IS42S16320F-6TLI

Les images sont à titre de référence seulement

IS42S16320F-6TLI

IC DRAM 512MBIT PAR 54TSOP II

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Active
DigiKey Programmable Not Verified
Memory Type Volatile
Memory Format DRAM
Technology SDRAM
Memory Size 512Mbit
Memory Organization 32M x 16
Memory Interface Parallel
Clock Frequency 167 MHz
Access Time 5.4 ns
Voltage - Supply 3V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case 54-TSOP (0.400", 10.16mm Width)
Supplier Device Package 54-TSOP II
Base Product Number IS42S16320

Vue d'ensemble

Description

The IS42S16320F-6TLI is a 256Mbit (32MB) DRAM chip manufactured by ISSI (Integrated Silicon Solution, Inc.). It is a synchronous dynamic random-access memory (SDRAM) device, featuring a DDR (Double Data Rate) architecture, which allows for higher data transfer rates compared to traditional SDRAM. Designed for high performance, it operates at a clock frequency of up to 200 MHz and supports data rates of 400 MT/s.
The chip is organized as 16 bits x 16 banks and utilizes a 3.3V power supply. It features pipelined architecture, allowing for fast access times and enabling high-speed data processing required in applications like consumer electronics, networking equipment, and computing devices. The device is housed in a compact TSOP II package, making it suitable for space-constrained designs.
Overall, the IS42S16320F-6TLI is widely utilized for its reliability and efficiency in various electronic applications, contributing significantly to system performance enhancement.

Features

The IS42S16320F-6TLI is a 2 Gigabit (256MB) DDR2 SDRAM memory chip, featuring a 16-bit data bus. Key features include:
1. Organization: It is organized as 256K x 16 bits, allowing efficient data handling.
2. Speed: Operates at a memory clock frequency of up to 400 MHz, with a corresponding data rate of 800 MT/s.
3. Voltage: Designed to operate at a low voltage of 1.8V, which helps in reducing power consumption.
4. Package: Available in a 54-ball TFBGA (Thin Fine Ball Grid Array) package, ensuring a compact design suitable for various applications.
5. Burst Mode: Supports burst lengths of 4 and 8, enhancing performance for sequential data access.
6. Latency: Features a CAS latency of 6 cycles, optimizing speed for various applications.
7. Applications: Suitable for use in consumer electronics, networking equipment, and industrial applications requiring reliable and high-speed memory.
These features make the IS42S16320F-6TLI a versatile choice for various high-performance memory applications.

Package

The IS42S16320F-6TLI is packaged in a 54-pin TSOP II (Thin Small Outline Package) format. This package type is designed for surface mounting and is commonly used for DRAM devices in various electronic applications.

Pinout

The IS42S16320F-6TLI is a 16 Meg x 32-bit synchronous dynamic random-access memory (SDRAM) chip. It has a pin count of 84 pins.
The primary functions of the pins include:
1. Data Pins (DQ0-DQ31): These are used for bi-directional data transfer.
2. Address Pins (A0-A11): These determine the address of the memory location being accessed.
3. Control Pins (CLK, CKE, CS, RAS, CAS, WE): These manage the timing and control of read/write operations.
4. Byte Enable Pins (BW0-BW3): These enable writing to specific bytes in the memory.
5. Power and Ground Pins (VDD, VSS): Provide the necessary power supply and ground reference.
This chip operates with a supply voltage of 3.3V and is commonly used in various applications requiring high-density memory solutions.

Manufacturer

The IS42S16320F-6TLI is manufactured by Integrated Silicon Solution, Inc. (ISSI). ISSI is a semiconductor company that specializes in designing and manufacturing a wide range of memory products, including DRAM and flash memory. Founded in 1988 and headquartered in San Jose, California, ISSI serves various markets, including automotive, industrial, telecommunications, and consumer electronics. The company is known for its focus on high-performance memory solutions and has established itself as a key player in the memory semiconductor industry.

Application

The IS42S16320F-6TLI is a 2Mb x 16-bit synchronous DRAM that is typically used in applications such as high-performance computing, networking equipment, consumer electronics, and embedded systems. Its fast data access speeds make it suitable for memory-intensive tasks in graphics applications, telecommunications, and industrial automation, providing efficient data storage and processing capabilities in a compact form factor.

Equivalent

The IS42S16320F-6TLI chip, a 1Gb DDR2 SDRAM, can be equivalently replaced by similar density DDR2 chips such as MT47H16M16, K4T1G164QE, and Hynix HYMD512M646C6. Always verify compatibility in terms of speed, voltage, and pin configuration when considering replacements.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire