DS75176BTM

Les images sont à titre de référence seulement

DS75176BTM

IC TRANSCEIVER HALF 1/1 8SOIC

  • Fabricant
  • Mfr. Partie #DS75176BTM
  • Paquet SOIC-8
  • Fiche de données
  • En stock2011

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tube,Tube
ProductStatus Obsolete
Type Transceiver
Protocol RS422, RS485
NumberofDrivers/Receivers 1/1
Duplex Half
ReceiverHysteresis 70 mV
Voltage-Supply 4.75V ~ 5.25V
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Vue d'ensemble

Description

The DS75176BTM is a high-speed, half-duplex transceiver designed for use in RS-485 and RS-422 communication systems. It facilitates differential signaling, which enhances noise immunity and allows for longer communication distances compared to single-ended systems. This device operates over a wide voltage range (typically 4.75V to 5.25V) and supports data rates up to 10 Mbps, making it suitable for various industrial and commercial applications.
Key features include low power consumption, thermal shutdown protection, and the ability to drive multiple loads on a bus with its high output drive capability. The DS75176BTM can be used in multipoint systems, where multiple devices share a common communication line, and provides a robust solution for reliable data transmission in environments with electrical noise. Its small package size and integrated design make it ideal for space-constrained applications in automation, telemetry, and sensor networks.

Features

The DS75176BTM is a dual differential line driver/receiver designed for use in RS-485 and RS-422 communication systems. Key features include:
1. High-Speed Operation: Supports data rates up to 10 Mbps.
2. Differential Signaling: Offers improved noise immunity and reduces electromagnetic interference.
3. Low Power Consumption: Designed for low power operation, ideal for battery-powered devices.
4. Wide Operating Voltage: Operates over a supply voltage range of 4.75V to 5.25V.
5. Integrated Protection: Features built-in short-circuit protection and failsafe design.
6. Temperature Range: Operates across a wide temperature range, typically from -40°C to +85°C.
7. Multiple Drivers/Receivers: Supports up to 32 nodes on the bus for multi-point communication.
The DS75176BTM is widely used in industrial automation, telecommunications, and data acquisition systems, ensuring robust and reliable data transmission.

Package

The DS75176BTM is packaged in a 14-pin TSSOP (Thin Shrink Small Outline Package).

Pinout

The DS75176BTM is a differential bus transceiver that features a 16-pin dual in-line package (DIP). Its primary function is to facilitate communication over a balanced differential signaling line, making it suitable for applications like RS-485 and RS-422 protocols.
Pin Count and Functions:
- Pins: 16
1. A (Pin 1): Non-inverting differential output.
2. B (Pin 2): Inverting differential output.
3. Y (Pin 3): Non-inverting receiver input.
4. Z (Pin 4): Inverting receiver input.
5. RE (Pin 5): Receiver enable (active low).
6. DE (Pin 6): Driver enable (active high).
7. DI (Pin 7): Driver input.
8. RO (Pin 8): Receiver output.
9. GND (Pin 9): Ground.
10. VCC (Pin 10): Supply voltage.
11-16: Additional pins include unused pins or connections for specific configurations and should refer to the datasheet for details.
This device enables robust communication in noisy environments, supporting multi-point communication architectures.

Manufacturer

The DS75176BTM is manufactured by Texas Instruments (TI), a leading technology company that specializes in semiconductor design and manufacturing. Texas Instruments is known for its development of analog, embedded processing, and digital signal processing (DSP) technologies. The company serves a wide range of industries, including automotive, industrial, communications, and consumer electronics. Founded in 1930, TI has a long history of innovation and is recognized for its contributions to the development of integrated circuits and various electronic components. The DS75176BTM itself is a differential line driver and receiver designed for high-speed data communication, often used in RS-485 applications.

Application

The DS75176BTM is a differential line transceiver primarily used in RS-485 and RS-422 communication systems. Its application areas include industrial automation, data acquisition systems, and long-distance data transmission in noisy environments. It is also utilized in telecommunications, building automation, and networks requiring multi-point communication, where robust and reliable data transfer is essential.

Equivalent

The DS75176BTM is a differential line driver/receiver for RS-485/RS-422 communication. Equivalent products include:
1. SN75176B
2. MAX1343
3. LTC2862
4. ADM2483
5. DS3690
These chips offer similar functionality for differential signaling in data communication applications.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire