ESP32-WROVER-IB

Les images sont à titre de référence seulement

ESP32-WROVER-IB

RX TXRX MODULE WIFI U.FL SMD

  • Fabricant
  • Mfr. Partie #ESP32-WROVER-IB
  • Paquet
  • Fiche de données
  • En stock7681

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Espressif Systems
Package Tape & Reel (TR),Cut Tape (CT)
Series ESP32
ProductStatus Not For New Designs
RFFamily/Standard Bluetooth, WiFi
Protocol 802.11b/g/n, Bluetooth v4.2 +EDR, Class 1, 2 and 3
Modulation CCK, DSSS, OFDM
Frequency 2.4GHz ~ 2.5GHz
DataRate 150Mbps
Power-Output 20dBm
Sensitivity -98dBm
SerialInterfaces GPIO, I²C, I²S, PWM, SDIO, SPI, UART
AntennaType Antenna Not Included, U.FL
UtilizedIC/Part ESP32-D0WD
MemorySize 448kB ROM, 536kB SRAM
Voltage-Supply 2.7V ~ 3.6V
MountingType Surface Mount
OperatingTemperature -40°C ~ 65°C

Vue d'ensemble

Description

ESP32-WROVER-IB is Espressif’s ESP32-WROVER family module, a dual‑core LX6 MCU with built‑in 2.4 GHz Wi‑Fi and Bluetooth (classic/BLE) and added external PSRAM. It’s designed for memory‑heavy IoT/edge apps where standard WROOM variants may fall short.
Key points:
- CPU and connectivity: dual‑core Xtensa LX6 up to ~240 MHz; Wi‑Fi 802.11 b/g/n and Bluetooth Classic/BLE.
- Memory: external PSRAM on the module (plus onboard flash). Memory size varies by variant.
- Peripherals: wide GPIO, UART/SPI/I2C/I2S, PWM, ADC/DAC, touch sensors, SDIO, etc.
- Power/voltage: operates at 3.3V logic; low‑power modes available.
- Software support: ESP-IDF, Arduino core, MicroPython, etc.
- Use cases: memory‑intensive IoT, audio/data buffering, image/video processing, edge AI, sensors, gateways.
- Variant note: IB is a specific revision/temperature/antenna option; check the datasheet for exact memory, antenna type, and operating range.
In short: a high‑RAM ESP32 module for demanding IoT/edge applications.

Features

Key features of ESP32-WROVER-IB (ESP32-WROVER family):
- Dual-core Xtensa LX6 CPU up to 240 MHz
- 520 KB internal SRAM + external PSRAM (typical up to 8 MB); external SPI flash (configurable sizes, usually 4–16 MB)
- 2.4 GHz Wi‑Fi (802.11 b/g/n) and Bluetooth BR/EDR + BLE
- Rich I/O and peripherals: GPIOs, SPI, I2C, I2S, UART, CAN, PWM, ADC (12‑bit), DAC, touch sensors, SDIO/SD card
- Ultra-low-power with ULP co-processor and multiple sleep modes
- Hardware crypto accelerators (AES, SHA, RSA, ECC) and RNG; secure boot and flash encryption
- OTA updates and multi-boot/partition support
- Broad development support: ESP-IDF and Arduino cores; JTAG debugging; strong ecosystem
- Module integrates RF front-end and antenna; compact form factor
Note: exact RAM/PSRAM/flash sizes vary by module variant; the WROVER family commonly uses external flash and PSRAM options.

Package

The ESP32-WROVER-IB is a metal-shielded surface-mount (SMT) castellated PCB RF module — a ready-to-solder, shielded Wi-Fi/Bluetooth module.

Pinout

ESP32‑WROVER‑IB is a 38‑pin surface‑mount module. Key pin functions (per datasheet):
- Power/ground: 3.3V VCC, multiple GND pins, EN/CHIP_EN (reset/enable), IO0 (boot mode).
- UART: TX0/RX0 (GPIO1/GPIO3) and other UARTs on generic GPIOs.
- SPI/I2S/SDIO: SPI0/1, I2S and SDMMC interfaces for peripherals and storage.
- PSRAM/Flash interface: dedicated pins for external PSRAM and flash (GPIO6–GPIO11 used internally; not for general I/O).
- GPIO: many multifunctional GPIOs supporting PWM (LEDC), ADC (12‑bit ADC1 & ADC2), two DAC channels, touch sensors (T0–T9), RTC GPIOs.
- Other: I2C (via GPIOs), CAN, Ethernet MAC (RMII signals available on pins), JTAG (MTDI/MTCK/MTMS/MTDO).
For exact pin numbering, electrical characteristics and reserved pins (notably GPIO6–11), consult the official Espressif ESP32‑WROVER datasheet and module pinout diagram.

Manufacturer

Manufacturer: Espressif Systems.
What kind of company: Espressif is a Shanghai‑based fabless semiconductor company that designs Wi‑Fi and Bluetooth SoCs and integrated IoT modules (the ESP32 family) for embedded and Internet‑of‑Things applications.

Application

ESP32-WROVER-IB is a Wi‑Fi/Bluetooth dual‑core MCU with PSRAM, suited for:
- IoT and home automation (sensors, lighting, thermostats)
- Industrial monitoring and data logging
- Edge computing and gateways (local processing, MQTT, local web server)
- Multimedia and lightweight AI at the edge (audio, sensor fusion)
- Prototyping and DIY projects (wearables, asset tracking, smart devices)

Equivalent

Equivalent products include other Espressif WROVER-family modules with PSRAM and matching pinout: ESP32-WROVER, ESP32-WROVER-B, ESP32-WROVER-IE (and their -U/-D antenna variants). Third‑party compatibles using the same ESP32 + PSRAM include Ai‑Thinker, DOIT, LilyGO (TTGO WROVER) and Heltec WROVER modules. Verify datasheets for exact pin/antenna/flash/PSRAM matches.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire