IS25WP064D-JBLE-TR

Les images sont à titre de référence seulement

IS25WP064D-JBLE-TR

IC FLASH 64MBIT SPI/QUAD 8SOIC

  • Fabricant
  • Mfr. Partie #IS25WP064D-JBLE-TR
  • Paquet
  • Fiche de données
  • En stock4329

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Active
Base Product Number IS25WP064
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 64Mbit
Memory Organization 8M x 8
Memory Interface SPI - Quad I/O, QPI, DTR
Clock Frequency 166 MHz
Write Cycle Time - Word, Page 40µs, 800µs
Voltage - Supply 1.65V ~ 1.95V
Operating Temperature -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOIC
Packaging Cut Tape (CT), Tape & Reel (TR)
Grade Automotive
Qualification AEC-Q100

Vue d'ensemble

Description

IS25WP064D-JBLE-TR is ISSI’s 64-Mbit serial NOR flash memory with a SPI interface. It’s designed for storing firmware, code, and data in embedded systems and can serve as boot storage for microcontrollers/SoCs.
Key features:
- 64 Mbit (8 MBytes) non-volatile storage
- SPI-compatible interface supporting standard, dual, and quad I/O modes
- Fast read; page programming (typical 256-byte pages)
- Sector/block erase
- Low power modes and deep power-down
- Security features such as write/block protection
Packaging/variant note:
- The -TR suffix indicates tape-and-reel packaging; -JBLE denotes the device variant/grade.
Typical applications:
- Firmware storage and execution
- Data logging and bulk storage in embedded systems
For exact electrical specs (supply voltage, timing, temperature range, package options) and command set details, consult the IS25WP064D-JBLE-TR datasheet on ISSI’s website.

Features

IS25WP064D-JBLE-TR is a 64‑Mbit (8 MB) serial flash from ISSI. Key features:
- Density: 64 Mbit (8 MB) of non-volatile flash.
- Interface: SPI-compatible; supports standard SPI and Dual/Quad I/O modes for higher throughput.
- Voltage: 2.7–3.6 V operation.
- Temperature: Industrial range option available (-40 °C to +85 °C).
- Memory organization: 256-byte pages; 4 KB sectors; 32 KB/64 KB blocks; chip erase supported.
- Read/Write: Fast/continuous read capability; Page program up to 256 bytes; Write Enable (WREN) required; write protection via WP# and status register.
- Power management: Deep Power-Down mode; standby/low active current.
- Endurance and retention: ~100k P/E cycles; data retention typically ~20 years.
- Security: Block protection, per-block/top-bottom protection options via status register.
- Packaging: 8-pin device; -TR denotes Tape & Reel packaging (ready for automated assembly).
Note: exact speed grades and feature details may vary by package/variant; consult the datasheet for specific part revision.

Package

8-pin SOP (SOIC-8) package, Tape & Reel (TR) version.

Pinout

- Pin count: 8 pins (SOIC-8 / WSON-8, Tape-and-Release variant JBLE-TR).
- Function: 64-Mbit SPI/serial flash memory (IS25WP064D) used to store firmware/data. Pinout: 1 CS#, 2 SO (MISO), 3 WP#, 4 GND, 5 SI (MOSI), 6 SCLK, 7 VCC, 8 HOLD#. WP# and HOLD# are active-low controls for write protection and interface hold, respectively.

Manufacturer

- Manufacturer: Integrated Silicon Solution, Inc. (ISSI).
- What kind of company: A global semiconductor company specializing in memory ICs (such as serial Flash and DRAM) that designs and markets memory products.

Application

IS25WP064D-JBLE-TR is a 64-Mbit SPI NOR flash. Typical applications:
- Firmware storage and updates for microcontrollers/SoCs
- Bootloaders and startup code storage
- External flash memory for consumer electronics (printers, cameras, set-top boxes, wearables)
- Data logging and configuration storage for IoT and industrial equipment
- General external memory for embedded systems and development boards
- Automotive/industrial-grade variants available as required (temperature/qualification per device)

Equivalent

Equivalent 64 Mbit SPI NOR Flash devices (pin and command compatible considerations apply):
- Micron N25Q064A
- Macronix MX25U064E / MX25L064F
- Winbond W25Q64FV / W25Q64JV
- GigaDevice GD25Q64C (also GD25Q64B)
Note: verify voltage (2.7–3.6V), timing, and package in the final substitution.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire