FSBB20CH120D

Les images sont à titre de référence seulement

FSBB20CH120D

IGBT IPM 1.2KV 20A 27-PWRDIP MOD

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series Motion SPM® 3
Part Status Not For New Designs
Base Product Number FSBB20
Type IGBT
Configuration 3 Phase Inverter
Current 20 A
Voltage - Isolation 2500Vrms
Mounting Type Through Hole
Package 27-PowerDIP Module (1.205", 30.60mm)
Packaging Tube
Voltage 1.2 kV

Vue d'ensemble

Description

FSBB20CH120D is a dual-channel high-voltage smart power module (half-bridge) from the FSBB family. It integrates two power devices (high- and low-side) and a gate-drive/control circuit in one package, with built-in protections.
Key points:
- Purpose: motor drives, inverters, and other high-power switching applications.
- Features: bootstrap high-side drive, UVLO, overcurrent/short-circuit protection, over-temperature protection, fault reporting.
- Typical use: PWM Inverters and motor control where a compact, protected half-bridge is beneficial.
- Ratings: designed for high blocking voltage (around 1200 V class) and beefy current capability; exact values, packaging, and thermal specs vary by revision.
Note: for precise electrical ratings, pinout, thermal characteristics, and packaging, consult the official datasheet for FSBB20CH120D.

Features

FSBB20CH120D is a STMicroelectronics FSBB high‑voltage IGBT module (dual IGBT with anti‑parallel diodes) for motor drives and inverters. Key features:
- Blocking voltage: 1200 V class
- Current: around 20 A continuous per device (per channel)
- Configuration: dual IGBT + anti‑parallel diodes in one compact module (half‑bridge)
- Fast switching IGBT technology with low conduction losses
- High dv/dt capability and rugged short‑circuit/avalanche performance
- Integrated diodes with fast recovery
- Thermally efficient package with baseplate for good heat sinking
- Electrical isolation between case and pins suitable for power applications
- Operating temperature range typically −40°C to +125°C
- Gate drive: compatible with standard IGBT gate voltages (approx. 10–15 V drive)
Common applications: motor drives, inverters, power supplies, renewable energy converters.
Note: For exact electrical specs (Vcesat, switching times, safe operating area, packaging details, isolation rating) refer to the current datasheet.

Package

Power module. It’s a dual IGBT/diode half-bridge package (FSBB family) containing two IGBTs and two diodes.

Pinout

Pin count: 6 pins.
Function: FSBB20CH120D is a dual IGBT module configured as a half-bridge (two IGBTs with antiparallel diodes). Pins provide Gate 1 (G1), Gate 2 (G2) and the corresponding Emitters (E1, E2) and Collectors (C1, C2) for each leg of the bridge. Used for inverter/motor-drive applications.

Manufacturer

The FSBB20CH120D is manufactured by Fuji Electric Co., Ltd. (Fuji Electric).
Fuji Electric is a Japanese multinational company that designs and produces electrical equipment, with a focus on power electronics, IGBT modules, drives, and industrial control systems for energy, manufacturing, and infrastructure applications.

Application

FSBB20CH120D is a high-voltage, high-current intelligent power module (IPM) with built-in drive (IGBTs/diodes). Applications include:
- Three-phase motor drives (BLDC/PMSM and AC induction)
- Servo drives and industrial automation
- Renewable-energy inverters (solar/wind)
- UPS and power-supply modules (DC–DC or AC–DC)
- General motor-control and power-conversion applications in industrial/hvac equipment

Equivalent

FSBB20CH120D is an ST Microelectronics part from the FSBB family (high‑voltage switch, around 1200 V, ~20 A). There isn’t a single universal cross-reference. To give equivalents, please specify: IGBT or MOSFET, package (e.g., D²PAK/TO‑220), and required ratings (Vce, Ic, switching frequency). With those, I’ll provide closest equivalents from Infineon, ON Semiconductor, Vishay, TI.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire