LM95235DIMM

Les images sont à titre de référence seulement

LM95235DIMM

SERIAL SWITCH/DIGITAL SENSOR, 13

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Rochester Electronics, LLC
Package Bulk
ProductStatus Active
SensorType Digital, Local/Remote
SensingTemperature-Local -40°C ~ 90°C
SensingTemperature-Remote -40°C ~ 90°C
OutputType 2-Wire Serial, I²C/SMBUS
Voltage-Supply 3V ~ 3.6V
Resolution 10 b (Local), 13 b (Remote)
Features One-Shot, Output Switch, Programmable Limit, Shutdown Mode, Standby Mode
Accuracy-Highest(Lowest) ±2°C (±6°C)
TestCondition 25°C ~ 100°C (-40°C ~ 25°C)
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Vue d'ensemble

Description

The LM95235DIMM is a TI (formerly National) DIMM-temperature-monitoring IC. It provides digital temperature sensing for memory modules via an SMBus/I2C interface, so a system MCU/BMC can read DIMM temperatures and take action.
Key points:
- Two temperature-sensing channels with digital outputs
- Programmable high/low alarm thresholds and an alert/interrupt output
- SMBus/I2C slave interface with register-based access
- Designed for DIMMs in servers, workstations, and telecom equipment to help manage cooling and prevent thermal issues
In short, it’s a compact, DIMM-optimized temperature sensor/monitor to enable proactive thermal management on memory modules. For specifics (pinout, timing, register map), consult the LM95235DIMM datasheet.

Features

Here are the typical features of LM95235-DIMM (DIMM temperature monitor):
- I2C/SMBus-compatible digital temperature sensor for DIMMs
- On-board temperature monitoring with programmable alarm thresholds (hysteresis)
- Readable temperature data (high accuracy, typically 1°C steps; broad range)
- Alert/interrupt output to host/controller on over-temp or fault
- Small form-factor suitable for DIMMs; low-power operation
- Configurable I2C address and basic register set for reading status and temperatures
Note: exact sensor count, resolution, and voltage range may vary by revision; consult the current datasheet for precise specs.

Package

LM95235DIMM comes in an 8-pin surface-mount package, typically an SOIC-8 (SOP-8) package designed for DIMM modules.

Pinout

The LM95235DIMM is an 8‑pin device (8 pins). It is a digital temperature sensor/thermostat with an I²C/SMBus interface. Typical pin functions are:
- VCC (power)
- GND (ground)
- SDA (I²C data)
- SCL (I²C clock)
- ALERT/INT (open‑drain thermal alert/interrupt)
- One or two ADDR pins (I²C address selection)
- A thermal output/configuration pin or NC depending on package/options
For the exact pin-to-pin mapping and programmable alarm/monitor features, please consult the official TI datasheet for LM95235DIMM.

Manufacturer

Manufacturer: Texas Instruments (TI).
What kind of company: TI is an American semiconductor company that designs, manufactures and sells integrated circuits and semiconductor devices—primarily analog chips and embedded processors—for industrial, automotive, consumer and communications markets.

Application

Applications of LM95235DIMM:
- Servers and data-center systems (high-density DIMMs)
- Workstations and HPC clusters
- Telecom and network equipment using DIMMs
- Enterprise storage and blade systems
- Any SMBus/I2C DIMM temperature sensing with alert outputs

Equivalent

Possible equivalents (SMBus/I2C digital temp sensors used for DIMMs):
- Analog Devices: ADM1032 / ADM1033; ADT7420 / ADT7422
- TI/Totally TI family: LM75A / LM75B / TMP75
- Maxim: MAX6642 / MAX6643
- Microchip: MCP9808 / MCP9804
- STMicro: STLM75
Note: pinout, resolution, and features vary. Check datasheets for exact compatibility and interface.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire