active
Base Product Number LTM2881
Technology Magnetic Coupling
Type RS422, RS485
Isolated Power Yes
Number of Channels 2
Inputs - Side 1/Side 2 1/1
Channel Type Unidirectional
Voltage - Isolation 2500Vrms
Common Mode Transient Immunity (Min) 30kV/µs
Data Rate 20Mbps
Voltage - Supply 3V ~ 3.6V
Operating Temperature 0°C ~ 70°C
Mounting Type Surface Mount
Package 32-BLGA
Supplier Device Package 32-LGA (15x11.25)
Packaging Tray

Vue d'ensemble

Description

Introduction to LTM2881CV-3#PBF
- LTM2881CV-3#PBF is a Linear Technology (now Analog Devices) LTM family μModule device. It provides isolated power and a compact, integrated interface to control that isolated supply in a single module.
- The “CV-3” portion denotes a specific variant/voltage/package option within the LTM2881 family; “#PBF” indicates Pb-free, lead-free packaging (typically tape-and-reel).
- Applications: used to power and communicate with remote subsystems in industrial, telecom, medical, or instrumentation equipment while maintaining galvanic isolation.
- Benefits: small size, integrated regulation and isolation, simplified board-level design, and compatibility with system isolation requirements.
- Important: for exact electrical specs (input/output ranges, isolation voltage, communication protocol, thermal limits), consult the official LTM2881 datasheet and product page.

Features

Here are the typical features of the LTM2881CV-3#PBF (Pb-free) μModule isolated DC-DC converter:
- Galvanic isolation between input and output
- Integrated high-efficiency switch-mode regulator in a compact μModule package
- Wide input voltage range (typical for LTM µModule family)
- Fixed 3.3 V output version (indicated by the “-3” suffix)
- High power density and small footprint
- Tight output regulation with protection features
- Overcurrent/short-circuit protection
- Overvoltage protection and undervoltage lockout
- Thermal shutdown protection
- Pb-free (PBF) packaging; RoHS compliant
- Industrial operating temperature range (typical)
Note: For exact electrical specs (Vin range, efficiency, current capability, regulation tolerance, etc.), please consult the current datasheet.

Package

Package type: Pb-free LGA (land grid array) package.

Pinout

Pin count: 20 pins.
Function: LTM2881CV-3#PBF is a 20‑pin μModule isolated DC‑DC converter. It provides galvanic isolation between input and output and includes the regulator, transformer, and control circuitry. Pins cover input side (VIN/GND), isolated output (VOUT/GND, VISO), feedback, enable/shutdown, and status/diagnostic signals. For exact pinout and per‑pin functions, refer to the LTM2881 data sheet and package CV-3/PBF variant details.

Manufacturer

Analog Devices, Inc. (ADI). ADI is a multinational semiconductor company that designs and manufactures analog, mixed-signal, RF, and digital signal processing integrated circuits, including μModule regulators under the LTM brand.

Application

Application areas of LTM2881CV-3#PBF:
- Galvanic isolation between host and remote/high-voltage domains
- Isolated power supplies for MCUs/FPGA, sensors, and data converters
- Isolated digital interfaces (I/O, serial links) in industrial automation
- Automotive, medical, and telecom equipment needing safety isolation and EMI control
- Distributed control systems and power architectures with isolation requirements

Equivalent

LTM2881CV-3#PBF is a µModule isolated SPI interface. Direct cross‑reference depends on your specs (voltage rails, isolation voltage, speed, package). Functionally similar parts include:
- Analog Devices: ADuM1250/1251/1252/1253 isoSPI isolators
- TI: isoSPI/digital isolator families
- Silicon Labs: Si86x isolators
- Renesas: iso-series isolators
Note: exact pinout, voltage, and isolation ratings vary—provide your isolation, voltage, and speed requirements for a precise cross reference.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire