LM5112SD

Les images sont à titre de référence seulement

LM5112SD

IC GATE DRVR LOW-SIDE 6WSON

  • Fabricant
  • Mfr. Partie #LM5112SD
  • Paquet WSON-6
  • Fiche de données
  • En stock5915

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT),Bulk
ProductStatus Not For New Designs
DrivenConfiguration Low-Side
ChannelType Single
NumberofDrivers 1
GateType N-Channel MOSFET
Voltage-Supply 3.5V ~ 14V
LogicVoltage-VILVIH 0.8V, 2.3V
Current-PeakOutput(SourceSink) 3A, 7A
InputType Inverting, Non-Inverting
Rise/FallTime(Typ) 14ns, 12ns
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case 6-WDFN Exposed Pad

Vue d'ensemble

Description

LM5112SD is Texas Instruments’ dual MOSFET gate-driver IC used to drive a high-side and a low-side N-channel MOSFET in a half-bridge. It uses a bootstrap scheme to power the high-side gate, enabling drive above the switch node. The inputs are TTL/CMOS-compatible and drive two fast, high-current outputs to achieve fast switching. Protective features typically include undervoltage lockout on both channels and overcurrent/thermal protection to guard against fault conditions. Applications include synchronous buck/boost converters, motor-drive bridges, and class-D stages where a floating high-side gate drive is needed. External components include a bootstrap capacitor between VB and VS, plus proper VCC decoupling and layout to minimize parasitics. The “SD” suffix denotes the packaging option (TI’s SD variant, e.g., SOIC-8 or similar).

Features

Here are the typical features of the LM5112SD (gate-driver for half-bridge):
- Dual high-side and low-side MOSFET gate drivers for half-bridge configurations
- Bootstrap supply to drive the high-side MOSFET
- Independent input controls; logic-level inputs compatible with 3.3V/5V logic
- Enable input to disable outputs
- Undervoltage lockout (UVLO) on both channels for reliable startup
- Fault/diagnostic outputs and status feedback
- Short-circuit/current-limit protection and shoot-through prevention (dead-time control)
- Fast rise/fall times and low propagation delay for high-speed switching
- Robust, high‑dV gate-drive performance with good noise immunity
- Suitable packaging (SD suffix) and wide temperature range for automotive/industrial use
- Typical applications: DC-DC converters, motor drives, synchronous rectification in half-bridge topologies
Note: exact electrical specs (voltage range, drive current) vary by variant; consult the datasheet for precise numbers.

Package

LM5112SD comes in an 8-pin Small-Outline Integrated Circuit package (SOIC), typically the D-8 package.

Pinout

- Pin count: 8 pins (in the SD package).
- Function: Dual high-side/low-side MOSFET gate driver (bootstrapped).
- Outputs: HO (high-side gate), LO (low-side gate).
- Floating/high-side supply: VB and VS (VB is the bootstrap supply, VS is the switch node).
- Logic inputs: IN1 and IN2 drive HO and LO.
- Power/return: VCC (logic supply) and GND.
- Notes: Requires a bootstrap capacitor between VB and VS; designed to drive a half-bridge of N-channel MOSFETs.

Manufacturer

The LM5112SD is manufactured by Texas Instruments (TI). TI is an American multinational semiconductor company that designs and manufactures a broad range of analog and embedded processing integrated circuits and related solutions.

Application

LM5112SD is a high-speed dual gate driver for N-channel MOSFETs (bootstrapped high-side and low-side). Application areas:
- High-voltage switching power supplies (synchronous buck/boost, PFC, multi-phase VRMs)
- Motor-drive/inverter stages
- Telecom/server/industrial and automotive DC-DC converters
- Solar/inverter power stages
Key features include UVLO, dead-time control, and shoot-through protection.

Equivalent

Equivalent products to LM5112SD (dual high-side/low-side gate driver with bootstrap) include: IR2110S and IR2101/IR2104 (Infineon/International Rectifier); FAN7392/FAN7394 (ON Semiconductor); HIP4081A/HIP4082 (Renesas Intersil); ST L6384/L6386 (STMicroelectronics). Availability depends on voltage/current ratings and packaging; use TI cross-reference or distributor data to confirm pinout compatibility.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire