IS25WP128F-JBLE

Les images sont à titre de référence seulement

IS25WP128F-JBLE

IC FLASH 128MBIT SPI/QUAD 8SOIC

  • Fabricant
  • Mfr. Partie #IS25WP128F-JBLE
  • Paquet
  • Fiche de données
  • En stock7144

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Active
DigiKey Programmable Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 128Mbit
Memory Organization 16M x 8
Memory Interface SPI - Quad I/O, QPI, DTR
Clock Frequency 133 MHz
Write Cycle Time - Word, Page 800µs
Voltage - Supply 1.65V ~ 1.95V
Operating Temperature -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOIC
Base Product Number IS25WP128

Vue d'ensemble

Description

The IS25WP128F-JBLE is a serial NOR flash memory chip manufactured by ISSI (Integrated Silicon Solution, Inc.). It features a density of 128 megabits (16 megabytes) and operates on a voltage range of 2.7V to 3.6V. The device uses a quad-SPI (Serial Peripheral Interface) interface, which allows for faster data transfer rates compared to traditional SPI by enabling four data lines.
Key features include:
- High Read Speed: Supports up to 104 MHz clock frequency for high-performance applications.
- Low Power Consumption: Designed for low power operation, making it suitable for battery-powered devices.
- Flexible Erase and Program Options: Offers various block sizes for erasing and programming, enhancing versatility for different applications.
- Reliability: Endurance of up to 100,000 program/erase cycles and data retention up to 20 years.
This memory chip is commonly used in embedded systems, consumer electronics, and automotive applications, where reliable, high-speed memory storage is essential.

Features

The IS25WP128F-JBLE is a 128Mb (16MB) serial NOR flash memory device from ISSI. Key features include:
- Interface: Supports a Serial Peripheral Interface (SPI) with quad, dual, and single I/O modes for high-speed data transfer.
- Density: 128Mb capacity with x8 or x16 configurations available.
- Speed: Fast read speeds up to 104 MHz, enabling efficient data access.
- Operating Voltage: Operates between 2.7V and 3.6V, suitable for a variety of applications.
- Endurance: Offers a high endurance level with up to 100,000 program/erase cycles.
- Data Retention: Provides data retention of up to 20 years at 125°C.
- Flexible Architecture: Supports sector and block erase modes for efficient memory management.
- Packages: Available in various packages, including SOP, WSON, and BGA, for versatile integration into designs.
This device is commonly used in consumer electronics, automotive applications, and industrial settings for firmware storage and data logging.

Package

The IS25WP128F-JBLE is packaged in a WSON (Wettable Flank Quad Flat No-Lead) format, specifically a 8mm x 6mm, 24-pin configuration. This package type allows for a compact design and efficient thermal management, suitable for various applications in electronics.

Pinout

The IS25WP128F-JBLE is a serial NOR flash memory device with a total of 8 pins. It is designed for high-density applications and features a SPI (Serial Peripheral Interface) interface. Here’s a brief overview of its pin functions:
1. GND: Ground connection.
2. VCC: Power supply (typically 2.7V to 3.6V).
3. SCK: Serial Clock input for synchronizing communication.
4. CS#: Chip Select (active low) to enable the device.
5. MISO: Master In Slave Out, used for data output to the master.
6. MOSI: Master Out Slave In, used for data input from the master.
7. WP#: Write Protect (active low) to prevent writing to the memory.
8. HOLD#: Hold (active low) to pause communication without deactivating chip select.
This combination of pins allows the IS25WP128F-JBLE to function efficiently in embedded applications where non-volatile memory storage is required.

Manufacturer

The IS25WP128F-JBLE is manufactured by Integrated Silicon Solution, Inc. (ISSI). ISSI is a semiconductor company that specializes in designing and manufacturing integrated circuits (ICs) for various applications, including memory products like NOR Flash and SRAM, as well as analog products. Founded in 1988 and headquartered in San Jose, California, ISSI serves a diverse range of markets, including automotive, industrial, consumer electronics, and telecommunications. The company is known for its focus on high-performance, reliable memory solutions, and it aims to provide innovative products that meet the evolving needs of technology applications.

Application

The IS25WP128F-JBLE is a NOR Flash memory device commonly used in applications such as embedded systems, industrial automation, automotive electronics, consumer electronics, and telecommunications. It provides non-volatile storage for firmware, code execution, and data logging in devices like IoT gadgets, routers, and smart appliances due to its high density and reliability.

Equivalent

The IS25WP128F-JBLE chip is a 128Mb (16MB) NOR Flash memory device. Equivalent products include the Winbond W25Q128JV, Micron MT25QL128ABA, and Spansion S25FL128S. These chips offer similar functionality, capacities, and interfaces (SPI). Always verify specific requirements and features for compatibility.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire