LTC3630AIDHC#TRPBF

Les images sont à titre de référence seulement

LTC3630AIDHC#TRPBF

IC REG BUCK ADJ/PROG 500MA 16DFN

  • Fabricant
  • Mfr. Partie #LTC3630AIDHC#TRPBF
  • Paquet DFN-16
  • Fiche de données
  • En stock6178

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR)
ProductStatus Active
Function Step-Down
OutputConfiguration Positive or Negative
Topology Buck
OutputType Adjustable (Programmable)
NumberofOutputs 1
Voltage-Input(Min) 4V
Voltage-Input(Max) 76V
Voltage-Output(Min/Fixed) 0.8V (1.8V, 3.3V, 5V)
Voltage-Output(Max) 76V
Current-Output 500mA
SynchronousRectifier Yes
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case 16-WFDFN Exposed Pad

Vue d'ensemble

Description

The LTC3630AIDHC#TRPBF is Linear Technology/Analog Devices’ high‑voltage, synchronous buck DC‑DC regulator with integrated MOSFETs. It provides efficient step‑down conversion from a wide input range (up to about 60V) to a lower output voltage set by an external feedback network. The device uses fixed‑frequency, current‑mode PWM, includes soft‑start, an enable/shutdown pin, and protections such as overcurrent, thermal shutdown, and undervoltage lockout. It requires an external inductor, input/output capacitors, and a feedback divider to complete the regulator. The AIDHC suffix denotes the specific 8‑pin package, while #TRPBF indicates Tape‑and‑Reel Pb‑free packaging. Typical applications include automotive and industrial power supplies, battery-powered systems, and other environments requiring robust, high‑voltage DC conversion. For exact electrical specs, pinout, and implementation details, refer to the LTC3630A datasheet.

Features

Key features of LTC3630AIDHC#TRPBF (compact 3A step-down regulator in TRPBF package):
- 3A switch current with integrated high-side/low-side MOSFETs (synchronous buck)
- Adjustable output via external feedback network
- Current-mode control for fast transient response
- Fixed-frequency PWM operation (with possible PWM/PFM modes)
- Soft-start to limit inrush and prevent output surge
- Enable input and power-good/status signaling
- Robust protection: overcurrent/short-circuit, overvoltage, undervoltage lockout, and thermal shutdown
- High efficiency from synchronous rectification
- Suitable for ceramic-capacitor outputs; compact TRPBF packaging
Note: Exact voltage ranges, optional modes, and packaging details are in the official datasheet.

Package

LTC3630AIDHC#TRPBF is supplied in a 12‑lead DFN package (DHC). It is RoHS/Pb‑free and shipped tape‑and‑reel (TRPBF). The "I" denotes industrial temperature grade.

Pinout

Pin count: 10 pins.
Function: LTC3630AIDHC is a synchronous step‑down (buck) switching regulator IC in Linear/Analog Devices' 10‑lead DHC (3 mm × 3 mm DFN) package. It integrates the power MOSFETs and control circuitry to convert a higher input voltage to an adjustable lower output voltage with high efficiency. Suffix #TRPBF denotes tape‑and‑reel packaging and Pb‑free (RoHS) finish.

Manufacturer

The LTC3630AIDHC#TRPBF is manufactured by Analog Devices (originally Linear Technology — the LTC brand). Analog Devices is a semiconductor company that designs and manufactures analog, mixed-signal, and power-management integrated circuits, specializing in products such as voltage regulators, data converters, amplifiers, and other ICs for industrial, communications, and consumer applications.

Application

Applications: High-current VRMs and point-of-load regulators using a multi-phase buck topology. Suitable for delivering CPU/GPU/FPGA/ASIC rails; power modules in servers, data centers, and AI accelerators; telecom/network equipment; graphics cards and other high-performance compute boards; industrial control systems and high-reliability power supplies.

Equivalent

Direct equivalents are the same device with different ordering suffixes: LTC3630AIDHC (base), LTC3630AIDHC#TRPBF (tape & reel, RoHS), LTC3630AIDHC#PBF (Pb‑free). These are the drop‑in/ordering variants of the LTC3630A family; there is no guaranteed cross‑manufacturer drop‑in — contact Analog Devices for recommended substitutes.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire