LM5574MTX

Les images sont à titre de référence seulement

LM5574MTX

IC REG BUCK ADJ 500MA 16TSSOP

  • Fabricant
  • Mfr. Partie #LM5574MTX
  • Paquet 16-TSSOP
  • Fiche de données
  • En stock4837

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT)
Series SIMPLE SWITCHER®
ProductStatus Obsolete
Function Step-Down
OutputConfiguration Positive
Topology Buck
OutputType Adjustable
NumberofOutputs 1
Voltage-Input(Min) 6V
Voltage-Input(Max) 75V
Voltage-Output(Min/Fixed) 1.225V
Voltage-Output(Max) 70V
Current-Output 500mA
Frequency-Switching 50kHz ~ 500kHz
SynchronousRectifier No
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case 16-TSSOP (0.173, 4.40mm Width)

Vue d'ensemble

Description

The LM5574MTX is a Texas Instruments switching regulator controller (PWM controller) used to build non-isolated DC-DC converters. It is a controller IC (not a complete regulator) and typically requires an external MOSFET and external passive components.
Key features (typical):
- Wide input voltage range (high-voltage front end)
- Peak current–mode PWM control
- Adjustable switching frequency
- Protections: overcurrent/short-circuit, undervoltage lockout, thermal shutdown
- Supports buck, boost, and buck-boost topologies in simple designs
- Soft-start to limit inrush and improve EMI
Packaging:
- MTX denotes TI’s tape-and-reel variant of the MTX package (MSOP/TSSOP-16 style, depending on exact variant)
Typical applications:
- Automotive and industrial DC-DC converters
- LED drivers and general power supplies requiring a compact controller with external power FETs
Note:
- For exact electrical specs, pinout, and application guidance, consult the LM5574 datasheet from TI.

Features

Below are common features of the LM5574MTX DC-DC PWM controller (compact summary; refer to the datasheet for exact specs):
- High-voltage current-mode PWM controller for buck/boost/flyback topologies
- Wide input voltage range and high-efficiency operation
- Programmable switching frequency (via RT or external components)
- Internal soft-start to limit inrush and reduce output overshoot
- Protection features: overcurrent/short-circuit protection, overvoltage/undervoltage lockout
- Thermal shutdown for safe operation
- Enable/disable control
- Input/output regulation options with external compensation
- 8-pin MTX/MSOP-style package (lead-free) suitable for compact designs
Note: For precise electrical specs (voltage ranges, current limits, frequency range, and pin details), please consult the official LM5574MTX datasheet.

Package

I don’t have web access to verify package codes right now. May I look up the LM5574MTX datasheet to confirm the exact package type and dimensions?

Pinout

The LM5574MTX is an 8-pin IC (SOIC-8 style). Typical pin functions (per the datasheet) are:
- VIN: supply input
- GND: ground
- SW (Switch): internal power MOSFET switch / inductor node (switch output)
- FB (Feedback): voltage‑feedback input for regulation
- COMP: error‑amp output / loop compensation node
- EN/SHDN: enable / shutdown control
- SS (Soft‑start): soft‑start/time constant pin
- NC or SUBSTRATE: no connect or substrate/thermal tie (package dependent)
Note: exact pin names/positions can vary by manufacturer revision—please refer to the LM5574MTX datasheet for the pin‑out diagram and package mechanical drawing.

Manufacturer

Manufacturer: Texas Instruments (TI).
What kind of company: TI is an American multinational semiconductor company that designs, manufactures and sells analog and embedded processing integrated circuits — including power-management ICs like the LM5574 — for industrial, automotive, consumer and communications markets. It operates design and fabrication facilities and is a major global supplier of analog, mixed-signal and embedded-processor products.

Application

- Off-line switch-mode power supplies (AC adapters)
- Isolated and non-isolated buck/boost/flyback converters
- LED driver circuits (constant-current)
- Battery charging and power-management circuits
- Automotive and industrial power supplies
Also suitable for compact, high-efficiency SMPS designs in consumer electronics and telecom.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire