FOD8316R2V

Les images sont à titre de référence seulement

FOD8316R2V

OPTOISO 4.243KV 1CH GT DVR 16SO

  • Fabricant
  • Mfr. Partie #FOD8316R2V
  • Paquet
  • Fiche de données
  • En stock6150

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Active
Base Product Number FOD8316
Technology Optical Coupling
Number of Channels 1
Voltage - Isolation 4243Vrms
Common Mode Transient Immunity (Min) 35kV/µs
Propagation Delay tpLH / tpHL (Max) 500ns, 500ns
Pulse Width Distortion (Max) 300ns
Rise / Fall Time (Typ) 34ns, 34ns
Current - Output High, Low 2.5A, 2.5A
Current - Peak Output 3A
Voltage - Output Supply 15V ~ 30V
Operating Temperature -40°C ~ 100°C
Mounting Type Surface Mount
Package 16-SOIC (0.295", 7.50mm Width)
Supplier Device Package 16-SO
Approval Agency IEC/EN/DIN, UL
Packaging Cut Tape (CT), Tape & Reel (TR)

Vue d'ensemble

Description

FOD8316R2V is a high‑speed optocoupler/gate‑driver from the FOD family (ON Semiconductor/Fairchild). It provides galvanic isolation between a low‑voltage control side and a high‑voltage power side and is used to drive power MOSFETs/IGBTs in switching applications. The device integrates an LED input and a high‑current output stage capable of sourcing/sinking gate charge, enabling fast, controlled switching with good noise immunity. Typical uses include switch‑mode power supplies, motor drives, and isolated control circuits. The “R2V” suffix usually indicates a revision/package variant, so exact pinout and package options may vary. For precise electrical specs (isolation voltage, input current, CTR, propagation delay, output drive capability, and safe operating areas) and the exact pinout, consult the FOD8316R2V datasheet.

Features

FOD8316R2V is a dual-channel isolated gate driver for IGBTs/METs. Key features (typical, user should check datasheet for exact values):
- Two isolated channels (input side separate from output side)
- galvanic isolation (up to about 5 kV RMS between input/output)
- High peak output current per channel (fast gate drive)
- Logic input compatible with 3.3V and 5V logic
- Output can source and sink current for fast turn-on/turn-off
- UVLO and protection on both sides
- Fast propagation delay with controlled rise/fall times
- Wide operating temperature range (e.g., -40°C to 125°C)
- Package options in 8-pin configurations (R2V variant refers to specific package/format)
For exact numbers (isolation, current, delays, temperature, package), please refer to the official datasheet.

Package

8-pin small-outline package (SOIC/SOP-8), RoHS-compliant.

Pinout

8 pins. It is a high‑speed optocoupler (photocoupler) isolator: an input LED drives a photoreceiver on the output side to provide galvanic isolation between input and output (digital signal transfer).

Manufacturer

- Manufacturer: ON Semiconductor (ON Semi).
- Company type: American multinational semiconductor company that designs and manufactures energy-efficient electronic components (discretes, logic, power management, sensors, optoelectronics).

Application

FOD8316R2V is a high‑speed, isolated gate‑driver/optocoupler for IGBTs/MOSFETs. Typical applications:
- Isolated gate drive for switch‑mode power supplies (AC/DC, DC/DC)
- Motor control and drives (BLDC/stepper) with IGBTs/MOSFETs
- Power inverters (solar, UPS, grid‑tied) and renewable systems
- Industrial automation and robotics requiring HV isolation
- General isolated control between logic and power stages in high‑power converters

Equivalent

FOD8316R2V is an 8-pin high-speed optocoupler (transistor output) from Fairchild/Onsemi. Common cross-references from other vendors include Avago/Broadcom HCPL-817 (and HCPL-0630), Lite-On LTV-817, and NEC PS2501-1. Exact substitution depends on CTR at your IF, isolation voltage, and package—check the datasheets or a distributor cross-reference tool for a precise match.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire