DTC114EETL

Les images sont à titre de référence seulement

DTC114EETL

TRANS PREBIAS NPN 150MW EMT3

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Rohm Semiconductor
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
TransistorType NPN - Pre-Biased
Current-Collector(Ic)(Max) 50 mA
Voltage-CollectorEmitterBreakdown(Max) 50 V
Resistor-Base(R1) 10 kOhms
Resistor-EmitterBase(R2) 10 kOhms
DCCurrentGain(hFE)(Min)@IcVce 30 @ 5mA, 5V
VceSaturation(Max)@IbIc 300mV @ 500µA, 10mA
Current-CollectorCutoff(Max) 500nA
Frequency-Transition 250 MHz
Power-Max 150 mW
MountingType Surface Mount
Package/Case SC-75, SOT-416

Vue d'ensemble

Description

DTC114EETL is a digital NPN transistor from ROHM (DTC series) with built-in input bias resistor. It lets you drive a load directly from a microcontroller without an external base resistor (and often with a base-emitter resistor to help keep the output off when the input floats). The device provides an open-collector output that sinks current when the input is high. The “TL” suffix typically denotes a lead-free, tape-and-reel (SOT-23-3) package variant.
Key points:
- No external base resistor needed; simple MCU interface.
- Internal base biasing helps protect the MCU and stabilize operation.
- Suitable for switching small loads (LEDs, relays, low-power signals) at moderate voltages/currents within the datasheet limits.
- Check the datasheet for exact Vceo, Ic, and switching characteristics.
How to use: connect emitter to ground, collector to the load (load to supply), and drive the input from the MCU. When input is high, it sinks load current; when low, it turns off.

Features

DTC114EETL features (concise):
- NPN digital transistor with built-in base resistor (no external base resistor needed)
- Optional built-in base-emitter bias resistor for stable off-state
- TTL/CMOS logic level input compatibility
- Direct-drive capability for small loads (LEDs, relays, transistors)
- Fast switching with low input current and compact SOT-23 package
- RoHS-compliant, tape-and-reel packaging (ETL)
- Suitable for applications requiring reduced external components and simple interfacing
Note: For exact Ic, Vceo, hFE, and electrical limits, refer to the official datasheet.

Package

Package type: SOT-23 (3-pin) surface-mount, Pb-free (lead-free).

Pinout

- Pin count: 3 pins (SOT-23-3 package)
- Function: NPN digital transistor with a built-in base resistor; acts as a driver/switch. It can be driven directly from a logic signal; emitter typically to ground, collector to the load (to Vcc). The internal base resistor limits base current.

Manufacturer

Manufacturer: ROHM Semiconductor (ROHM Co., Ltd.).
What kind of company: A Japanese multinational company that designs and manufactures semiconductors and electronic components (discretes, ICs, LEDs, power devices, etc.).

Application

DTC114EETL is a digital transistor with a built-in base resistor. Common uses:
- Directly drive LEDs/indicators from microcontrollers
- Switch small loads (relay coils, transistors, optocouplers) in low-current circuits
- Interface TTL/CMOS logic to higher-current devices with improved noise immunity
- Simplify designs by eliminating external base resistors in embedded applications

Equivalent

DTC114EETL is a NPN digital transistor with built-in base resistors. Common equivalents (same footprint) include:
- ON Semiconductor: PDTC114E and PDTC114EL
- Renesas/DTC-series digital transistors
- Rohm DTC-series digital transistors
For an exact cross, please provide V_CE, I_C, and packaging. I can then give precise alternative part numbers.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire