HD3SS460RHRT

Les images sont à titre de référence seulement

HD3SS460RHRT

IC MUX/DEMUX 4CH TYPE C2 28WQFN

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Applications USB
Multiplexer/DemultiplexerCircuit 4:6
NumberofChannels 1
On-StateResistance(Max) 14Ohm
Voltage-SupplySingle(V+) 3V ~ 3.6V
-3dbBandwidth 5.4GHz
Features Bi-Directional
OperatingTemperature 0°C ~ 70°C (TA)
MountingType Surface Mount
Package/Case 28-WFQFN Exposed Pad

Vue d'ensemble

Description

HD3SS460RHRT is a Texas Instruments high-speed HDMI TMDS switch/mux. It multiplexes two HDMI sources to a single HDMI sink by switching the four TMDS data lanes (D0–D2) and the TMDS clock with a common select input, enabling simple input-switching in displays and devices.
Key points:
- 2:1 HDMI switch for the TMDS data channels with clock
- Designed for HDMI data rates (HDMI 1.4/2.0 family) with low on-resistance paths and fast switching
- Built-in protections and features for HDMI lines (e.g., ESD protection; hot-plug compatibility)
- Suitable for TVs, monitors, docking stations, set-top boxes, game consoles, tablets/laptops with external displays
Note: The RHRT suffix denotes a specific TI packaging/reel/configuration option. For exact electrical specs, pinout, timing, and application notes, consult the HD3SS460RHRT datasheet on TI’s website.

Features

Here are the key features of HD3SS460RHRT (HD3SS460 family):
- HDMI 2.0 high-speed crosspoint switch with TMDS bandwidth up to 18 Gbps
- Supports HDMI 2.0 features, including 4Kx2K at 60 Hz (4K) and related formats
- HDCP 2.2/1.4 content-protection support
- EDID passthrough with DDC control; HPD and CEC signaling support
- I2C control interface (SMBus-compatible) for configuration and status
- On-chip signal integrity features: equalization and retiming for long cables
- ESD protection on HDMI pins; short‑circuit protection
- Low power/standby modes with convenient power-down control
- Small package option (RHRT) suitable for embedded/compact designs
- 3.3V logic I/O with (where applicable) 5V-tolerant pins
Note: exact input count and timing spec details vary by device variant; verify via the datasheet for the specific application and package.

Package

HD3SS460RHRT is in an HTSSOP-20 package (20-pin). It is RoHS-compliant and shipped in Tape & Reel.

Pinout

Pin count: 16 pins (HTSSOP-16, RHRT).
Function: HD3SS460RHRT is a high‑speed HDMI TMDS switch that multiplexes two HDMI sources to one HDMI sink. It routes the TMDS data channels (D0–D3) and the clock, with control via an I2C/register interface to select the active input. Typically powered from 3.3V.

Manufacturer

- Manufacturer: Texas Instruments Incorporated (TI).
- What kind of company: TI is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and embedded processing integrated circuits. It is one of the world's largest semiconductor firms.

Application

HD3SS460RHRT is a high-speed USB 3.0 switch/mux used to route USB 3.0 (SS) lanes and support USB-C alternate modes. Typical applications:
- USB-C hubs, docks, and adapters
- Smartphones, tablets, and notebooks with USB-C ports
- Automotive infotainment and instrument clusters
- Multimedia hubs for HDMI/DisplayPort passthrough or switching
- Any system needing high-speed differential signal routing (USB 3.0, DP/HDMI in adapters)

Equivalent

HD3SS460RHRT (Renesas) is a high‑speed switch in the HD3SS family for TMDS/HDMI paths. Direct equivalents depend on the exact function (HDMI/DP TMDS switch, USB‑C alt‑mode, MIPI‑DSI, etc.). Please specify: (1) intended interface(s), (2) data rate, (3) package/power, (4) preferred supplier. With that, I can provide precise cross‑references (TI, Analog Devices, NXP, etc.).

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire