LTC2862IS8-1#TRPBF

Les images sont à titre de référence seulement

LTC2862IS8-1#TRPBF

IC TRANSCEIVER HALF 1/1 8SO

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Analog Devices Inc.
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Type Transceiver
Protocol RS422, RS485
NumberofDrivers/Receivers 1/1
Duplex Half
ReceiverHysteresis 150 mV
DataRate 20Mbps
Voltage-Supply 3V ~ 5.5V
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Vue d'ensemble

Description

The LTC2862IS8-1#TRPBF is a high-speed RS-485/RS-422 transceiver from Analog Devices, designed for robust communication in industrial and automotive applications. It supports data rates up to 20 Mbps and features a wide voltage range of 3.0V to 5.5V, making it versatile for various power supply configurations.
Key features include low power consumption, thermal shutdown protection, and the ability to operate in half-duplex or full-duplex modes. Its integrated fail-safe features ensure reliable operation in noisy environments by providing a known state when the bus is idle. The device is packaged in an 8-lead MSOP for compact designs, and its robust ESD protection enhances reliability in harsh conditions.
Overall, the LTC2862 is ideal for applications requiring high-speed data transmission over long distances, including factory automation, remote sensing, and telemetry systems.

Features

The LTC2862IS8-1#TRPBF is a high-performance RS-485/RS-422 transceiver designed for robust data communication. Key features include:
1. Data Rate: Supports data rates up to 20 Mbps.
2. Operating Voltage: Wide supply voltage range of 3V to 5.5V.
3. Low Power Consumption: Draws minimal current, making it suitable for battery-operated devices.
4. Temperature Range: Operates over an extended temperature range from -40°C to +85°C.
5. Fail-Safe Features: Integrated fail-safe circuitry ensures reliable operation in the event of a bus fault.
6. Common Mode Voltage Range: Supports a large common mode voltage range, enhancing noise immunity.
7. Single Chip Solution: Combines both driver and receiver functionalities, simplifying design.
8. ESD Protection: Enhanced protection against electrostatic discharge (ESD) events.
9. Short-Circuit Protection: Built-in short-circuit protection for increased reliability.
These features make the LTC2862 ideal for industrial automation, communication networks, and various data transmission applications.

Package

The LTC2862IS8-1#TRPBF is packaged in an 8-lead MSOP (Mini Small Outline Package) with a Thin profile.

Pinout

The LTC2862IS8-1#TRPBF is an RS-485/RS-422 transceiver with an 8-pin package. The pin count is 8.
Here’s a brief overview of the pin functions:
1. A (Pin 1): Non-inverted differential output.
2. B (Pin 2): Inverted differential output.
3. Y (Pin 3): Non-inverted receiver output.
4. Z (Pin 4): Inverted receiver output.
5. GND (Pin 5): Ground reference.
6. VCC (Pin 6): Positive supply voltage.
7. RE (Pin 7): Receiver enable (active low).
8. DE (Pin 8): Driver enable (active high).
The LTC2862 supports high-speed data transmission and features fail-safe operation for robust communication in noisy environments.

Manufacturer

The manufacturer of the LTC2862IS8-1#TRPBF is Analog Devices, Inc. (ADI). Analog Devices is a multinational company that specializes in the design and manufacturing of high-performance analog, mixed-signal, and digital signal processing (DSP) integrated circuits. Founded in 1965, ADI serves a wide range of industries including automotive, communications, healthcare, and industrial automation. The company is known for its innovative technologies that enable data conversion, signal processing, and power management solutions. Its products are essential in various applications, including consumer electronics, medical devices, and industrial control systems.

Application

The LTC2862IS8-1#TRPBF is a dual RS-485/RS-422 transceiver designed for high-speed communication in industrial applications. Its key application areas include industrial automation, remote monitoring, building automation, and automotive communication. It is suitable for long-distance data transmission, enabling robust communication in noisy environments, making it ideal for systems requiring reliable, high-speed data links.

Equivalent

The LTC2862IS8-1#TRPBF is a low-power RS-485/RS-422 transceiver. Equivalent products include the SN65HVD3082E, MAX1487, and ADM2483. These chips offer similar functionality for serial communication in differential signaling applications. Ensure to verify specific parameters such as voltage levels, data rates, and package types for compatibility.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire