HMC273MS10GETR

Les images sont à titre de référence seulement

HMC273MS10GETR

RF ATTENUATOR 1-31DB 50OHM 10SOP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Obsolete
AttenuationValue 1dB ~ 31dB
FrequencyRange 700 MHz ~ 3.8 GHz
Impedance 50 Ohms

Vue d'ensemble

Description

The HMC273MS10GETR is a digital attenuator integrated circuit manufactured by Analog Devices. It is designed for RF and microwave applications and provides a means to adjust signal levels dynamically. This device operates over a frequency range from DC to 3 GHz and offers a 31.5 dB attenuation range in 0.5 dB steps, making it highly versatile for various signal processing tasks.
Key features of the HMC273MS10GETR include a low insertion loss, high linearity, and excellent attenuation accuracy. The device is controlled via a 6-bit digital interface, allowing precise control over the attenuation levels. It is typically used in systems requiring gain control, signal modulation, or noise figure optimization.
The attenuator comes in a compact MSOP-10 surface-mount package, making it suitable for high-density circuit designs. It is widely used in wireless communication systems, test and measurement equipment, and other RF applications that require reliable and precise signal attenuation.

Features

The HMC273MS10GETR is a versatile RF switch that operates in the DC to 3 GHz frequency range. It features a single-pole, triple-throw (SP3T) configuration, allowing it to route signals between one input and three output paths. Key features include low insertion loss, typically around 1 dB, and high isolation, which helps maintain signal integrity by minimizing crosstalk between channels.
Additionally, the switch is designed with a fast switching speed, usually on the order of nanoseconds, making it suitable for a variety of high-speed applications. It operates with a single positive supply voltage and offers low power consumption. The HMC273MS10GETR comes in a compact MSOP-10 package, making it ideal for space-constrained applications. It is commonly used in wireless communications, test equipment, and other RF applications where reliable signal routing is essential.

Package

The HMC273MS10GETR is a surface-mount package type known as MSOP (Mini Small Outline Package) with 10 leads. It is a compact IC package designed for efficient use of PCB space in electronic applications.

Pinout

The HMC273MS10GETR is a GaAs MMIC SPDT (Single Pole Double Throw) non-reflective switch, which is typically used for RF and microwave applications. It comes in a 10-lead MSOP (Mini Small Outline Package) package. The pin configuration and functions are generally as follows:
1. V1, V2: Control voltage pins, used for switching the RF path.
2. RFC: Common RF input/output port.
3. RF1: RF output/input port 1.
4. RF2: RF output/input port 2.
5. GND: Ground pins, typically multiple to provide a good ground plane.
6. VDD: Positive supply voltage pin.
7. NC: No connect, often present but not electrically connected.
The HMC273MS10GETR switch is designed to operate over a wide frequency range. The specific pin layout can vary slightly between different versions or manufacturers, so always refer to the specific datasheet for detailed pin descriptions and electrical characteristics.

Manufacturer

The HMC273MS10GETR is manufactured by Analog Devices, Inc. Analog Devices is a multinational semiconductor company that specializes in the design and manufacturing of analog, mixed-signal, and digital signal processing (DSP) integrated circuits. The company serves a wide range of industries, including communications, automotive, industrial, healthcare, and consumer electronics. Analog Devices is known for its high-performance products and innovative solutions in signal processing, data conversion, power management, and RF and microwave technologies.

Application

The HMC273MS10GETR is a GaAs MMIC SP8T switch designed for high-frequency applications. It is commonly used in RF and microwave systems, such as wireless infrastructure, test equipment, and communication systems. Its application areas include signal routing in base station transceivers, radar systems, satellite communication systems, and various other RF switching applications where low insertion loss and high isolation are critical. Its features make it suitable for use in devices operating within the DC to 8 GHz frequency range.

Equivalent

The HMC273MS10GETR is a GaAs MMIC SPDT switch. Equivalent products may include the Analog Devices HMC284AMS8E, the Peregrine Semiconductor PE4259, and the Skyworks SKY13317-373LF, among others. These are SPDT switches with similar frequency ranges and performance specifications. Always verify electrical characteristics and pin compatibility before making replacements.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire