LM2903BQDDFRQ1

Les images sont à titre de référence seulement

LM2903BQDDFRQ1

AUTOMOTIVE QUALIFIED DUAL DIFFER

  • Fabricant
  • Mfr. Partie #LM2903BQDDFRQ1
  • Paquet SOT-23-8
  • Fiche de données
  • En stock6472

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
Series Automotive, AEC-Q100
ProductStatus Active
Type Differential
NumberofElements 2
OutputType CMOS, MOS, Open-Collector, TTL
Voltage-SupplySingle/Dual(±) 2V ~ 36V
Voltage-InputOffset(Max) 2.5mV @ 5V
Current-InputBias(Max) 0.025µA @ 5V
Current-Output(Typ) 21mA @ 5V
Current-Quiescent(Max) 600µA
PropagationDelay(Max) 1µs (Typ)
OperatingTemperature -40°C ~ 125°C (TA)
Package/Case SOT-23-8
MountingType Surface Mount

Vue d'ensemble

Description

The LM2903BQDDFRQ1 is TI’s dual low-power voltage comparator (LM2903 family) in an 8‑pin package. It compares two input voltages and drives open-collector outputs.
Key points:
- Dual open-collector outputs; requires external pull-up resistors.
- Wide supply: 2 to 36 V (single-supply operation).
- Input common-mode includes ground; typically up to Vcc−1.5 V.
- Input offset voltage typically around 2 mV (max ~7 mV).
- Output can sink roughly up to ~16 mA; cannot source current.
- Package options include common 8‑pin variants (SOIC/DIP); the Q1 suffix denotes a specific packaging/trace option—check the datasheet for exact details.
Applications: zero-cross and level detectors, window detectors, comparator-based switches, battery-powered sensing, and general threshold detection.
Design notes: use a pull-up resistor on each output, beware of noise (add hysteresis if needed), and ensure inputs stay within the common-mode range. For exact figures and packaging, consult the LM2903BQDDFRQ1 datasheet.

Features

Here are the typical features of the LM2903BQDDFRQ1 (dual comparator in an 8-pin package):
- Dual independent voltage comparators in one package
- Open-collector outputs (requires external pull-up resistors; outputs can be wired-AND)
- Input common-mode range includes ground
- Wide supply voltage range: 2 V to 36 V (single-supply operation)
- Low input bias currents and high input impedance
- Output capable of sinking current with low-side pull-up
- Suitable for a broad operating temperature range (industrial-grade variants available)
- Fast response with short propagation delays (depends on Vcc and load)
- Available in multiple small packages (e.g., 8-pin DIP/SOIC) with RoHS-compliant options
Note: Exact numbers (current, delay, temperature range) vary by variant and packaging; consult the datasheet for the specific “BQDDFRQ1” option for exact specifications.

Package

It’s in an 8-pin Small Outline IC (SOIC-8) package, RoHS-compliant (DDFR variant).

Pinout

Pin count: 8 pins.
Function: LM2903BQDDFRQ1 is a dual low-power comparator with open-collector outputs (two independent comparators). Outputs sink current and require pull-up resistors. Input common-mode includes ground; operating supply range is typically 2–36 V.

Manufacturer

Manufacturer: Texas Instruments Incorporated (TI).
Kind of company: A global American multinational semiconductor company that designs, manufactures, and sells integrated circuits, especially analog and mixed-signal devices.

Application

LM2903BQDDFRQ1 is a dual comparator with open-collector outputs. Common applications include:
- Battery/voltage monitoring (undervoltage/overvoltage)
- Power-supply regulation and reference circuits
- Window and level detectors
- Zero-crossing and AC line sensing
- Overcurrent/overload protection
- Motor/fan speed control and protection
- Thermostats and temperature-control interfaces
- Industrial/automotive sensing and threshold detection

Equivalent

Equivalent parts (dual, open-collector comparators; 2–36 V supply):
- LM393 (TI) – essentially the same
- ST TS393
- ON Semiconductor MC3302
- Fairchild KA393
- New Japan Radio NJM2903 (NJR)
Note: pinouts/package vary; verify datasheets for proper footprint and substitute suitability.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire