Les images sont à titre de référence seulement
LTC4211IS8
IC CTRLR HOTSWAP CURR CTRL 8SOIC
- Fabricant
- Mfr. Partie #LTC4211IS8
- Paquet
- Fiche de données
- En stock8248
100% original & Nouveau
24 heures prêtes à expédier
Garantie 365 jours
RFQ et Obtenez plus de rabais
Spécifications
| Part Status | Obsolete |
| Base Product Number | LTC4211 |
| Type | Hot Swap Controller |
| Number of Channels | 1 |
| Internal Switch(s) | No |
| Applications | General Purpose |
| Features | Latched Fault |
| Programmable Features | Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO |
| Voltage - Supply | 2.5V ~ 16.5V |
| Operating Temperature | -40°C ~ 85°C |
| Current - Supply | 1 mA |
| Mounting Type | Surface Mount |
| Package | 8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 8-SO |
| Packaging | Tube |
Vue d'ensemble
Description
Key points:
- High‑side controller with adjustable current limit (set by a sense resistor) to protect against short circuits and inrush.
- Soft‑start to limit surge when a supply is connected.
- Protection features: reverse‑polarity protection, overvoltage/undervoltage detection, and a fault latch with a status/output indication.
- External MOSFET drive: the controller gates a pass device to regulate current and protect the system.
- Fault signaling and latch reset on power cycle or fault clearance.
IS8 suffix:
- Indicates the package option: 8‑pin MSOP/SSOP (S8) style.
Typical uses:
- Hot‑swap and insertion protection for backplanes, servers, telecom power, and other live power rails; any design needing controlled inrush and fault protection on a live supply.
Features
- Hot-swap controller for safe board insertion with external MOSFET drive
- Programmable current limit via sense resistor (Ilimit)
- Soft-start to limit inrush current
- Overcurrent protection with fast current limit and fault latch
- UVLO/OV protection to guard against undervoltage and overvoltage
- Thermal shutdown with latch protection
- Reverse-current protection to prevent backfeeding
- Output discharge path on fault or shutdown
- Fault/status reporting through open-drain pins (fault/power-good)
- Enable input for manual on/off control
- Small 8-pin IS8 package
(These summarize core capabilities; refer to the datasheet for exact electrical specs and pin details.)
Package
Pinout
- Function: Hot-swap/current-limit controller for a power rail. It drives an external N-channel MOSFET to limit inrush and provide protection against overcurrent/short-circuit on the supply.
Manufacturer
Application
Expédition
Méthodes d'expéditionNous
offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.
Référence des frais d'expédition (DHL/FedEx):
DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.
FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.
UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.
TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.
EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.
Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.
Paiements
Payment Methods
Le terme de paiement est 100% prépayé.
Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:
1. PayPal
2. Carte de crédit/débit
3. Transfert bancaire
Similaire
-
MX25L3233FZBI-08Q
Macronix
-
MX25V1635FZNQ03
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V16066M2I02
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25U3232FZBI02
Macronix
-
MX25U6435FM2I-10G
Macronix
-
MX25L12835FZ2I-10..
Macronix
-
MX29LV160DTTI-70G
Macronix
-
MX25L25645GXDI-08..
Macronix