LTC2641IMS8-16#PBF

Les images sont à titre de référence seulement

LTC2641IMS8-16#PBF

IC DAC 16BIT V-OUT 8MSOP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Analog Devices Inc.
Package Tube
ProductStatus Active
NumberofBits 16
NumberofD/AConverters 1
SettlingTime 1µs (Typ)
OutputType Voltage - Unbuffered
DifferentialOutput No
DataInterface SPI
ReferenceType External
Voltage-SupplyAnalog 2.7V ~ 5.5V
Voltage-SupplyDigital 2.7V ~ 5.5V
INL/DNL(LSB) ±0.5, ±0.5
Architecture R-2R
OperatingTemperature -40°C ~ 85°C
Package/Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
SupplierDevicePackage 8-MSOP

Vue d'ensemble

Description

Introduction to LTC2641IMS8-16#PBF
- What it is: A 16‑bit precision multiplying DAC (MDAC) from Linear Technology (now Analog Devices) with a serial interface (SPI‑like) for digital control.
- Package and marking: IMS8 indicates an 8‑lead MSOP package; #PBF denotes Pb‑free, RoHS compliant.
- Core idea: The DAC converts a digital code into an output voltage proportional to an external reference (Vout ≈ (Code/65535) × Vref).
- Key features: 16‑bit resolution, low glitches and noise, fast settling, single‑supply operation, and buffered voltage output.
- Typical use: Precision programmable gain/offset, calibration, waveform generation, and other closed‑loop control applications.
- How to use (high level): Connect Vref, drive the SDI/SCLK/CS lines to load a code, and read Vout on the buffered output. Refer to the datasheet for exact timing and pinout.
- Where to learn more: LTC2641 data sheet and product page on Analog Devices’ site.
Note: The IMS8-16#PBF suffix specifies the package and Pb‑free RoHS compliance.

Features

Here are the key features of LTC2641IMS8-16#PBF (Pb-Free MSOP-8, 16‑bit DAC):
- 16-bit voltage-output DAC with SPI-compatible serial input
- 3/4‑wire serial interface (DIN, SCLK, CS) with optional LDAC for simultaneous update
- Buffered, rail-to-rail output tied to external reference; full-scale equals VREF
- External reference input with optional internal reference behavior
- Monotonic performance over the full operating temperature range
- Low glitch impulse and fast settling for precision updates
- Low power operation with power-down mode
- Wide supply range: typically 2.7V to 5.5V
- Temperature range: -40°C to 85°C (industrial)
- Package: 8‑lead MSOP (IMS8), Pb-free
- Suitable for calibration, instrumentation, and closed-loop control applications
Note: For exact electrical specs (INL/DNL, settling times, current consumption, reference options), please consult the latest datasheet.

Package

An 8-pin MSOP (MSOP-8) package. The IMS8 code indicates MSOP-8, and #PBF denotes Pb-free/RoHS-compliant.

Pinout

- Pin count: 8 pins (IMS8 denotes an 8-pin package, MSOP-type).
- Function: 16-bit, single-channel voltage-output DAC with a SPI-like serial input (digital data) input; converts a 16-bit digital word to an analog output voltage using an external reference.

Manufacturer

- Manufacturer: Analog Devices, Inc. (the LTC2641 is a Linear Technology part now under Analog Devices)
- What kind of company: A multinational semiconductor company specializing in analog, mixed-signal, and digital signal processing integrated circuits.

Application

Applications of the LTC2641IMS8-16#PBF (16-bit voltage-output DAC) include:
- Precision instrumentation and data acquisition
- Waveform generation and signal synthesis
- Programmable power supplies and voltage references
- Closed-loop control in automation (motion, valves, heating)
- Calibration, offset/gain adjustment, and sensor interfacing
- Test & measurement, medical, and laboratory instrumentation
- Sensor conditioning and DAC-based analog signaling

Equivalent

There isn’t a published one-to-one cross reference for LTC2641IMS8-16#PBF. Closest substitutes (16‑bit, ~1 MSPS, SPI, MSOP-8) from major vendors:
- TI ADS8320
- TI ADS8321
- Analog Devices AD7641
- TI ADS8324 (variants)
Note: verify exact pinout/Timing/footprint with a cross-reference tool or distributor data to ensure compatibility.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire