EPM7256AETC100-10

Les images sont à titre de référence seulement

EPM7256AETC100-10

IC CPLD 256MC 10NS 100TQFP

  • Fabricant
  • Mfr. Partie #EPM7256AETC100-10
  • Paquet 100-TQFP
  • Fiche de données
  • En stock2442

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Intel
Package Tray
Series MAX® 7000A
ProductStatus Obsolete
ProgrammableType In System Programmable
DelayTimetpd(1)Max 10 ns
VoltageSupply-Internal 3V ~ 3.6V
NumberofLogicElements/Blocks 16
NumberofMacrocells 256
NumberofGates 5000
NumberofI/O 84
OperatingTemperature 0°C ~ 70°C (TA)
MountingType Surface Mount
Package/Case 100-TQFP

Vue d'ensemble

Description

Introduction to EPM7256AETC100-10:
- Type: Altera/Intel EPLD (EPM7256A family), a small, reprogrammable logic device.
- Key specs: 256 macrocells, 100-pin TQFP package (ETC), 3.3V operation, speed grade -10 (slower end of the range).
- Purpose: implement glue logic, simple state machines, decoders, counters, and interface logic between components.
- Programming: configured with Altera/Intel tools (Quartus II or older MAX+PLUS II) using programmers such as ByteBlaster or USB-Blaster; in-system/in-circuit programming may be supported via JTAG/AS interfaces on board.
- Notes: older/legacy device family; tool support and availability may be limited compared to modern devices. Suitable for retro designs or educational projects needing small, custom logic.

Features

Here are the main features of the EPM7256AETC100-10 (MAX II CPLD):
- High-density CPLD in 100-pin TQFP package, part number EPM7256AETC100-10
- 256 macrocell-based logic fabric for flexible, low-cost digital design
- On-chip non-volatile configuration memory (FPROM) for in-system reconfigurability; supports serial configuration (FPS/Active Serial) with no external config memory needed
- Flexible I/O banks capable of supporting standard CPLD I/O levels (typical 3.3V and 2.5V signaling; some pins 5V-tolerant depending on bank)
- JTAG boundary-scan for programming and debugging
- In-system programmable and reconfigurable design flow using standard tools (Quartus II/Intel design software)
- Low power consumption and small form factor suitable for space- and cost-constrained designs
- General-purpose registers, combinational logic, simple state machines, and routing resources for rapid prototyping
Note: Exact I/O counts per bank and voltage/tolerance specifics depend on the device’s bank configuration; consult the datasheet for precise electrical characteristics.

Package

It uses a 100-pin TQFP (Thin Quad Flat Pack) package.

Pinout

- Pin count: 100 pins (TQFP-100)
- Function: Altera MAX 7000A family 256-macrocell EPLD/CPLD device for implementing general digital logic (glue logic, etc.).

Manufacturer

- Manufacturer: Altera Corporation (now part of Intel Corporation).
- Company type: Semiconductor company specializing in programmable logic devices (PLDs), including EPLDs/CPLDs and FPGAs.

Application

Typical applications for the EPM7256AETC100-10 CPLD include:
- Glue logic for microprocessors/ASICs (address decoding, bus interfacing)
- Simple state machines and control logic
- I/O expansion and peripheral interfaces (LEDs, displays, GPIO)
- Timing utilities: counters, timers, PWM
- Clock-domain crossing and timing alignment
- Prototyping, development boards, and educational projects

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire