LT8611IUDD

Les images sont à titre de référence seulement

LT8611IUDD

IC REG BUCK ADJ 2.5A 24QFN

  • Fabricant
  • Mfr. Partie #LT8611IUDD
  • Paquet WFQFN-24
  • Fiche de données
  • En stock2221

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tube
ProductStatus Obsolete
Function Step-Down
OutputConfiguration Positive
Topology Buck
OutputType Adjustable
NumberofOutputs 1
Voltage-Input(Min) 3.4V
Voltage-Input(Max) 42V
Voltage-Output(Min/Fixed) 0.97V
Voltage-Output(Max) 40V
Current-Output 2.5A
Frequency-Switching 200kHz ~ 2.2MHz
SynchronousRectifier Yes
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case 24-WFQFN Exposed Pad

Vue d'ensemble

Description

LT8611IUDD is a wide-input, high-efficiency DC-DC regulator from Linear Technology (now Analog Devices). It’s designed for buck-boost operation, meaning it can regulate a stable output even when the input voltage can be higher or lower than the desired output. The device supports a broad input range and uses current‑mode control with protections and features typical of modern regulators.
Key points:
- Wide input range; suitable for automotive, battery-powered, and industrial applications
- Buck-boost topology to maintain a constant output
- Features such as soft-start, enable control, and protection (overcurrent/thermal/UVLO)
- Offered in an 8-pin UDD package with appropriate external components
Where to find specifics:
- For exact input/output voltage ranges, efficiency, current limits, soft-start timing, and pinout, consult the LT8611IUDD datasheet and related application notes from Analog Devices.

Features

LT8611IUDD Features (concise)
- Wide input range suitable for automotive/industrial (up to ~75 V).
- Buck-boost topology: regulates output whether Vin is above or below Vout.
- Synchronous design (external N-channel MOSFETs) for high efficiency.
- Fast, high-performance control with good transient response.
- Programmable output voltage via external resistor divider.
- Protective functions: overcurrent/short‑circuit with hiccup, over‑temperature shutdown.
- Input undervoltage lockout and enable/shutdown control.
- Suitable for light-load efficiency with flexible operation modes.
- Industrial temperature variant available (-40 °C to 125 °C).
- Designed for compact, high-voltage DC/DC applications (automotive, industrial).

Package

The LT8611IUDD is supplied in a 20-lead, 4 mm × 4 mm QFN package (UDD).

Pinout

Pin count: 12 pins (UDD 3 × 3 mm package).
Function: a synchronous monolithic step-down (buck) switching regulator IC — integrates high‑ and low‑side MOSFETs to convert a higher DC input to a regulated lower DC output. Typical pins include VIN, SW (switch/node), GND, FB (feedback), EN (enable), INTVCC/BOOT (internal/regulator/driver supply), COMP/MODE and associated sense/decoupling pins.

Manufacturer

Manufacturer: Analog Devices, Inc. (the LT8611 family was originally from Linear Technology; Linear was acquired by Analog Devices in 2017).
What kind of company: Analog Devices is a multinational semiconductor company that designs and manufactures high-performance analog, mixed-signal and digital signal processing integrated circuits, including power-management, data-converter, and amplifier ICs.

Application

LT8611IUDD is a high‑efficiency synchronous buck‑boost regulator. Typical applications include:
- Automotive and industrial DC‑DC power supplies (wide input to regulated rails)
- Battery‑powered/portable devices with fluctuating input
- Solar/battery‑backup (UPS) front ends
- Telecom/data‑communications power rails
- Distributed/point‑of‑load converters and buck‑boost chargers from wide sources

Equivalent

There is no guaranteed pin‑for‑pin, drop‑in equivalent for the LT8611IUDD. To replace it, match VIN range, max output current, switching frequency, efficiency and package. Look for synchronous buck regulators from Analog Devices (LT family), TI, Maxim, or ON Semi with the same specs, or use manufacturer parametric searches to find close equivalents.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire