LM431BCM3

Les images sont à titre de référence seulement

LM431BCM3

IC VREF SHUNT ADJ 1% SOT23-3

  • Fabricant
  • Mfr. Partie #LM431BCM3
  • Paquet SOT23-3
  • Fiche de données
  • En stock3133

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT),Bulk
ProductStatus Not For New Designs
ReferenceType Shunt
OutputType Adjustable
Voltage-Output(Min/Fixed) 2.495V
Voltage-Output(Max) 37 V
Current-Output 100 mA
Tolerance ±1%
TemperatureCoefficient 50ppm/°C Typical
Current-Cathode 1 mA
OperatingTemperature 0°C ~ 70°C (TA)
MountingType Surface Mount
Package/Case TO-236-3, SC-59, SOT-23-3

Vue d'ensemble

Description

LM431BCM3 is a three-terminal programmable shunt regulator (precision reference) with a 2.495 V reference. It acts like an adjustable zener in a feedback loop, enabling simple, low-cost voltage regulation.
How it works:
- Cathode connects to the output node, anode to ground, and a resistor divider from output to reference pin.
- It holds the reference pin at about 2.495 V, so the output voltage is set by Vout ≈ Vref(1 + R1/R2) + Iref·R1.
- Requires a minimum cathode current to regulate; can sink up to its package limit (tens of milliamps, depending on the device).
Key specs (typical):
- VKA (Cathode–Anode voltage): up to ~36 V
- Vref: ~2.495 V
- Accuracy: ~0.5% (25°C)
- Low dynamic impedance
- Imin ≈ a few mA; Imax limited by package (SOT-23, BCM), typical tens of mA
Package: BCM variant in a 3-pin SOT-23 (M3) package, RoHS-compliant.
Typical uses: linear power-supply regulation, post-regulation, LED drivers, battery chargers, and precision voltage references.

Features

LM431BCM3 is an adjustable precision shunt regulator. Key features:
- 2.495 V reference
- External resistor divider sets output voltage (Vout ≈ 2.5 V to tens of volts, within device limits)
- Cathode current up to about 100 mA (regulation typically requires a minimum ~1 mA)
- Temperature range: -40°C to +125°C
- Vref accuracy typically around ±1% at 25°C (temp dependence specified in datasheet)
- Low dynamic impedance; good line and load regulation
- Internal error amplifier; no external op-amp needed
- Stable with a wide range of output capacitors and ESRs (per application notes)
- Protection: current limiting and thermal/shutdown protection
- 3-pin device, pin-compatible with TL431 family in many packages
Note: exact numbers (max current, voltage range, and accuracy) can vary slightly by package and lot; consult the specific datasheet for your BCM3 variant.

Package

LM431BCM3 comes in a SOT-23-3 (3-pin surface-mount) package.

Pinout

Three pins. It is a programmable shunt regulator (precision adjustable voltage reference). It uses a 2.495 V internal reference and regulates by sinking current from its Cathode to its Anode to keep the Reference pin at ~2.495 V. Terminals: Reference (R), Anode (A), Cathode (K).

Manufacturer

- Manufacturer: Texas Instruments (TI).
- What kind of company: TI is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and embedded processing ICs and related products.

Application

LM431BCM3 is a three-terminal programmable shunt regulator with a ~2.495 V reference. Common applications:
- Adjustable shunt regulator in linear and switching power supplies
- Programmable zener/reference in feedback loops
- Voltage reference for regulators and instrumentation (ADC/DAC)
- Error amplifier/reference in regulator control circuits
- Battery charging and protection circuits
- Overvoltage protection and precision reference in measurement systems

Equivalent

LM431BCM3 is a 2.495V adjustable shunt regulator. Common equivalents (drop-in replacements) include:
- TL431 (and TL431A/B/C)
- TLV431 / TLV431A
- AZ431 (Diodes Inc.)
- KA431
- NCP431 (ON Semiconductor)
- UA431 (Unisonic)
- NJM431 (New Japan Radio)
- LMV431 (and variants)
These are functionally equivalent devices across vendors, differing mainly in packaging and tolerance.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire